低毒磷酸三甲苯酯的研制

为解决传统的磷酸三甲苯酯的毒性问题，开展研究和试验工作，开发出新型低毒产品。经检验，产品达到化工部部标一级品，ＬＤ５９０试验为低毒性，其阻燃性和增塑性相当于或好于国内同类产品。     

利用立体图分析马蹄焰窑蓄热室内流场分布

介绍了一种能直观、形象地反映蓄热室流场分布的新方法－把离散的实验数据绘制成透视立体图。对蓄热室流场的改善结果利用立体图进行了分析，认为流场分布立体图为流场改善程度的判断提供了一个有力的依据。     

提高产品合格粒级产率的试验研究

扼要介绍了某选厂碎磨试验研究的情况．并根据研究结论，提出了该厂技术改造应当采用的流程与设备方案，以提高产品合格粒级产率。     

Agricultural residue-derived lignin as the filler of polylactic acid composites and the effect of lignin purity on the composite performance

In this study, corn stover lignin with different purities was used as filler in polylactic acid (PLA) matrix. It was found that the impurity metals present in unpurified lignin can significantly affect the performance of the composites in terms of their thermal stability, rheological behavior, mechanical properties, and hydrophobicity. Among the PLA composites, the ones fabricated with the lignin containing 4% of impurities overall had the best thermal stability and tensile strength. From melt rheology analysis, it was also found that the presence of the impurity metals decreases the complex viscosity of the composites. It is suggested that the impurity metals acted as catalysts to promote the interaction between lignin and PLA, resulting in an improved compatibility between PLA and the filler. In the present study, mechanical properties and hydrophobicity of the composites were further improved by acetylating the lignin with the optimum content of impurities. Tensile strength of the composite with the acetylated lignin was comparable to that of pure PLA, whereas the modulus increased to as high as 2.75 GPa. Overall, the study showed that unpurified lignin could be used as filler to achieve similar or better performance than the composites made with highly purified lignin fillers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47915.     

电磁动态塑料混炼挤出机性能分析

本文从原理结构、整机性能、制品性能分析了电磁动态塑料混炼挤出机性能的优越性。     

Novel Ag-AgBr decorated composite membrane for dye rejection and photodegradation under visible light

Photocatalytic membranes have received increasing attention due to their excellent separation and photodegradation of organic contaminants in wastewater. Herein, we bound Ag-AgBr nanoparticles onto a synthesized polyacrylonitrile-ethanolamine (PAN-ETA) membrane with the aid of a chitosan (CS)-TiO₂ layer via vacuum filtration and in-situ partial reduction. The introduction of the CS-TiO₂ layer improved surface hydrophilicity and provided attachment sites for the Ag-AgBr nanoparticles. The PAN-ETA/CS-TiO₂/Ag-AgBr photocatalytic membranes showed a relatively high water permeation flux (~ 47 L·m^–2·h^–1·bar^–1) and dyes rejection (methyl orange: 88.22%; congo red: 95%; methyl blue: 97.41%; rose bengal: 99.98%). Additionally, the composite membranes exhibited potential long-term stability for dye/salt separation (dye rejection: ~97%; salt rejection: ~6.5%). Moreover, the methylene blue and rhodamine B solutions (20 mL, 10 mg·L⁻¹) were degraded approximately 90.75% and 96.81% in batch mode via the synthesized photocatalytic membranes under visible light irradiation for 30 min. This study provides a feasible method for the combination of polymeric membranes and inorganic catalytic materials.     

Separation of copper from cobalt in sulphate solutions by using CaCO3

Lime neutralization is widely used to precipitate heavy metals including copper and cobalt from wastewater. Limestone (calcium carbonate: CaCO₃) is too stable to be used directly for this purpose. Grinding of CaCO₃ in the solutions of copper and cobalt sulphate was conducted to raise its reactivity. During the mechanochemical activation, CaCO₃ reacted with copper sulphate but not significantly with cobalt sulphate and this phenomenon allowed an easy separation of copper from cobalt. The residual of Cu(II) ions in solution could be controlled at less than 0.1%, meanwhile more than 90% of the Co(II) ions remained in aqueous solution.     

Zinc-Deficiency Induced g-C3N4 Nanosheets: Photocatalytic Nitrogen Fixation Study and Carrier Dynamics

Catalysis Letters - g-C3N4 has great application prospect in the field of photocatalytic nitrogen fixation owing to the advantages of abundant raw materials, low toxicity, low consumption, high...     

Hydroxyl Groups Promoted Ag Dispersion and Excellent Performance of Ag/Al2O3 Catalyst for HCHO Oxidation

Catalysis Letters - Hydroxyl groups are considered as anchoring sites for active components on catalysts. Guided by this viewpoint, 4 wt. % Ag/Al2O3 catalyst derived from Boehmite (AlOOH) was...