Structural,mechanical, and electrical properties of carbon nanoparticles synthesized from diesel

We studied the elemental analysis, structural morphology, mechanical, and electrical properties of carbon nanoparticles synthesized from diesel. The spherical carbon particle size in the range of about 10 to 80 nm in diameter was observed in scanning electron microscope (SEM) studies that were identified by Atomic force microscopy (AFM) study as an aggregation of carbon particles of average size 2.5 nm. The surface rms of carbon nanoparticle thin film (CNTF) was measured directly by AFM and found 0.22 nm. The Derjaguin–Muller–Toporov (DMT) elastic modulus of carbon nanoparticles (CNPs) was measured by PeakForce QNM mode of AFM. The minimum and maximum elastic modulus was measured of 0.40 GPa and 43.89 GPa, respectively. The resistivity, conductivity, magneto resistance, mobility, and average Hall co-efficient were measured by “Ecopia Hall-effect measurement system” by four-point Van der Pauw approach at ambient condition. We demonstrated I–V characteristic at the Indium/CNTF thin film interface, which is accompanied by rectifying behavior.     

A simple approach to solving the kinematics of the 4-UPS/PS (3R1T) parallel manipulator

Journal of Mechanical Science and Technology - This work reports on the position, velocity and acceleration analyses of a four-degrees-of-freedom parallel manipulator, 4-DoF-PM for brevity, which...     

Hole Content Dependent Fluctuation Diamagnetism in YBa2Cu3O7−δ: Possible Role of the Pseudogap

Journal of Superconductivity and Novel Magnetism - This study focuses on the temperature and hole content dependent fluctuation diamagnetism of hole-doped YBa2Cu3O7?δ (Y123) high-Tc...     

Preparation and characterizations of activated carbon from kenaf fiber for equilibrium adsorption studies of copper from wastewater

The potential of activated carbon prepared from kenaf fiber (KF) to remove copper (II) from aqueous effluents was investigated. The fibers were first semi-carbonized, then impregnated with potassium hydroxide (KOH) and finally activated by using carbon dioxide (CO₂) gas to produce activated carbon. Pore structure and physical characteristics of the prepared kenaf fiber activated carbon (KFAC) were determined. Adsorption studies for divalent copper (Cu) ions were carried out to delineate the effect of contact time, temperature, pH and initial metal ion concentration on equilibrium adsorption capacity. The experimental data followed pseudo-second-order kinetics and Elovich Model than pseudo-first-order. Langmuir, Freundlich and Temkin models were implemented to analyze the parameters for adsorption at 30 °C, 50 °C and 70 °C. Thermodynamic parameters such as ??G ^o , ??H ^o and ??S ^o which represent Gibbs free energy, enthalpy and entropy, respectively, were evaluated. It was concluded that activated carbon from kenaf fiber (KFAC) can be used as an efficient adsorbent for removal of Cu (II) from synthetic wastewater.     

Annealing effects on the optical and morphological properties of ZnO nanorods on AZO substrate by using aqueous solution method at low temperature

Vertically aligned ZnO nanorods (NRs) on aluminum-doped zinc oxide (AZO) substrates were fabricated by a single-step aqueous solution method at low temperature. In order to optimize optical quality, the effects of annealing on optical and structural properties were investigated by scanning electron microscopy, X-ray diffraction, photoluminescence (PL), and Raman spectroscopy. We found that the annealing temperature strongly affects both the near-band-edge (NBE) and visible (defect-related) emissions. The best characteristics have been obtained by employing annealing at 400°C in air for 2 h, bringing about a sharp and intense NBE emission. The defect-related recombinations were also suppressed effectively. However, the enhancement decreases with higher annealing temperature and prolonged annealing. PL study indicates that the NBE emission is dominated by radiative recombination associated with hydrogen donors. Thus, the enhancement of NBE is due to the activation of radiative recombinations associated with hydrogen donors. On the other hand, the reduction of visible emission is mainly attributed to the annihilation of OH groups. Our results provide insight to comprehend annealing effects and an effective way to improve optical properties of low-temperature-grown ZnO NRs for future facile device applications.     

Techno-economic evaluation of energy efficiency measures in high rise residential buildings in Malaysia

In this paper, a survey was conducted on a residential condominium to estimate energy use by different household appliances along the lighting energy estimation in public areas. It has been found that about 2.17 GWh of energy is used in the condominium annually by different types of household appliances and lightings in public areas. As there is significant potential to reduce the energy used, different energy savings measures have been applied and energy savings, bill savings, life cycle cost analysis have been estimated and presented in this paper. It has been found that a cumulative amount of 2.4 GWh of energy can be saved for about 10 years with the implementation of different energy savings strategies proposed for appliances and lighting in public areas. However, good maintenance practices and good energy management practices should be employed continuously to maintain high energy efficiency and high performance of the equipment used and the entire building. It has been found that some of the measures like reducing air conditioning load and reducing heat gain through window tinting are economically very viable as payback period is very short. More advantageously, some of the measures can be implemented without investing significant cost. Ultimately, a key driver in the success of energy efficiency is the education and attitude of the stakeholders in the building industry, and end users who are committed to practice energy saving measures.     

Inhalation risk of indoor aerosol spray products commercially available in Bangladesh

Today, urbanised people spend most of their time in indoor environments, and the risk of exposure to toxic materials in an indoor environment is of great concern. This paper considers sources for the inhalation risk of aerosol sprays by measuring the particle size distributions of some of the most popular products that are commercially available in Bangladesh, and examines the degree of toxicity and the health risk via the respirability of the products. Results show that thoracic and respirable fractions of the suspended particulate matter are present in the tested samples and hence the spray products may pose a significant health risk.     

Regioselective Alkoxylation of 2,2,4-Trimethyl-1,3-pentanediol

An efficient procedure for the regioselective synthesis of secondary alcohol alkoxylates from 2,2,4-trimethyl-1,3-pentanediol (TMPD) is described. TMPD was reacted with propylene oxide followed by ethylene oxide in the presence of a catalytic amount of alkali metal hydroxide to form secondary alcohol alkoxylates. Instead of a mixture of compounds resulting from the reaction of TMPD and propylene oxide, the primary hydroxyl group of the TMPD reacted to form predominantly 2,2,4-trimethyl-3-hydroxypentylpropoxylate as the major product. On further ethoxylation the less hindered secondary hydroxyl group of the 2,2,4-trimethyl-3-hydroxypentylpropoxylate reacted predominantly. ¹³C NMR indicated that the secondary hydroxyl group (96.2 mol%) of TMPD remained unreacted during alkoxylation.