车间调度下流水线制造系统的仿真研究

在车间调度的基础上，采用事件调度法仿真策略，对流水线制造系统的仿真进行研究。     

注硼中子寿命测井技术在华北油田的应用与发展

注硼中子寿命测井技术是近几年发展起来的一项用于测量开发井水淹状况 ,分析层间油水关系 ,根据其结果采取合理措施降水增油的新技术。该技术在华北油田推广应用以来 ,取得了较好的效果。在应用过程中 ,不断优化选井原则 ,优选注硼参数和测注工艺 ,突出综合对比解释 ,进一步提高了工艺技术应用的合理性、准确性以及解释结果的吻合性 ,一定程度上丰富了注硼中子寿命测井理论 ,促进了该项技术的完善与提高     

注硼中子寿命测井注硼工艺优化设计

注硼中子寿命测井是一项水淹层测井新技术 ,对老油田的产层分析评价、剩余油含量估算等方面发挥了重要的作用。但测井施工时 ,往往由于注硼工艺不当导致硼酸的渗吸量难以准确反映地层可动水的含量 ,从而产生解释上的困难和误区。在渗流与扩散理论相结合的基础上 ,结合华北油田的施工实践 ,介绍了确定注硼管柱、硼酸用量、注硼压力以及硼酸扩散时间的基本原则和实际经验 ,为工艺的优化设计提供了一些方法与思路     

Fuel management of the HTR-10 including the equilibrium state and the running-in phase

The mode of fuel management of the HTR-10 was studied, including the simulation of the fuel shuffling process and the measurement of the burnup of a fuel element. The prior consideration was the design of the equilibrium state. Based on this the fuel loading of the initial core and the fuel shuffling mode from the initial core through the running-in phase into the equilibrium state were studied. The code system VSOP was used for the physical layout of the HTR-10 at the equilibrium state and in the running-in phase. For the equilibrium state, in order to lessen the difference between the peak and the average burnup, 5-fuel-passage-through-the-core was chosen for the fuel management. The average burnup of the spent fuel for the equilibrium core is 80 000 MWd t⁻¹, and the peak value of it is less than 100 000 MWd t⁻¹ when the burnup of the recycled fuel element is under 72 000 MWd t⁻¹. The mixture of fuel element and graphite element was used for the initial core loading, the volume fractions of the fuel and the graphite elements were 0.57 and 0.43, respectively. During the running-in phase, the volume fraction of graphite will decrease with the fresh fuel elements being loaded from the top of the core and the graphite elements discharged from the bottom of the core. The fuel shuffling mode is similar to that of the equilibrium state. The burnup limit of recycled fuel element is also 72 000 MWd t⁻¹ and the peak burnup is less than 100 000 MWd t⁻¹. Finally the core will be full of fuel elements with a certain profile of burnup and reaches the equilibrium state. According to the characteristics of the pebble-bed high temperature gas-cooled reactor, a calibrating method of concentration of ¹³⁷Cs was proposed for the measurement of fuel burnup.     

再论“用离心机作静力结构模型试验”

 本文通过最近所作的两个离心模型试验,进一步探讨了用离心机作静力结构模型试验的有关问题,试验结果进一步证明用离心机作静力结构模型试验,无论在理论上和试验技术上都是可行的,最后将有关问题作了进一步的讨论。     

对高炉冷却壁设计参数的探讨

通过炉衬、冷却壁、炉壳等与炉内温度之间的传热计算，对冷却壁的设计参数进行了搪塞分析，并提出了推荐的冷却壁设计参数。     

利用液晶光阀实现的光学形态变换

提出了基于液晶光阀的光学二值图像领域处理器，利用它完成了扩、蚀和边缘检测等形态变换操作，并给出了实验结果。     

钻井液与油气层损害及保护室内研究中的数学方法

介绍了在钻井液与油气层损害及保护研究领域里常用的数种具有推广应用价值的数学方法，说明了各种方法的基本原理及其在此研究领域中的具体应用成果。     

低压低渗气藏钻探过程中的保护方案

针对鄂尔多斯塔巴庙区块低压低渗气藏物理特性复杂的情况，推荐一套切实可行的气层保护方案。即实行全面钻井液监控；采用欠平衡钻井技术；储层保护前期研究；采用与地层流体配伍性好的阳离子钻井液体系；降低钻井完井液的滤失量，API滤失量小于5mL、高温高压滤失量小于15mL、固相含量小于8％、含砂量小于0．3％；根据储层裂缝的宽度和走向使用保护剂；对裸眼完钻的气层利用洗井清除井壁附近的污染带，恢复储层原始渗透率；固井作业防止气窜；采用具有抑制地层水敏、速敏保护气层的优质射孔液；水力压裂优化压裂设计，严格压裂施工。总之，气层保护技术是一个系统工程，任何一个环节的问题，都将对气层产生伤害．因此需加强气层保护研究，做到在钻开气层到投产的每道工序都采取积极有效的气层保护措施。