沉淀铁催化剂上F-T合成反应的研究

制备了物相组成为 Quartz- Si O2 ,Hermatite- Fe2 O3 和 Fe2 O3 - Iron Oxide的沉淀铁催化剂 ,研究了该催化剂作用上固定床积分反应器中费托合成反应特性 .发现 2 .6MPa,80 0 h-1,H2 /CO=2 /3,2 60℃～ 2 90℃时 ,随着温度的升高 ,CO和 H2 的转化率增大 ,CO2 选择性减小 ;40 0 h-1,65 0 h-1,80 0 h-1低空速和 2 4 0 0 h-1,32 0 0 h-1,40 0 0 h-1,640 0 h-1高空速时 ,随着空速的升高 ,H2转化率、CO转化率选择性下降 ,CO2 的选择性升高 ;2 80℃ ,2 .6MPa,H2 /CO进料比 2 /3,1 /1 ,2 /1时 ,随着 H2 /CO进料比的增加 ,CO转化率 ,H2 /CO利用比和 CH4选择性都增加 ,H2 转化率和 CO2选择性减小 .     

Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.     

An interval programming approach for the bilevel linear programming problem under fuzzy random environments

In this paper, we address a class of bilevel linear programming problems with fuzzy random variable coefficients in objective functions. To deal with such problems, we apply an interval programming approach based on the $\alpha $ -level set to construct a pair of bilevel mathematical programming models called the best and worst optimal models. Through expectation optimization model, the best and worst optimal problems are transformed into the deterministic problems. By means of the Kth best algorithm, we obtain the best and worst optimal solutions as well as the corresponding range of the objective function values. In this way, more information can be provided to the decision makers under fuzzy random circumstances. Finally, experiments on two examples are carried out, and the comparisons with two existing approaches are made. The results indicate the proposed approaches can get not only the best optimal solution (ideal solution) but also the worst optimal solution, and is more reasonable than the existing approaches which can only get a single solution (ideal solution).     

The topological basis realization and the corresponding Heisenberg model of spin-1 chain

In this paper, it is shown that the Heisenberg model of spin-1 chain can be constructed from the Birman–Wenzl algebra generator while we have got that the Heisenberg model of spin- $\frac{1}{2}$ chain can be constructed from the Temperley–Lieb algebra generator in our previous work (Sun et al. in EPL 94:50001, 2011). Here, we investigate the topological space, we find that the number of topological basis states raise from the previous two to three, and they are also the three eigenstates of a closed four-qubit Heisenberg model of spin-1 chain. Specifically, all the topological basis states are also the spin single states and one of them is the energy single state of the system. It is worth noting that all conclusions we get in this paper are consistent with our previous work (Sun et al. in EPL 94:50001, 2011). These just indicate that the topological basis states have particular properties in the system.     

DMTO – a method for Discrete Material and Thickness Optimization of laminated composite structures

This paper presents a gradient based topology optimization method for Discrete Material and Thickness Optimization of laminated composite structures, labelled the DMTO method. The capabilities of the proposed method are demonstrated on mass minimization, subject to constraints on the structural criteria; buckling load factors, eigenfrequencies, and limited displacements. Furthermore, common design guidelines or rules, referred to as manufacturing constraints, are included explicitly in the optimization problem as series of linear inequalities. The material selection and thickness variation are optimized simultaneously through interpolation functions with penalization. Numerical results for several parameterizations of a finite element model of a generic main spar from a wind turbine blade are presented. The different parameterizations represent different levels of complexity with respect to manufacturability. The results will thus give insight into the relation between potential weight saving and design complexity. The results show that the DMTO method is capable of solving the problems robustly with only few intermediate valued design variables.     

捣固炼焦在中国焦化工业发展中的前景与展望

介绍了我国炼焦煤源的现状、捣固炼焦的理论依据,并将捣固炼焦技术与常规炼焦方法进行了比较,指出捣固炼焦应向大型化方向发展,并提高捣固和装煤的自动化水平,发展捣固炼焦可促进我国焦化工业的可持续发展。     

认知无线网络动态频谱感知决策安全协议框架研究

对认知网络频谱感知安全研究现状进行了分析, 提出了一个频谱感知决策安全协议框架。对认知无线网络模型中相关组件、符号进行了定义, 并对其结构和安全性进行了详细描述。通过与相关方案比较, 结果表明该协议框架能够用来抵御频谱感知所面临的潜在威胁, 使之进行正确的频谱决策。     

Fe~(2+)注人Al_2O_3陶瓷及其退火改善材料表面电学性能的研究

对透明Al_2O_3陶瓷进行了Fe元素的离子注入。用“Van der Pauw”方法测定注入层的电阻率,并结合Hall效应测量,确定样品载流子浓度和迁移率。 本文主要阐述未经退火和退火的Fe~(2+)注入Al_2O_3陶瓷表面电性能,并应用Rutherford背散射技术等方法进行分析比较,试图得到有关晶格损伤及恢复、注入离子的纵向浓度分布,缺陷等信息。最后,简要地叙述了注入层的导电机制。