低能重离子及其碰撞产生的级联原子在生物材料中的直接作用范围

用Ｍｏｎｔｅ Ｃａｒｌｏ法模拟计算了３０ｋｅＶ和２００ｋｅＶ的Ｎ＾＋与１１０ｋｅＶ的Ｆｅ＾＋在模拟细胞中的射程分布和径迹结构，并将１１０ｋｅＶＦｅ＾＋模拟计算的结果与ＲＳＢ测量的结果相比较，发现计算与测量的结果吻合较好，离子的作用范围小于１μｍ。计算和实验的结果都说明能量相当低的重离子不大可能直接作用引起麦胚深层生物效应。     

光纤式机器人触觉传感器静态特性的实验研究

介绍了一种光纤式机器人触觉传感器，分析了这种传感器的静态特性，并通过理论分析和实验研究提出了一种消除干扰的方法。实验结果证明，传感器的最大绝对误差为０．０５３ｋｇ，相对误差为０．６２％。     

二烷基硫代磷酸铵的捕收性能

本文研究了二烷基硫代磷酸铵（ＲＯ）２ＰＳＯＮＨ４（Ｒ＝乙基、丁基、己基、烯丙烯）系列捕收剂对非硫化矿孔雀石、锡石、赤铁矿、白铅矿、方解石和菱锌矿的浮选性能，并就药剂结构与性能关系进行了分析讨论．     

Structure and damping properties of polydimethylsiloxane and polymethacrylate sequential interpenetrating polymer networks

By using the technology of the sequential interpenetrating polymer network, a series of novel damping materials based on a polydimethylsiloxane (PDMS)/polyacrylate (PAC) matrix with polymethacrylate (PMAC) were synthesized. They have a controllable broad transition peak spanning the temperature range of 150–220°C and the medial value of loss factor with maximum of 0.35–0.60. Dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and atomic force microscopy (AFM) were applied to analyze and characterize the transition behavior and the microphase structure of the materials. It was found that the size and height of a transition peak at both the low‐ and the high‐temperature zones change as a function not only of the concentration of PMAC and PDMS but also of the kind of PMAC; simultaneously, the low‐ temperature behavior was also governed by the crystallization of PDMS. The content of the crosslinking agent exerts a significant influence on the configuration of the curves of the transition peaks. AFM shows a characteristic phase morphology of double‐phase continuity containing a transition layer and domain less than 1 μm, indicating that the interwoven multilayer networks are the key to incorporation of the immiscible components and form a broad damping functional region. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 545–551, 2002     

Quantum-mechanical reaction rate constants from centroid molecular dynamics simulations: Barrier crossing in an asymmetrical double-well

Quantum-mechanical reaction rate constants were calculated from centroid molecular dynamics (CMD) simulations, for the case of barrier crossing in an asymmetrical double-well potential bilinearly coupled to a harmonic bath. The calculation is based on a recently proposed formulation of the reaction rate constant in terms of the position—flux correlation function, which can be approximated via CMD in a well-defined manner. The predictions of CMD and various simplified versions of it are compared to exact results, which were obtained via the quasi-adiabatic propagator path integral (QUAPI) method, and/or path integral quantum transition state theory (PI-QTST). The predictions based on CMD are found to be in good agreement with both.     

浅析体系转换法和粘贴碳纤维加固法在桥梁加固中的应用

通过对桥梁加固技术的研究，讨论了体系转换法和粘贴碳纤维布加固法的具体应用。     

Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

气动冲击器研究现状及发展趋势

阐述了气动冲击旋转钻井用气动冲击器国内外近期的研究现状,以及各类冲击器的结构和性能参数,并提出了气动冲击器的发展趋势。     

油气田施工企业如何办理特种设备的安装告知

随着长庆油田的不断发展,作为油气田产能建设施工企业,安装的锅炉压力容器和压力管道的数量逐年上升,对锅炉压力容器和压力管道的安装告知工作也日益成为工作中不可或缺的环节.文章介绍了长庆石油勘探局建设工程总公司近年来办理特种设备安装、改造、维修告知的做法和遇到的问题,如设备安装的监检费、安装告知书的内容和办理手续等.     

井下气液分离及回注技术研究现状分析

气井产水量的不断增加对天然气生产构成严重威胁，其影响越来越受到人们的关注和重视。使用井下气液分离及回注技术，可以降低举升和处理费用，增加生产寿命，提高采收率，减少环境污染，简化地面分离设备，提高投资效益。针对井下分离及回注技术研究现状进行了分析，给出了并下气液分离及回注形式、适用条件和技术设计、应用方面的结论。