喷动床反应模型的研究进展

喷动床是一种可实现热量重复循环的高效反应器 .介绍了目前喷动床研究中出现的各种反应模型 ,从等温和非等温两个方面讨论了一维轴向、流管、半分割和流动反应耦合等各类模型的基本思想和理论及各自的特点 ,并提出了进一步发展的方向 .     

国内外非铬航空涂层的研究进展

综合分析了国内外非铬航空涂层的发展现状;对硼硫酸阳极氧化膜、非铬底漆的防腐性能进行了研究;对硼硫酸阳极氧化对铝合金疲劳性能的影响进行了测试。试验结果表明:非铬涂层需配以含铬的转化涂层才能够满足防腐性能的要求。硼硫酸阳极氧化对铝合金疲劳性的影响与铬酸阳极氧化相当。     

Molecular weight distribution of polyethylene catalyzed by Ziegler–Natta catalyst supported on MgCl2 doped with AlCl3

Ti‐based Ziegler–Natta catalysts supported on MgCl₂ doped with AlCl₃ were prepared by the reaction of MgCl₂/AlCl₃–ethanol adduct with TiCl₄. No AlCl₃ crystallites were found in the AlCl₃‐doped catalysts by WAXD analysis, suggesting that AlCl₃/MgCl₂ solid solution was formed. The effect of doping on the catalyst performance in ethylene polymerization was investigated. The results showed that the catalysts based on AlCl₃‐doped MgCl₂ support exhibited a slightly higher activity than did the MgCl₂‐supported catalyst and the molecular weight distribution (MWD) of polyethylene (PE) markedly increased (from 10.8 to 47.9) with the increase of AlCl₃ content in catalysts. The changes in catalyst's active center distribution were studied based on nonlinear fitting of the polymer GPC curves by multiple Flory functions. It was found that increase of types of active centers by introducing AlCl₃ into the support should be responsible for the broadening of MWD of PE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1768–1772, 2006     

茂名乙烯装置长周期运转技术探索

中国石化茂名分公司化工事业部乙烯装置1999年2月完成380 kt/a扩能改造后,长周期运转达79个月。多年来,茂名乙烯装置在长周期运转方面进行了很多技术探索并采取了一系列措施,取得了较好的成绩。     

一步法120 dtex/112f涤纶混纤丝工艺探讨

从两种不同组分的组件压力、侧吹风风速、纺丝速度、牵伸比、热辊温度、网络压力等方面探讨了一步法纺制POY/FDY涤纶混纤丝(ITY)的生产工艺。实践证明:当POY/FDY的组件压力分别为12 MPa和13 MPa,侧吹风风速为0.65～0.75 m/s,卷绕速度为3 800～4 000 m/min,第一热辊温度为94～97℃,第二热辊温度为133～136℃,牵伸比为2.7～2.9,中间网络压力为0.50～0.55 MPa,主网络压力为0.55～0.60 MPa时,满足工业化生产和后续纺织产品的要求。     

合成堇青石陶瓷材料的研究进展

概述了堇青石材料的组成、结构、性能特点及应用领域。阐述了堇青石的合成方法以及基本原理，重点介绍了天然矿物原料合成堇青石的研究进展。     

Determination and correlation solubility of 4-nitroimidazole in twelve pure solvents from 278.15 K to 323.15 K

In this paper, the solubility of 4-nitroimidazole in twelve pure solvents (toluene, benzene, 1,4-dioxane, acetonitrile, ethyl acetate, acetone, GBL, ethanol, methanol, n-butanol, DMF and NMP) were determined by using the laser monitoring system from 278.15 K to 323.15 K under 101.1 kPa, which are 0.00018-0.00070, 0.00021-0.00073, 0.00034-0.00092, 0.00038-0.00142, 0.00047-0.00120, 0.00126-0.00303, 0.00225-0.00517, 0.00310-0.00724, 0.00467-0.00982, 0.00453-0.01940, 0.01947-0.04652, and 0.04670-0.07452, respectively. At constant temperature, the mole fraction solubility of 4-nitroimidazole were increased as the following order: toluene < benzene < 1,4-dioxane < (ethyl acetate or acetonitrile) < acetone < GBL < ethanol < (methanol or nbutanol) < DMF < NMP, and the solubility of 4-nitroimidazole in (ethyl acetate, acetonitrile) and (methanol, n-butanol) had an intersection point at 297.55 K and 281.85 K, respectively. The solubility of 4-nitroimidazole could be increased with increasing temperature in twelve pure solvents. The ideal model, modified Apelblat equation, polynomial empirical equation, and λh equation were used to correlate the experimental values. The experimental solubility values were employed to calculate the standard dissolution enthalpy, standard dissolution entropy and Gibbs energy. The dissolution of 4-nitroimidazole could be an endothermic process in twelve pure solvents. The determination and fitting solubility of 4-nitroimidazole have important guiding significance for the purification and crystallization of its preparation process.     

循环式活性污泥法处理炼油污水

研究为在炼油污水的CAST工艺的主反应区中 ,通过恰当控制pH值和DO(污水中溶解氧含量 )值 ,可以使硝化与反硝化反应同步进行 ,在去除COD ,BOD的同时 ,也可提高其脱氮效果 ,从而得出DO的最佳值为 0 .8mg/L ,pH为 7.3～ 7.7之间。     

阳光下TiO2/GAC光催化处理洗涤剂废水的研究

利用太阳光作光源，采用固定在颗粒活性炭中的TiO2(TiO2／GAC)作光催化剂，利用其将活性炭极好的吸附性与TiO2优良的光催化性能结合于一体的特性，设计了对以洗衣粉配置的洗涤剂模拟废水的两种处理方案：同时光照-吸附法和吸附饱和-光照水洗再生法，并在实验基础上对两种方案的一些性能进行了讨论。     

黑方台焦家4号黄土滑坡发育特征及滑动机理

20世纪60年代以来,大量的灌溉系统在黄土地区建设运营,解决了农业的干旱问题,但同时灌溉也诱发了大量的滑坡。其中,2015年1月28日20:00,甘肃省永靖县焦家村发生了一起中等规模的黄土滑坡,滑坡严重影响其下方309国道线和六盘峡水库的安全。采用对裂缝分布、水文地质的调查,结合低空摄影测量、精细工程地质测绘、室内三轴试验等研究方法,对焦家4号滑坡的基本特征进行了分析,对形成滑坡的成灾机理有了初步认识。结果表明:(1)滑坡发生前,后缘裂缝有明显的变形情况;(2)滑坡滑动距离为548.3 m,体积为15.35万m~3,面积为6.6万m~2;(3)饱和黄土应力应变模式表现为强烈的应变软化剪缩型,并具有一定的静态液化特性;(4)滑坡是饱和黄土层静态液化引起的。