Barrier coverage with wireless sensors

When a sensor network is deployed to detect objects penetrating a protected region, it is not necessary to have every point in the deployment region covered by a sensor. It is enough if the penetrating objects are detected at some point in their trajectory. If a sensor network guarantees that every penetrating object will be detected by at least k distinct sensors before it crosses the barrier of wireless sensors, we say the network provides k-barrier coverage. In this paper, we develop theoretical foundations for k-barrier coverage. We propose efficient algorithms using which one can quickly determine, after deploying the sensors, whether the deployment region is k-barrier covered. Next, we establish the optimal deployment pattern to achieve k-barrier coverage when deploying sensors deterministically. Finally, we consider barrier coverage with high probability when sensors are deployed randomly. The major challenge, when dealing with probabilistic barrier coverage, is to derive critical conditions using which one can compute the minimum number of sensors needed to ensure barrier coverage with high probability. Deriving critical conditions for k-barrier coverage is, however, still an open problem. We derive critical conditions for a weaker notion of barrier coverage, called weak k-barrier coverage.     

Designing Nanoscale Logic Circuits Based on Markov Random Fields

As devices and operating voltages are scaled down, future circuits will be plagued by higher soft error rates, reduced noise margins and defective devices. A key challenge for the future is retaining high reliability in the presence of faulty devices and noise. Probabilistic computing offers one possible approach. In this paper we describe our approach for mapping circuits onto CMOS using principles of probabilistic computation. In particular, we demonstrate how Markov random field elements may be built in CMOS and used to design combinational circuits running at ultra low supply voltages. We show that with our new design strategy, circuits can operate in highly noisy conditions and provide superior noise immunity, at reduced power dissipation. If extended to more complex circuits, our approach could lead to a paradigm shift in computing architecture without abandoning the dominant silicon CMOS technology.     

Optimization of MIG Welding Parameters to Control the Angular Distortion in Fe410WA Steel

In the fabrication industry, metal inert gas (MIG) welding is a very important process and Fe410WA is the most commonly used material for the manufacturing of fabricated structures. During the preparation of butt welded joints, angular distortion is a major concern. Angular distortion can be minimized by optimizing the input parameters. In this paper, a study of the optimization of controllable input parameters such as current, voltage and gas flow rate by using the Taguchi method is performed. Butt welding samples were prepared by using three levels and three factors. An orthogonal array of nine trials is considered for the design of the experiment. After measuring the distortion angle, observed readings were verified by using analysis of variance (ANOVA) technique and it was found that the p-values were less than 0.05. Theoretical calculations were performed to optimize the process parameters to achieve the minimum distortion angle. A confirmation test was taken for validation purposes and to confirm the result.     

An Efficient and Scalable Quasi-Aggregate Signature Scheme Based on LFSR Sequences

Aggregate signatures can be a crucial building block for providing scalable authentication of a large number of users in several applications like building efficient certificate chains, authenticating distributed content management systems, and securing path vector routing protocols. Aggregate signatures aim to prevent resources (signature and storage elements, and computation) from growing linearly in the number of signers participating in a network protocol. In this paper, we present an efficient and scalable quasi-aggregate signature scheme, {rm CLFSR}- {rm QA}, based on third-order linear feedback shift register (cubic LFSR) sequences that can be instantiated using both XTR and GH public key cryptosystems. In the proposed {rm CLFSR}-{rm QA} construction, signers sign messages sequentially; however, the verfier need not know the order in which messages were signed. The proposed scheme offers constant length signatures, fast signing, aggregation, and verification operations at each node, and requires the least storage elements (public keys needed to verify the signature), compared to any other aggregate signature scheme. To the best of our knowledge, {rm CLFSR}- {rm QA} is the first aggregate signature scheme to be constructed using LFSR sequences. We believe that the {rm CLFSR}- {rm QA} signature scheme can be catalytic in improving the processing latency as well as reducing space requirements in building secure, large-scale distributed network protocols. We perform extensive theoretical analysis including correctness and security of {rm CLFSR}- {rm QA} and also present a performance (computation and communication costs, storage overhead) comparison of the proposed scheme with well-known traditional constructions.     

Quick and reliable estimation of BOD load of beverage industrial wastewater by developing BOD biosensor

An amperometric biosensor for determination of biochemical oxygen demand in wastewater has been developed to overcome the time consuming monitoring procedures. The performance and stability of the immobilized membrane have been investigated at 37 °C and pH 6.8. Immobilized microbial membranes maintain their stability and activity after intermittent use for 400 cycles when stored at 4 °C in sodium phosphate buffer pH 6.8. The response time of the BOD sensor was only 90 min, being independent of the concentration, and the lower detection limit was 1 mg/l. The obtained BOD values showed correlation with that of the conventional method for BOD determination (BOD5) with a deviation of ±10%. Moreover, the sensor exhibits good repeatability (3.39–4.45%) and reproducibility (1.85–2.25%). Software was added to upgrade this sensor and to make it a promising candidate for online monitoring.     

Integrating Safety Critical Software System in Probabilistic Safety Assessment

In the recent times, computer-based systems are frequently used for protection and control of Nuclear Power Plants (NPPs). In the conventional Probabilistic Safety Assessment (PSA), the contribution from software in these computer-based systems was not given necessary attention. However, from operating experience, it has been found failures in such systems can also result in initiating events that have the potential for leading into Core Damage in the event of unavailability of the respective Engineered Safety Features. The impact of a typical computer-based system on PSA of Indian Nuclear Power Plant is demonstrated.     

Optimisation of Detergent Ingredients for Stain Removal Using Statistical Modelling

Artificially soiled test fabrics are widely used to study the cleaning performance of detergents formulations. In this study, artificial soiled cotton test fabrics were prepared in the laboratory using carbon black as a model soil. Design of experiments was used to optimise the concentration of detergent ingredients for stain removal. A multi‐factorial analysis of variance was used to model the effect of sodium dodecylbenzene sulfonate, nonylphenol ethoxylate, sodium silicate, sodium citrate and sodium carbonate as builders on soil removal. A colourimetric evaluation using the CIELAB system was used to measure soil removal. In general, performance increases with increasing concentration of surfactant, silicate and soda ash.     

Interaction of lanthanide and actinide with BaHfO3 perovskite: A case study with cerium and uranium

Speciation of actinide (An) and lanthanide (Ln) in technologically important ceramics is very important from both fundamental as well as technological aspects. The intrinsic structural flexibility of perovskite containing AO₆ and BO₁₂ polyhedra makes them suitable and rich hosts for An and Ln. In this work, emphasis was given to deciphering information such as oxidation state, local dopant site, charge compensating defects, excited state kinetics, and so forth in BaHfO₃ (BHO) related to dopant uranium (BHO-U) and cerium (BHO-Ce). Several spectroscopic techniques namely, time-resolved photoluminescence (TRPL), positron annihilation lifetime spectra (PALS), and thermoluminescence (TL) spectroscopy coupled with density functional theory (DFT) were employed to probe the same. Ce and U though are distributed at both Ba and Hf sites, Ce prefers the former, while U prefers the latter site. Uranium on the other hand stabilizes as U⁶⁺ in the form of octahedral uranate ion giving green emission. PALS suggested the formation of defects in BHO-Ce and BHO-U with oxygen vacancies predominating in the former whereas BHO-U perovskites are loaded with cation vacancies and vacancy clusters. These cation vacancies are responsible for lower TL output in BHO-U. TL measurements also suggested cerium doping leads to a higher density of deeper traps in BHO-Ce compared to uranium doping in BHO-U which is in concurrence with DFT results and may have implications in designing afterglow phosphors based on perovskite. We believe this work would have a long-term impact on exploring the potential of perovskite for nuclear waste host and afterglow phosphors applications.     

Interactions of Polyacrylamide with Cationic Surfactants: Thermodynamic and Surface Parameters

The aggregation behaviour of two cationic surfactants, viz. cetyl trimethyl ammonium bromide (CTAB) and N-cetyl pyridinium chloride (CPC), in different concentrations of water-soluble polyacrylamide has been studied in alkaline medium by electrical conductivity and surface tension measurements. A decrease in the critical micelle concentration (CMC) of the surfactant with an increase in polymer content in the mixture was observed. The thermodynamic and surface parameters have been determined and discussed. The results indicate that micellisation becomes more favourable at higher polymer content.