Extraction of lipids from cherry seed oil using supercritical carbon dioxide

 Cherry seeds (Prunus avium L.) were extracted with compressed carbon dioxide at 313 K and 333 K in the pressure range 18–22 MPa. The influence of superficial velocity was also analysed using values of 0.02, 0.06 and 0.08 cm/s. The extraction yield was increased by a reduction in particle size. The physical and chemical characteristics of the oil were determined. The results, in terms of free fatty acids and sterol compositions, were compared with those obtained when hexane was used as solvent. Other physical and chemical characteristics were also compared with refined hexane-extracted oil. Received: 29 February 2000 / Revised version: 19 April 2999     

Numerical simulation of plasticity induced crack closure: Identification and discussion of parameters

Numerical studies play a major role in the understanding and prediction of plasticity induced crack closure (PICC). However, the available numerical models can be considered simplifications of reality as they consider discrete crack propagations, relatively high fatigue crack growth rates (FCGR), sharp cracks, and propagation occurring at well-defined loads. Besides, there are a great number of numerical and physical parameters affecting the predictions of PICC. The aim of this paper is to discuss the numerical study of PICC. The numerical parameters affecting the accuracy of the numerical simulations, and the dependent parameters used to characterise the plastic wake and the closure level, are identified. The influence of the radial size of crack front elements and crack propagation is analysed. An extrapolation model is proposed, with excellent results. An intrinsic uncertainty is associated with the number of load cycles between crack increments and the definition of crack closure level. Finally, the effect of the stress ratio (R) on crack closure level is analysed.     

Preconceptional Immunization Can Modulate Offspring Intrathymic IL-17-Producing γδT Cells with Epigenetic Implications Mediated by microRNAs

The mechanisms through which maternal immunization can modulate offspring thymic maturation of lymphocytes are not fully understood. Here, we aimed to evaluate whether maternal OVA-immunization can inhibit the maturation of IL-17-producing γδT cells in offspring thymus, and if this mechanism has epigenetic implications mediated by microRNAs (miRNAs) expression. Wild-type (WT) C57BL/6 females were immunized with OVA in Alum or Alum alone and were mated with normal WT males. Evaluating their offspring thymus at 3 or 20 days old (d.o.), we observed that maternal OVA immunization could inhibit the thymic frequency of offspring CD27- and IL-17⁺ γδT cells at the neonatal and until 20 days old. Furthermore, we evaluated the expression of function-related γ and δ variable γδTCR chains (Vγ1, Vγ2, Vγ3, Vδ4, and Vδ6.3), observing that maternal OVA-immunization inhibits Vγ2 chains expression. The small RNAs (sRNAs), particularly miRNAs, and messenger RNAs (mRNA) expression profiles by pools of thymus tissue samples (from 9 to 11 mice) from offspring OVA-immunized or Alum-immunized mothers were analyzed via Illumina sequencing platform and bioinformatics approaches. Using a fold change >4, our results showed that seven miRNAs (mmu-miR-126a-3p, 101a-3p, 744-3p,142-5p, 15a-5p, 532-5p, and 98-5p) were differentially expressed between both groups. Ten target genes were predicted to interact with the seven selected miRNAs. There were no enriched categories of gene ontology functional annotation and pathway enrichment analysis for the target genes. Interestingly, four of the identified miRNAs (mmu-miR-15a, mmu-miR-101 mmu-miR-126, and mmu-miR-142) are related to IL-17 production. Our data is of significance because we demonstrate that maternal immunization can modulate offspring thymic maturation of IL-17-producing γδT cells possibly by an epigenetic mechanism mediated by miRNAs.     

Histologic effect of diode laser sclerostomy in human cadaver eyes

BACKGROUND AND OBJECTIVES: To study tissue effects and thresholds of efficacy in producing a full-thickness scleral fistula in human eyes obtained from cadavers. The effect of laser sclerostomies created with indocyanine green (ICG) was also evaluated. MATERIALS AND METHODS: Ab externo laser sclerostomies were produced in 12 fresh human eyes obtained from cadavers using a 200-micron diameter fiber optic connected to a diode laser system. Power settings were 500, 750, 1000, 1250, 1500, and 2000 mW with a constant duration of 100 and 200 ms. The same diode laser settings were repeated in the tissues injected with ICG. RESULTS: The laser sclerostomies were associated with heat coagulation damage adjacent to the burn margins, with disruption of stromal collagen. Tissue damage was greater at higher power and longer duration. Scleral injection of ICG prior to laser sclerostomy did not enhance laser penetration. CONCLUSION: The diode laser can create a sclerostomy in human sclera with an optimum level of 1500 mW and 100 ms. ICG did not significantly enhance the ease of penetration or reduce the association thermal damage to the sclera.     

Cardiac lipoprotein lipase in the spontaneously hypertensive rat

OBJECTIVE: The objectives of the present study were to determine functional (i.e., heparin-releasable) and intracellular (i.e., heparin-non-releasable) cardiac lipoprotein lipase (LPL) activity during the development of hypertension in spontaneously hypertensive (SHR) rats. METHODS: Male WKY and SHR rats were killed before (7-8 weeks of age) and following (15-16 weeks of age) the development of severe hypertension in SHR rats. LPL activity in coronary perfusates was determined by retrogradely perfusing the hearts with heparin (5 U/ml). Cardiac myocytes were also isolated from the two groups of rats by collagenase digestion, and surface-bound and intracellular LPL activity measured. RESULTS: With the development of hypertension in SHR rats, there was a concomitant and progressive reduction in the heparin-releasable coronary endothelial LPL activity. Neither insulin action nor cell-associated enzyme activity could explain this low LPL activity in coronary blood vessels. However, acute vasodilation with nifedipine (a Ca2+ influx blocker) or CGS-21680 (A2-purinergic receptor agonist) increased the peak heparin-releasable LPL activity in hearts isolated from SHR rats. CONCLUSIONS: Our results indicate that hypertension per se may play a significant role in regulating cardiac LPL activity, and hence fatty acid supply to the hypertensive SHR rat heart.     

Space-Charge Distribution across Internal Interfaces in Electroceramics Using Electron Holography: II, Doped Grain Boundaries

Transmission high-energy electron holography has been utilized to quantitatively determine the magnitude, sign, and spatial extent of the electrical potential, electric field, as well as the charge and stress field distributions across electrically active grain boundaries (GBs) in polycrystalline SrTiO₃. The polycrystalline compacts utilized were bulk-doped with Fe and GB-doped with Mn, which is diffused into them under a nonequilibrium situation. The holography results reveal negatively charged GBs with associated positive space-charge, indicating that Mn resides as an acceptor dopant on the Ti site, creating a negative bound charge at the GBs. A large heterogeneity in the electrical activity is observed among various GBs; while some GBs show high Schottky barriers, others have very small barriers. The distribution of the bound charge and the compensating free charge, which together contribute to the formation of GB charge and space-charge, has been estimated. The bound charge experiences an outward stress field due to the force of the electric field on either side of the GB. The height of the double Schottky barrier, the Debye length, as well as the spatial extent of the bound charge and space-charge at the GB are derived from these holography results. The results also provide a quantitative measure of the defect densities as well as of the contribution of the electrostatic stress field to the lattice relaxation at the GBs and yield a point defect model for the GB.     

Concretes and mortars recycled with water treatment sludge and construction and demolition rubble

There are about 7500 water treatment plants in Brazil. The wastes these plants generate in their decantation tanks and filters are discharged directly into the same brooks and rivers that supply water for treatment. Another serious environmental problem is the unregulated disposal of construction and demolition rubble, which increases the expenditure of public resources by degrading the urban environment and contributing to aggravate flooding and the proliferation of vectors harmful to public health. In this study, an evaluation was made of the possibility of recycling water treatment sludge in construction and demolition waste recycling plants. The axial compressive strength and water absorption of concretes and mortars produced with the exclusive and joint addition of these two types of waste was also determined. The ecoefficiency of this recycling was evaluated by determining the concentration of aluminum in the leached extract resulting from the solubilization of the recycled products. The production of concretes and mortars with the joint addition of water treatment sludge and recycled concrete rubble aggregates proved to be a viable recycling alternative from the standpoint of axial compression strength, modulus of elasticity, water absorption and tensile strength by the Brazilian test method.     

Obesity among offspring of women with type 1 diabetes

OBJECTIVE: To determine subsequent growth and body composition of children born to women with type 1 diabetes compared with controls. DESIGN: Prospective cohort study. SETTING: Follow-up of offspring born to women with type 1 diabetes and controls from an earlier study of diabetes and lactation. SUBJECTS: Seventeen nondiabetic offspring of women with type 1 diabetes and 18 offspring of control women (age range 5.9 to 9.0 years). OUTCOME MEASURES: Anthropometric measures at follow-up included height, weight, triceps and subscapular skinfold thickness. Information on usual nutrient intakes and physical activity patterns was elicited through questionnaires. Body composition was determined from skinfold thickness measures and bioelectrical impedance analysis. A child was identified as obese if he or she met at least 2 of the following 4 criteria for obesity: (1) weight-for-height equal to or greater than 120% of the National Center for Health Statistics (NCHS) reference median plus triceps skinfold greater than the 85th percentile; (2) body mass index (BMI) greater than the 95th percentile for age and sex; (3) percent body fat (from impedance measures) equal to or greater than 25 for boys and 30 for girls; or (4) percent body fat (from sum of skinfold measures) equal to or greater than 25 for boys and 30 for girls. RESULTS: There were 7 obese children in the type 1 diabetes group and none in the control group (p = 0.007). Obese children did not differ from nonobese children in birth weight, body fat patterning, nutrient intake, physical activity patterns, maternal pregravid weight or blood glucose control during the last trimester of pregnancy. Mothers of obese children, however, had fewer years of education and gained more weight during pregnancy compared with mothers of nonobese children in the type 1 diabetes group (p < 0.05). CONCLUSION: Obesity during childhood is a significant problem among nondiabetic children of women with type 1 diabetes. The association of childhood obesity with lower maternal education and excessive pregnancy weight gain warrants further investigation.     

Aging and immunoglobulin isotype patterns in oral tolerance

The haptic perceptual sybsystem of dynamic touch is prominent in manipulating and transporting objects, providing a nonvisible awareness of their linear dimensions. The hypothesis that perceptions of object width and height by dynamic touch are different functions of the inertia tensor is addressed. In two experiments heights and widths of nonvisible wielded objects were judged separately. Experiment 1 used solid rectangular parallelepipeds of different sizes; Experiment 2 used objects of identical mass and linear dimensions but nonidentical inertia ellipsoids. Width and height perceptions of comparable reliability and accuracy were found to vary as distinct functions of the objects' inertial eigenvalues. Discussion focused on the notion of tangible shape and on the selectivity of attention within dynamic touch.     

Corrosion effects of glass on YSZ electrolytes

This work reports on the microstructure and electrical properties of different yttria stabilized zirconia (YSZ) based cells using: (i) intimate mixtures of YSZ and a commercial soda-lime glass (up to 20 wt%), sintered at different temperatures; (ii) YSZ disks covered with a layer of glass on one side and fired in a clean laboratory furnace for two hours at different temperatures (1250–1350 °C); (iii) YSZ pellets exposed to the exhaust gases of one (industrial) glass melting furnace, at temperatures around 1300 °C. Microstructural observations and impedance spectroscopy measurements were used to demonstrate the potential of the latter technique in monitoring the electrolyte corrosion. The high-and intermediate-frequency impedance arcs showed a significant and coherent dependence on the progress of corrosion, due to the formation of glass–ceramic composites with large glass/ceramic interfaces. Similar results were obtained with laboratory scale and industrial experiments. EDS analysis showed an higher concentration of Y₂O₃ in the intergrain region and a corresponding concentration decrease in the electrolyte grains.