Tumour-localising and -photosensitising properties of a novel zinc(II) octadecylphthalocyanine

1,4,8,11,15,18,22,25-Octadecylphthalocyaninato zinc(II), ZnODPc, incorporated into a Cremophor emulsion, was assayed for its pharmacokinetic and phototherapeutic properties in Balb/c mice bearing an intramuscularly transplanted MS-2 fibrosarcoma. The phthalocyanine was injected intravenously (i.v.) in three doses, i.e. 1.46, 0.73 and 0.37 mumol kg-1 body weight. In all cases, the octadecyl-substituted phthalocyanine showed an unusually high affinity for serum low-density lipoproteins (LDLs) and a high efficiency and selectivity of tumour targeting: the maximum accumulation in the tumour occurred at 24 h after injection, whereas no detectable amount of phthalocyanine was recovered from the muscle, i.e. the peritumoral tissue, between 1 h and 1 week after injection. At the same time, low amounts of phthalocyanine were recovered from skin and then only at short times after injection, with skin photosensitivity rapidly disappearing and the phthalocyanine present in the serum only. Tumour photosensitisation studies were carried out at 24 h after administration of 1.46 mumol kg-1 ZnODPc and showed that this phthalocyanine has a very high phototherapeutic efficiency; this is probably a consequence of the multiple mechanisms by which the phthalocyanine induces tumour damage, involving both direct modification of malignant cells and impairment of blood flow, as well as the alteration of a variety of subcellular components, such as mitochondria, the rough endoplasmic reticulum, the perinuclear membrane and, occasionally, cell nuclei. Tumour necrosis appears to be the consequence of both random cell death and apoptosis.     

Tailoring fiber grating sensors for assessment of highly refractive fuels

Three approaches that allow the tailoring of long period gratings based refractometric sensors for concentration measurement in fuel blends are employed to assess the fuel quality in biodiesel and biodiesel-petrodiesel blend. To allow the analysis of fuel samples with refractive index higher than fiber cladding one, the samples refractive indices were changed by thermo-optic effect and by dilution in a standard substance with low refractive index. The obtained results show the sensor can detect oil concentration in biodiesel samples with resolution as better as 0.07% and biodiesel concentration in biodiesel-petrodiesel samples with average resolution of 0.09%.     

Comparison of drinking water treatment process streams for optimal bacteriological water quality

Four pilot-scale treatment process streams (Stream 1 - Conventional treatment (coagulation/flocculation/dual media filtration); Stream 2 - Magnetic ion exchange (MIEX)/Conventional treatment; Stream 3 - MIEX/Conventional treatment/granular activated carbon (GAC) filtration; Stream 4 - Microfiltration/nanofiltration) were commissioned to compare their effectiveness in producing high quality potable water prior to disinfection. Despite receiving highly variable source water quality throughout the investigation, each stream consistently reduced colour and turbidity to below Australian Drinking Water Guideline levels, with the exception of Stream 1 which was difficult to manage due to the reactive nature of coagulation control. Of particular interest was the bacteriological quality of the treated waters where flow cytometry was shown to be the superior monitoring tool in comparison to the traditional heterotrophic plate count method. Based on removal of total and active bacteria, the treatment process streams were ranked in the order: Stream 4 (average log removal of 2.7) > Stream 2 (average log removal of 2.3) > Stream 3 (average log removal of 1.5) > Stream 1 (average log removal of 1.0). The lower removals in Stream 3 were attributed to bacteria detaching from the GAC filter. Bacterial community analysis revealed that the treatments affected the bacteria present, with the communities in streams incorporating conventional treatment clustering with each other, while the community composition of Stream 4 was very different to those of Streams 1, 2 and 3. MIEX treatment was shown to enhance removal of bacteria due to more efficient flocculation which was validated through the novel application of the photometric dispersion analyser.     

Reduced progesterone concentration during growth of the first follicular wave affects embryo quality but has no effect on embryo survival post transfer in lactating dairy cows

Fertility of lactating dairy cows is associated with reduced progesterone (P(4)) concentration compared with nonlactating animals. The objective of the current study was to determine whether P(4) during growth of the first follicular wave (FFW) affects embryo quality. Lactating Holstein cows at 33±3 days post partum were allocated to one of three treatments. Cows in the FFW and FFW with P(4) (FFWP) treatments started the superstimulation protocol on day 1 of the estrous cycle and second follicular wave (SFW) cows started the superstimulation protocol on estrous cycle day 7. Cows were superstimulated with 400 mg of NIH-FSH-P1 (FSH) given twice daily for 5 days, two prostaglandin F(2α) (PGF(2α)) injections given with the ninth and tenth injections of FSH, GNRH given 48 h after the first PGF(2α) injection, and timed insemination 12 and 24 h after the GNRH injection. Cows in the FFWP treatment received two intravaginal P(4) inserts during the superstimulation. Embryos were recovered 6.5 days after artificial insemination and excellent/good and fair embryos were frozen and transferred. Blood was sampled daily from estrous cycle day 0 until insemination from donor cows. During the superstimulation protocol, P(4) was (P<0.01) greatest for SFW cows followed by FFWP and FFW cows respectively. The percentage of embryos-oocytes from SFW and FFWP cows classified as excellent/good and fair embryos was (P=0.02) greater than those of FFW cows. Pregnancy per embryo transfer was not (P≥0.73) affected by embryo donor treatment. Reduced embryo quality of cows induced to ovulate the follicles from the first follicular wave is a consequence of reduced P(4) during follicle growth.     

Multifunctional cotton fabrics

Electrically conductive fabrics were produced by deposition of a thin film of doped polypyrrole on the surface of cotton fibres. In situ oxidative chemical polymerisation were carried out in aqueous solutions of pyrrole, oxidant and doping agents, at room temperature. Polypyrrole-coated fibres were characterized by Light Microscopy, SEM, EDX, FTIR and TGA. Moreover, fabric samples were also evaluated for moisture regain, electrical resistivity, heat generation and antibacterial activity. PPy alters the combustion process of cellulose fibres that maintain the fibrous shape after heating in air. Moreover, it seems that PPy is really an antibacterial agent, apart from the oxidant or dopant used. The results highlight potential applications as technical textiles with antistatic (low electrical resistance), heat generation, hygroscopy, antibacterial and high temperature resistance properties.     

Multi-wavelength spectroscopic and chromatography study on the photocatalytic oxidation of natural organic matter

The effect of TiO₂ photocatalytic oxidation on the natural organic matter (NOM) properties of two Australian surface waters were quantified using UV-vis spectroscopy, high performance size exclusion chromatography (HPSEC) with a multi-wavelength UV detector, liquid chromatography with organic carbon detector (LC-OCD), and trihalomethane formation potential (THMFP) analyses. Both the UV absorbance at wavelengths greater than 250 nm and dissolved organic carbon (DOC) content decreased significantly with treatment, although complete mineralization of NOM could not be achieved. Multi-wavelength UV detection of HPSEC analysis was shown to be useful to display further changes to NOM composition and molecular weight profiles because the organic molecules was transformed into compounds that absorb weakly at the typical detection wavelength of 250-260 nm. The multi-wavelength HPSEC results also revealed that photocatalytic oxidation yields by-products with a low aromaticity and low molecular weight. The LC-OCD chromatograms indicated that low molecular acids and neutral compounds remained after photocatalytic oxidation. Those groups of compounds did not seem to contribute significantly to the formation of trihalomethanes.     

Influence of surrounding media refractive index on the thermal and strain sensitivities of long-period gratings

A detailed study of the thermal and strain sensitivities of a long-period grating when the device is immersed in different external media is presented. The range of refractive indices analyzed are within 1.000 to 1.447, corresponding to samples of air, water, ethanol, naphtha, thinner, turpentine, and kerosene. Within the same range of refractive indices, the strain sensitivity is between (-0.24 +/- 0.03) and (-0.94 +/- 0.11) pm/microepsilon. For the grating immersed in these fluids, the refractive index sensitivity ranges from -3 to -1035.6 nm per refractive index units. The coupling thermo-optic coefficients and the strain-optic coefficients are also measured, resulting in the range from (2.45 +/- 0.04)x10(-5) to (15.89 +/- 0.82)x10(-5) deg C(-1) and (-1.15 +/- 0.04) to (-1.61 +/- 0.04) microepsilon(-1), respectively. A noticeable nonlinear behavior of the thermal sensitivity is found for external media with refractive indices higher than 1.430.     

Top-down characterization of nucleic acids modified by structural probes using high-resolution tandem mass spectrometry and automated data interpretation

A top-down approach based on sustained off-resonance irradiation collision-induced dissociation (SORI-CID) has been implemented on an electrospray ionization (ESI) Fourier transform mass spectrometer (FTMS) to characterize nucleic acid substrates modified by structural probes. Solvent accessibility reagents, such as dimethyl sulfate (DMS), 1-cyclohexyl-3-(2-morpholinoethyl)carbodiimide metho-p-toluenesulfonate (CMCT), and beta-ethoxy-alpha-ketobutyraldehyde (kethoxal, KT) are widely employed to reveal the position of single- vs double-stranded regions and obtain the footprint of bound proteins onto nucleic acids structures. Established methods require end-labeling of the nucleic acid constructs, probe-specific chemistry to produce strand cleavage at the modified nucleotides, and analysis by polyacrylamide gel electrophoresis to determine the position of the susceptible sites. However, these labor-intensive procedures can be avoided when mass spectrometry is used to identify the probe-induced modifications from their characteristic mass signatures. In particular, ESI-FTMS can be directly employed to monitor the conditions of probe application to avoid excessive alkylation, which could induce unwanted distortion or defolding of the substrate of interest. The sequence position of the covalent modifications can be subsequently obtained from classic tandem techniques, which allow for the analysis of individual target adducts present in complex reaction mixtures with no need for separation techniques. Selection and activation by SORI-CID has been employed to reveal the position of adducts in nucleic acid substrates in excess of 6 kDa. The stability of the different covalent modifications under SORI-CID conditions was investigated. Multiple stages of isolation and activation were employed in MS(n)() experiments to obtain the desired sequence information whenever the adduct stability was not particularly favorable, and SORI-CID induced the facile loss of the modified base. A new program called MS2Links was developed for the automated reduction and interpretation of fragmentation data obtained from modified nucleic acids. Based on an algorithm that searches for plausible isotopic patterns, the data reduction module is capable of discriminating legitimate signals from noise spikes of comparable intensity. The fragment identification module calculates the monoisotopic mass of ion products expected from a certain sequence and user-defined covalent modifications, which are finally matched with the signals selected by the data reduction program. Considering that MS2Links can generate similar fragment libraries for peptides and their covalent conjugates with other peptides or nucleic acids, this program provides an integrated platform for the structural investigation of protein-nucleic acid complexes based on cross-linking strategies and top-down ESI-FTMS.     

Preparation and physico-chemical characterisation of microporous polysaccharidic hydrogels

A new technique to obtain microporous hydrogels was realised. It permits us to obtain a microporous structure directly on the already cross-linked hydrogel. It consists in stratifying the already cross-linked hydrogel on to a filter with known porosity and forcing the CO2 bubbles, derived from the addition of HCl to a porogen salt (NaHCO3), to cross through the filter first and then the matrix. By changing the porosity of the filter, it was possible to modulate the porous morphology of the hydrogels. The polysaccharides selected were hyaluronane, alginate, and carboxymethylcellulose. The influence of the porous morphology on the physico-chemical properties of the gel has been evaluated by FT-IR, FRAP, calorimetric, water uptake, and rheological analysis.