The zinc-rich corner of the Zn-Fe-Ni-Si quaternary system at 450 °C

Following up on recent studies of the Zn-rich corners of the Zn-Fe-Ni and Zn-Fe-Si ternary systems, a 450 °C isothermal section of the Zn-Fe-Ni-Si quaternary phase diagram with the Zn composition being fixed at 93 at.% was determined experimentally using optical microscopy, scanning electron microscopy (SEM) coupled with energy dispersive x-ray spectroscopy (EDS), and x-ray diffractometry (XRD). FeSi was found to be in equilibrium with almost all phases in the section, including the T, ζ, Ni-δ, NiSi₂, and FeSi₂ phases, as well as the liquid phase (L). Silicon solubilities in the T, ζ, and Ni-δ phases were rather limited. However, the solubilities of Fe and Zn in the NiSi₂ phase, at 4.5 at.% and 7.2 at.%, respectively, were appreciable. The existence of the (L+NiSi₂+Ni-δ) three-phase equilibrium state apparently prevents other Ni-Si compounds from entering equilibrium with the liquid at 450 °C. No true quaternary compound was found in the study.     

利用反射纵波评价裂缝倾角的模拟实验研究

声波全波列测井中的反射纵波可以用来评价高角度裂缝和对井周附近地质结构进行成像。目前的研究主要侧重于直接从波形资料处理出发计算裂缝的位置和倾角 ,其可靠性和准确性无从评价和校验。文中采用模拟实验的方法记录了倾角为 6 0°～80°范围内的 8种倾角裂缝的反射脉冲纵波波形 ,自行推导了反演裂缝倾角的公式 ,结合波场分离技术对实验测量波形数据进行了处理 ,计算出的裂缝倾角与实际值具有良好的一致性。本文结果表明 ,利用至少 2个深度点的纵波反射波波形资料就可以准确地反演裂缝的倾角     

Recovery of fluorocarbons in Japan as a measure for abating global warming

The objective of this study is to evaluate the potential for recovering fluorocarbons as measures for the abatement of global warming. In this study, we focused on the three different kinds of fluorocarbons: CFCs, HCFCs and HFCs, and targeted refrigerant use because of the availability of relevant data. We first estimated future fluorocarbon emissions from the targeted appliances; we next compared those emissions in the units of CO₂ equivalent to the level of CO₂ emissions in 1990 from a quantitative point of view. As the result of this study, it was found that fluorocarbon emissions in 1999 and 2010 would be equal to approximately 7 and 3% of the level of CO₂ emissions in 1990 respectively. Moreover, if we implement a 100% recovery rate in every recovery route, we can reduce a large amount of emissions which correspond to approximately 2–5% of the level of CO₂ emissions in 1990, even if we take into account the energy-related CO₂ emissions by the transportation and decomposition of fluorocarbons.     

浅谈会计信息失真的成因及对策

阐述了会计信息失真的表现形式及其危害性，从会计自身、内控制度、外部审计、道德观念、执法等方面分析了会计信息失真的原因，并从完善法规制度、实行会计委派制、健全会计监督体系、加强立法和执法力度、更新观念、提高素质等方面提出了治理会计信息失真的办法，从根本上杜绝会计信息失真的现象。     

石油测井仪器可靠性指标探讨

在分析常用可靠性指标及其应用现状的基础上，根据可靠性理论及石油测井仪器的特点。提出了石油测井仪器的可靠性模型。在探讨常用可靠性指标对石油测井仪器适用性的同时，提出将平衡稳定工作时间NWTURE和免维修测井井次NOLWNM作为石油测井仪器可靠性指标的思想；探讨了获取可靠性指标的途径。给出了推荐使用的石油测井仪器可靠性指标。     

纳米α-FeOOH颗粒的形态和结构

以硫酸法钛白的副产物绿矾为原料，采用滴加法制备纳米铁黄（α－FeOOH）颗粒。研究了反应体系的pH值、反应温度、通氧速率、搅拌速率和添加剂等对铁黄颗粒形态结构的影响，采用XRD、TEM等分析手段对颗粒进行表征。结果表明，调节体系pH值能控制铁黄晶型结构和色相；改变通氧速率、搅拌速率、添加剂种类以及反应温度等可以调节纳米α－FeOOH的大小和分散性。     

可拓检测的方案生成

以可拓学理论为基础，论述了可拓检测的有关定义和概念，提出了可拓检测的方案生成方法及过程，同时探讨了检测方法的优化和评价方法。     

Adaptive cell division for ray tracing

In ray tracing the two most commonly used data structures are the octree and uniform cell division. The octree structure allows efficient adaptive subdivision of space, while taking care of the spatial coherence of the objects in it; however, the tree structure locating the next node in the path of a ray is complex and time consuming. The cell structure, on the other hand, can be stored in a three-dimensional array, and each cell can be efficiently accessed by specifying three indices. However, such a uniform cell division does not take care of object coherence. The proposed data structure combines the positive features of the above data structures while minimising their disadvantages. The entire object space is implicitly assumed to be a three-dimensional grid of cells. Initially, the entire object space is a single voxel which later undergoes “adaptive cell division.” But, unlike in the octree structure, where each voxel is divided exactly at the middle of each dimension, in adaptive cell division, each voxel is divided at the nearest cell boundary. The result is that each voxel contains an integral number of cells along each axis. Corresponding to the implicit cell division we maintain a three-dimensional array, with each array element containing the voxel number which is used to index into the voxel array. The voxel array is used to store information about the structure of each voxel, in particular, the objects in each voxel. While a ray moves from one voxel to another we always keep track of the cell through which the ray is currently passing. Since only arrays are involved in accessing the next voxel in the path of the ray, the operation is very efficient.     

Finite-element grid improvement by minimization of stiffness matrix trace

A new and simple method of finite-element grid improvement is presented. The objective is to improve the accuracy of the analysis. The procedure is based on a minimization of the trace of the stiffness matrix. For a broad class of problems this minimization is seen to be equivalent to minimizing the potential energy. The method is illustrated with the classical tapered bar problem examined earlier by Prager and Masur. Identical results are obtained.