不同剂量A群脑膜炎球菌多糖菌苗的反应

应用30和50μg A 群脑膜炎球菌多糖菌苗,接种不同年龄组儿童和青少年、观察其全身和局部反应及大面积普种的异常反应。结果表明:接种30和50μg 菌苗后全身和局部反应轻微,两种剂量的接种反应无差别,仅有两个点接种两个不同年龄组时出现50μg 的全身及局部反应高于30μg。普种50多万人均未发生异常反应。     

仿瓷胶粘剂的研究

本文介绍一种仿瓷环氧胶粘剂,该胶耐酸耐碱,可室温固化,在室温下粘接不锈钢试样,其剪切强度可达30.7MPa;而在130℃时其剪切强度为1.7MPa。可用于修复搪瓷,粘接金属和陶瓷等。     

国内外聚碳酸酯市场及需求分析

聚碳酸酯(PC)综合性能好,其消费与生产增长举世瞩目,在世界五大通用工程塑料中占有重要地位。国内PC生产及消费量虽不大,但潜在市场不可忽视,发展与开拓工程塑料,特别是PC的应用与生产的开发,是我国化学和石化工业发展需要之一。     

Oxidation Performance of Fe-Al/WC Composite Coatings Produced by High Velocity Arc Sprayed at 650 ℃

Fe-Al intermetallics with remarkable high-temperatureintensity and excellent erosion,high-temperatureoxidation and sulfuration resistance are potential lowcost high-temperature structural material.ProducingFe-Al/WC composite coating by high velocity arcspraying(HVAS)on structural materials would notonly obviate the problems faced in fabrication of thesealloys into useful shapes,but also allow the effectiveuse of their outstanding high-temperature performance,which might thus promisingly mak…     

Cu-Zn-Al形状记忆合金直接淬火和分级淬火后马氏体稳定性的研究SCIEI

用透射电镜,X射线衍射仪和电阻法研究了Cu-14.84wt-％Zn-7.75wt-％Al形状记忆合金在直接淬火和分级淬火后马氏体的稳定性。试验结果表明,直接淬火和分级淬火(150℃,2min)后于室温时效约3h的马氏体均为M18R结构,但刚直接淬火后马氏体并不稳定,其某些衍射峰位置和电阻率均随室温时效而变化;而分级淬火(150℃,2min)后马氏体是稳定的,其所有衍射峰位置和电阻率几乎不随室温时效而变化。上述结果可用“马氏体再有序化机制”解释。     

Ti和V对Fe中氢与位错交互作用的影响

研究了Fe-0.5wt-%Ti和Fe-0.5wt-%V合金中由氢与位错交互作用所形成的氢致冷加工内耗峰(H-CWP)。实验结果表明:合金元素对H-CWP、对氢与位错之间的交互作用有显著的影响,与氢作用愈强的元素,对H-CWP的影响愈大,内耗实验结果与力学性能之间存在着一定的联系.     

Temperature Dependence of the Magnetocrystalline Anisotropy in Nd_2Co_(14)B Compound

Easy and hard magnetization curves of Nd_2Co_(14)B compound have been measured withextracting-sample-magnetometer(μ_0H_(max)=6T)at 10～300 K.Magnetic anisotropy constants K_1 and K_2have been determined by fitting the hard magnetization curves,in which only K_1 ,K_2 and misalignment anglehave been taken as fitting parameters.The values of K_1 and K_2 at 4.2 K were derived by extrapolation.Anisotropy coefficients,x_2~° and x_4~°were derived from the anisotropy constants.The anisotropy constant K_2increases rapidly with increasing temperature when TT_(sr).The temperature depen-dence of the magnetic anisotropy coefficient x_2~° was fitted with the formula.The anisotropy coefficients x_2~°can be well described by the tenth-power law from 4.2 K to T_(sr)and by the sixth-power law from T_(sr_ to 300 K.     

车轮的热烈和磨损机理与抗热裂耐磨车轮的研制

本文研究了车轮踏面的热裂和磨损机理,结果表明,车轮热裂主要与其含碳量和硬度有关;在使用合成闸瓦时,车轮踏面的磨损率与新形成的“白层”(马氏体)的断裂韧性有关。研制的抗热裂耐磨车轮(55SiMn)取得了明显的运用效果。     

IMPROVEMENT ON FATIGUE LIFE OF ALLOY LY12CZ AFTER LASER RADIATION AND ITS DAMAGE EVOLUTION

The change of microstructure of fatigue specimens before and after laser radiation was studiedby transmission electron microscopy.The results show that the diameter of dislocation cell λtends to a constant at fatigue failure.Based on the principles of continuous damagemechanics,expressions of the fatigue damage criterion and processes of fatigue damage evolu-tion for L Y12CZ have been derived.     

AGING BEHAVIOUR OF PARTICULATE REINFORCED ALUMINUM ALLOY MATRIX COMPOSITES

The process of aging precipitation in SiC_p/6061 and Al_2O_3/6061 composites were investigated. Hardness testing, differential scanning calorimetry(DSC) and transmission electron microscopy were employed. Results showed that the precipitation phase form directly along dislocation lines in the composites because the particles produce high densities of dislocations which makes vacancy densities in the composites decrease, and the main precipitation phase at peak hardness was β′ phase.