Controlled release of prednisolone acetate from molecularly imprinted hydrogel contact lenses

The aim of this work was to study the influence of methacrylic acid (MAA) as a comonomer and the application of a molecular imprinting technique on the loading and release properties of weakly crosslinked 2‐hydroxyethyl methacrylate (HEMA) hydrogels, with a view toward their use as reloadable soft contact lenses for the administration of prednisolone acetate (PA). The hydrogels were prepared with HEMA (95.90–98.30 mol %) as a backbone monomer, ethylene glycol dimethacrylate (140 mM) as a crosslinker, and MAA (0, 50, 100, or 200 mM) as a functional monomer. Different PA/MAA molar ratios (0, 1 : 8, 1 : 6, and 1 : 4) in the feed composition of the hydrogels were also applied to study the influence of the molecular imprinting technique on their binding properties. The hydrogels (0.4 mm thick) were synthesized by thermal polymerization at 60°C for 24 h in a polypropylene mold. The hydrogels were then characterized by the determination of their swelling and binding properties in water. Their loading and release properties were also studied in 0.9% NaCl and artificial lachrymal fluid. Increasing the MAA content of the hydrogel and applying the molecular imprinting technique led to an increase in the loading capacity of the hydrogel. The optimized imprinted hydrogel showed the highest affinity for PA and the greatest ability to control the release process, sustaining it for 48 h. The results obtained clearly indicate that the incorporation of MAA as a comonomer increased the PA loading capacity of hydrogel. Our data showed that the molecular imprinting technique also had a significant effect on the loading and release properties of the hydrogels. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Properties of PET/clay nanocomposite films

Polyethylene terephthalate (PET) nanocomposite films were prepared by cast extrusion followed by uniaxial stretching, using chill rolls. Transmission electron microscopy (TEM) and wide angle X‐ray diffraction (WAXD) showed that the clay layers were aligned in the machine direction (MD) in the PET/clay nanocomposite (PCN) films. Differential scanning calorimetry (DSC) showed that PCN films have higher crystallinity than the neat PET films, possibly due to the nucleating role of the silicate layers. The PCN films became hazier as the clay content increased, but the film transparency remained in the acceptable range. Oxygen permeability of the PCN films decreased by 23% compared to the neat PET film. This is comparable with predictions of models proposed in the literature. Silicate incorporation brought about 20% increase in the tensile modulus, while the puncture and tear propagation resistance were reduced, due to brittleness of the PCN films. The measured modulus (1.7 GPa) was somewhat smaller than the values predicted using the Pseudoinclusion model (2.1 GPa). POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Mechanical and high velocity impact performance of a hybrid long carbon/glass fiber/polypropylene thermoplastic composite

This research explores mechanical and high velocity impact response of hybrid long carbon/glass fiber-reinforced polypropylene thermoplastic composites (HLFT) with different fiber lengths. The work examines three hybrid long fiber thermoplastic composites, i.e., 5, 10 and 20 mm. The HLFTs were prepared by a combination of extrusion and pultrusion processes and using a cross-head die. Tensile and Izod impact tests were carried out to evaluate the mechanical performance of each HLFT compound. A gas gun with a spherical projectile was used to conduct high velocity impact tests at three velocities of 144, 205 and 240 m/s. The results showed that internal mixing operation caused extensive reduction in fiber length of all three LFT lengths. Tensile strength, modulus and Izod impact test results were the indications of higher values with increase in HLFT length. Comparison of these results for the HLFT with that of corresponding glass/PP LFTs, adopted from earlier work by Shayan Asenjan et al. (J Compos Mater 53:353–360, 2019), showed better performance of HLFT. The high velocity impact results showed a steady higher impact performance with the increase in HFLT fiber length for all impact velocities tested. Comparison of HLFT high velocity impact performance revealed better results for all impact velocities tested with that of the corresponding glass/PP LFT composite.     

Microscopic and macroscopic atomization characteristics of a pressure-swirl atomizer,injecting a viscous fuel oil

Combustion of heavy fuels is one of the main sources of greenhouse gases, particulate emissions, ashes, NOxand SOx. Gasification is an advanced and environmentally friendly process that generates combustible and clean gas products such as hydrogen. Some entrained flow gasifiers operate with Heavy Fuel Oil(HFO) feedstock. In this application, HFO atomization is very important in determining the performance and efficiency of the gasifiers.The atomization characteristics of HFO(Mazut) discharging from a pressure-swirl atomizer(PSA) are studied for different pressures difference(Δp) and temperatures in the atmospheric ambient. The investigated parameters include atomizer mass flow rate( _m), discharge coefficient(CD), spray cone angle(θ), breakup length(Lb), the unstable wavelength of undulations on the liquid sheet(λs), global and local SMD(sauter mean diameter) and size distribution of droplets. The characteristics of Mazut sheet breakup are deduced from the shadowgraph technique. The experiments on Mazut film breakup were compared with the predictions obtained from the liquid film breakup model. Validity of the theory for predicting maximum unstable wavelength was investigated for HFO(as a highly viscous liquid). A modification on the formulation of maximum unstable wavelength was presented for HFO. SMD decreases by getting far from the atomizer. The measurement for SMD and θ were compared with the available correlations. The comparisons of the available correlations with the measurements of SMD andθ show a good agreement for Ballester and Varde correlations, respectively. The results show that the experimental sizing data could be presented by Rosin-Rammler distributions very well at different pressure difference and temperatures.     

Hydrodynamic and heat transfer properties of magnetic fluid in porous medium considering nanoparticle shapes and magnetic field-dependent viscosity

The purpose of this paper is to study the characteristics of the combined convection heat transfer and a micropolar nanofluid flow passing through an impermeable stretching sheet in a porous medium. The nanofluid flow field is affected by a magnetic field perpendicular to the sheet. The dynamic viscosity of the micropolar nanofluid changes under the influence of the magnetic field. The continuity, linear momentum, angular momentum, and energy equations are first simplified using the order of magnitude technique that, along with the applied boundary conditions and the definition of the appropriate parameters, are transferred to the similarity space using the similarity analysis. Then the resulting equations are solved using the Runge–Kutta method.The distinction of the macroscale and microscale flow fields and temperature fields resulting from different nanoparticle shapes was clarified. Increasing the Hartmann number, the vortex viscosity parameter, the magnetic parameter, the nanoparticle volume fraction, and the permeability parameter of the porous media increased the surface friction on the sheet. Increasing the vortex viscosity parameter, the magnetic parameter, and the volume fraction of the nanoparticles increases the Nusselt number.     

Highly efficient supported AlCl3-based cationic catalysts to produce polyα-olefin oil base stocks

The main aim of this research is to decrease the amount of AlCl₃ content that is very corrosive and hazardous in the catalytic system, required for the α-olefin oligomerization without substantial change of final oil features. This was successfully achieved by supporting AlCl₃ on different carriers. More precisely, a series of supported bimetallic catalysts was synthesized by immobilization of AlCl₃ and TiCl₄ onto Al₂O₃, SiO₂, and mixed supports, that is, Al₂O₃/FeCl₃ and SiO₂/FeCl₃. It was found that silica and alumina-based catalysts had higher catalytic activities compared to support free AlCl₃; however, this enhancement for silica-based supports was more significant. According to gel permeation chromatography (GPC) results, the use of single supports, that is, Al₂O₃ and SiO₂, increased oligomer's molecular weight, while the application of mixed supports resulted in the decrease of molecular weight of the oligomers. Viscosity characteristics of the synthesized oligomers have also been studied at two different temperatures of 40 and 100°C (KV⁴⁰ and KV¹⁰⁰). The viscosity index (VI) values, derived from KV⁴⁰ and KV¹⁰⁰, of the prepared oligomers were in the range of 126–145. The molecular weight and termination mechanisms of the oligomers were studied by ¹H-NMR spectroscopy. The obtained results disclosed that the employed reaction conditions led to the production of oligomer chains with various structures including vinylidene (Vd), and di and three-substituted vinylene (2Vn, 3Vn) structures.     

Evolving an Accurate Decision Tree-Based Model for Predicting Carbon Dioxide Solubility in Polymers

Solubility is one of the most indispensable physicochemical properties determining the compatibility of components of a blending system. Research has been focused on the solubility of carbon dioxide in polymers as a significant application of green chemistry. To replace costly and time-consuming experiments, a novel solubility prediction model based on a decision tree, called the stochastic gradient boosting algorithm, was proposed to predict CO₂ solubility in 13 different polymers, based on 515 published experimental data lines. The results indicate that the proposed ensemble model is an effective method for predicting the CO₂ solubility in various polymers, with highly satisfactory performance and high efficiency. It produces more accurate outputs than other methods such as machine learning schemes and an equation of state approach.     

Polyacrylonitrile/α-Fe2O3 Hybrid Photocatalytic Composite Adsorbents for Enhanced Dye Removal

The potential of a novel α-Fe₂O₃/polyacrylonitrile (PAN) hybrid composite adsorbent to eliminate methylene blue (MB) from aqueous solution was evaluated. PAN was selected as the base composite. The presence of α-Fe₂O₃ as nanophotocatalyst on the surface of PAN introduced an efficient photocatalytic hybrid composite adsorbent for degrading MB. Effects of α-Fe₂O₃ nanopowder loading, pH, temperature, MB initial concentration, solar light, and contact time were investigated. Langmuir, Freundlich, and Temkin isotherms were applied to analyze the adsorption behavior. The Freundlich equation provided the best correlation with experimental data. Pseudo-first-order, pseudo-second-order, and intraparticle models were employed. Thermodynamic studies indicated an endotherm and spontaneous adsorption process in a defined temperature range.     

Taguchi Optimization of Solvent-Antisolvent Crystallization to Prepare Ammonium Perchlorate Particles

The sphericity and size of ammonium perchlorate (AP) particles significantly influence the properties of composite propellants. As the AP particles become more spherical, the accumulation coefficient increases, the viscosity during casting decreases, and the particle loading and burning rate increase. Hence, the production of micronized AP particles with an average size between 1 and 20 μm is important to increase the loading percentage of AP in the composite propellant. Here, the Taguchi experimental design was used to optimize the solvent-antisolvent crystallization (SAC) process for the preparation of micronized AP particles with higher sphericity. SAC parameters such as the type of antisolvent, the solvent-to-antisolvent ratio, the antisolvent temperature, the stirring speed, and the retention time were investigated at four levels. The type of antisolvent and the solvent-to-antisolvent ratio were found to mainly contribute to improving the sphericity and size of the AP particles, respectively.