Significance of interface barrier at electrode of hematite hydroelectric cell for generating ecopower by water splitting

Recent increase in energy demand and associated environmental degradation concern has triggered more research towards alternative green energy sources. Eco‐friendly energy in facile way has been generated from abundantly available iron oxides using only few microliters of water without any external energy source. Hydroelectric cell (HEC) compatible to environment benign, low cost oxygen‐deficient mesoporous hematite nanoparticles has been used for splitting water molecules spontaneously to generate green electricity. Hematite nanoparticles have been synthesized by coprecipitation method. Chemidissociated hydroxyl group presence on hematite surface has been confirmed by infrared spectroscopy (IR) and X‐ray photoelectron spectroscopy (XPS). Surface oxygen vacancies in nanostructured hematite have been identified by transmission electron microscopy (TEM), XPS, and photoluminescence (PL) measurement. Hematite‐based HEC delivers 30 mA current with 0.92 V emf using approximately 500 μL water. Maximum off‐load output power 27.6 mW delivered by 4.84 cm² area hematite‐based HEC is 3.52 times higher than reported 7.84 mW power generated by Li‐magnesium ferrite HEC. Electrochemistry of HEC in different irreversible polarization loss regions has been estimated by applying empirical modeling on V‐I polarization curve revealing the reaction and charge transport mechanism of cell. Tafel slope 22.7 mV has been calculated by modeling of activation polarization overvoltage region of 0.11 V. Low activation polarization indicated easy charge/ion diffusion and faster reaction kinetics of Ag/Zn electrode owing to lesser energy barrier at interface. Dissociated H₃O⁺ ions diffuse through surface via proton hopping, while OH^? ions migrate through interconnected defective crystallite boundaries resulting into high output cell current.     

The Investigation of the Fractional-View Dynamics of Helmholtz Equations Within Caputo Operator

It is eminent that partial differential equations are extensively meaningful in physics, mathematics and engineering. Natural phenomena are formulated with partial differential equations and are solved analytically or numerically to interrogate the system’s dynamical behavior. In the present research, mathematical modeling is extended and the modeling solutions Helmholtz equations are discussed in the fractional view of derivatives. First, the Helmholtz equations are presented in Caputo’s fractional derivative. Then Natural transformation, along with the decomposition method, is used to attain the series form solutions of the suggested problems. For justification of the proposed technique, it is applied to several numerical examples. The graphical representation of the solutions shows that the suggested technique is an accurate and effective technique with a high convergence rate than other methods. The less calculation and higher rate of convergence have confirmed the present technique’s reliability and applicability to solve partial differential equations and their systems in a fractional framework.     

Green hydroelectrical energy source based on water dissociation by nanoporous ferrite

Dissociation of water molecule occurs on octahedrally coordinated unsaturated suface cations and oxygen vacancies created by lithium substitution in magnesium ferrite. Lower synthesis temperature of ferrite has generated nanopores in microstructure. Dissociated hydronium and hydroxyl ions are transported through surface and capillary diffusion in porous ferrite network towards attached Zn and Ag electrodes. Water molecule dissociation ability of nanoporous ferrite has been exploited to develop a green electrical energy cell, which is a combination of material science and electrode chemistry. The innovated cell has been nomenclatured as hydroelectric cell (HEC). When HEC is partially dipped in deionized water, spontaneously hydroxide and hydronium ions are produced by water molecule dissociation. Hydronium ions trapped in nanopores develop enough electric field that further dissociates physisorbed water molecules. Thereby, the process of water molecule dissociation is accelerated in a bigger way to increase ionic current in the cell. Oxidation of Zn electrode by hydroxide ion and reduction of H₃O⁺ at Ag electrode develop voltage and electric current in the cell. The HEC cell of a 17 cm² area is able to generate a short circuit current of 82 mA and 920 mV emf with a maximum output power of 74 mW, which is three order higher than reported output power 1.4 μW/cm² produced by water in cement matrix. Hydroelectric cell performance is repetitive, stable and possesses potential to replace traditional ways of generating renewable energy in terms of cost and safety. Copyright © 2016 John Wiley & Sons, Ltd.     

An image differencing method for interface level detection in separation cells

Bitumen extraction from oil sands is carried out in large separation cells using a water-based extraction process. Controlling the Bitumen-froth and Middlings interface in these cells at an optimum level provides significant economical and environmental benefits. Traditional sensors are not reliable in estimating this interface level and novel vision-based sensors have been developed previously to overcome this problem. These sensors estimate the interface level and its confidence for separation cells with a single sight glass. The confidence value only represents the turbidity of the interface and hence cannot be used for control decision making in all process conditions. The current work describes an image differencing algorithm for interface level detection which also facilitates the computation of a confidence estimate that is accurate in most process situations. The confidence value is computed based on noise statistics, an appropriately chosen edge detection method and a change detection algorithm. Another significant advantage of the algorithm is that both the interface level and the confidence estimation procedures can be extended in a straight-forward manner to handle the presence of multiple sight glasses. Off-line results show that the algorithm accurately detects the interface level in normal process conditions (with high confidence values) and outputs correct confidence values in other situations with very low false-positive and false-negative error rates. On-line industrial implementation results show that the vision sensor tracks the interface level very closely and results in significant automation of plant.     

Significant improvement for the functional properties of konjac glucomannan based on phase separation

Konjac glucomannan (KGM) serves as a stabiliser due to its high molecular weight and viscosity. However, these properties limit its addition in food products, especially in drinks. The main aim of this study was to improve the functional properties of KGM by a green and effective method, that is phase separation. It was found that increasing temperature accelerated phase separation of KGM/gum arabic mixture. KGM‐rich phase was characterised and its physical properties were investigated by different methods. Crystal property showed no significant changes after phase separation. Nevertheless, rheological properties indicated that the viscosities of samples after phase separation (FKGM) decreased dramatically. Their emulsifying capacities also improved. Moreover, the differences in molecular rearrangement at the oil–water interface were also studied by using interfacial rheology. These results suggested that FKGM with low viscosity had better interfacial properties, and thus may have potential applications as food ingredients.     

Ultra-light-weight composites from bamboo strips and polypropylene web with exceptional flexural properties

Fine bamboo strips (BSs) have been laid on polypropylene (PP) web, stacked, and compression molded to prepare unconsolidated light-weight (0.312 g/cm³) composites. Composite properties are superior compared with jute-based composites and bamboo strips show potential to replace fiberglass or polyurethane in composites. Flexural strength, modulus, offset yield load, and Noise Reduction Coefficient (NR) of the BS–PP composites are 5.8×, 2.9×, 6.5×, and 1.4× higher, respectively, compared to jute–PP composites. Bamboo-based non-consolidated composites with excellent mechanical and sound absorption properties utilizing the methods described in this research provide an opportunity to manufacture functional composites with bio-based materials leading to reduction of environmental pollution and sustainable manufacturing.     

Characterizing cerebral oxygen metabolism employing oxygen-17 MRI/MRS at high fields

This article provides a comprehensive overview of oxygen (¹⁷O) magnetic resonance spectroscopy and imaging, including the advantages and challenges offered by the different methods developed thus far. The physiological role and relevance of oxygen, and its participation in aerobic metabolism, are addressed to emphasize the importance of the investigations and the efforts related to these developments. Furthermore, a number of methods employed in the determination of the cerebral metabolic rate of oxygen in neural cells will be presented, focusing primarily on methodologies enabling absolute quantification.     

Gold nanorods mediated controlled release of doxorubicin: nano-needles for efficient drug delivery

Use of cysteamine hydrochloride (Cys-HCl) protected gold nanorods (GNRs) as efficient carrier of widely used anti-cancer drug doxorubicin using folic acid as navigational molecule is presented in this work. GNRs were found to have excellent drug loading capacity of >97 %. A detailed comprehension of in vitro drug release profile under ideal physiological condition was found to obey 1st order kinetics at pH 6.8, 5.3 and 7.2, an ideal milieu for drug delivery to solid tumours.