广义物质平衡计算在凝析气藏开采动态预测中的应用

从经济的角度考虑 ,对小型凝析气藏衰竭式开采动态的预测往往不必或不值得进行数值模拟研究。常规物质平衡 (黑油 )计算方法只局限于黑油和干气藏 ,应用于凝析气藏则存在很大的误差。Walsh提出的广义物质平衡计算方法 ,可用于包括黑油、干气藏、挥发油气藏和凝析气藏在内的所有油气藏。文中将一个小型凝析气藏衰竭式开采动态的数值模拟结果与广义物质平衡计算结果进行了对比 ,结果表明 ,Walsh方法简便、应用更广泛 ,可用于规模较小、不适合进行数值模拟研究的凝析气藏的现场开发优化。     

A transmit/receive IF chip set for WCDMA mobiles in 0.35 /spl mu/m CMOS

An implementation of the IF section of WCDMA mobile transceivers with a set of two chips fabricated in an inexpensive 0.35-/spl mu/m two-poly three-metal CMOS process is presented. The transmit/receive chip set integrates quadrature modulators and demodulators, wide dynamic range automatic gain control (AGC) amplifiers, with linear-in-decibel gain control, and associated circuitry. This paper describes the problems encountered and the solutions envisaged to meet stringent specifications, with process and temperature variations, thus overcoming the limitations of CMOS devices, while operating at frequencies in the range of 100 MHz-1 GHz. Detailed measurement results corroborating successful application of the new techniques are reported. A receive AGC dynamic range of 73 dB with linearity error of less than /spl plusmn/2 dB and spread of less than 5 dB for a temperature range of -30/spl deg/C to +85/spl deg/C in the gain control characteristic has been measured. The modulator measurement shows a carrier suppression of 35 dB and sideband/third harmonic suppression of over 46 dB. The core die area of each chip is 1.5 mm/sup 2/.     

基于图像数据库的动态场景生成系统

实现各类目标和背景下动态场景的计算机编辑和生成，首先应对组成动态场景的要素进行分析，即目标，目标运动规律和特殊事件四个要素，然后通过编程由四个模块完成相应功能。目标，背景编辑模块可对目标，背景图像进行各种处理，并对重要特征量进行计算，运动路径模块可指定目标的运行规律，包括路线，大小和角度变化等。特殊事件模块可加入独立目标的各类典型事件，如运动的干扰物等。最后通过动态场景合成由计算机自动生成所需的动态场景图像。所需的原始目标，背景图像来源于图像数据库管理系统，通过索引项可便携地找到。     

纳米碳管阵列

在概括纳米碳管阵列特异的场发射效应及在场发射器方面应用前景的基础上，介绍了合成纳米碳管阵列的研究历程以及化学气相沉积法在纳米碳管阵列合成方面的重要意义，就当前纳米碳管阵列的快速合成与低温合成两个发展方向进行了概述，并指出等离子体化学气相沉积法能有效地用于纳米碳管阵列的低温合成。     

向家坝水电站施工组织设计简介

向家坝水电站为装机６０００ＭＷ的巨型电站，其施工组织设计，结合工程总体布置，选用两期导流，一期先围左岸，二期围右岸的施工程序。一期由右侧的主河床泄流、通航及漂木，二期由导流底孔和缺口泄流，临时船闸通航，散漂木材在坝址上游收漂后陆路转运。大坝混凝土采用塔带机配缆机浇筑。电站第一批机组发电工期为７年，总工期为９年６个月。     

GaAs亚微米自对准工艺技术研究

总结了在５０ｍｍＧａＡｓ圆片上实现自对准介质膜隔离等平面工艺技术的研究，着重描述了离子注入、自对准亚微米难熔栅制备、钝化介质膜生长、干法刻蚀、电阻和电容制备等关键工艺的研究结果。这套工艺的均匀性、重复性好，在５０ｍｍＧａＡｓ圆片上获得了满意的成品率。采用这套工艺已成功地研制出多种性能良好的ＧａＡｓＩＣ和ＧａＡｓ功率ＭＥＳＦＥＴ，证明国家自然科学基金委员会这一重大课题的选择对发展我国ＧａＡｓＩＣ确实具有重大意义。     

Finite element micromechanical modelling of unidirectional fibre-reinforced metal-matrix composites

Typical finite element formulations and models for unidirectional composite materials are reviewed. The application of micromechanical finite element analysis to the modelling of unidirectional fibre-reinforced metal-matrix composites is demonstrated by presenting some studies from recent publications. It is shown that while analytical models offer a simple tool for obtaining the overall response of composites, finite element analysis provides more accurate and detailed characterisation of composite properties for complicated geometries and constituent property variations. Various effects that influence the stress/strain response and fibre/matrix deformation of composites are studied through modelling. These effects include the fibre coating and reaction layer, fibre shape and distribution, metallurgical and environmental factors, stress distributions and damage. It is demonstrated that the properties and constituent phase interaction of metal-matrix composites are best modelled by finite element analysis. It is emphasized that in order to obtain good predictions, the models must be coupled with first-hand characterisations of the constituent phases and their interactions, including the thermal history of the specimens.     

国产CN—31催化剂与ICI65—2催化剂工业应用的比较

国产轻油预转化催化剂与进口催化剂相比,具有性能相当、价格低廉、供应方便等优势。国产预转化催化剂需在较高的液空速、温度较低的条件下实现烃类转化反应,生成含甲烷60%以上的富气。采用国产催化剂能明显反映性能价格比。文章对两种催化剂进行了工业应用比较和分析。     

章江水闸安全论证

结合江西赣州章江水闸安全鉴定工作,阐明了水闸安全鉴定基本内容和方法,并参照有关规范和标准作出了安全分析评价.     

尼龙1010的流变性能研究

用XLY-Ⅱ重型毛细管流变仪研究了尼龙1010的流变特性。实验结果表明,尼龙1010为假塑性流体;在210～250℃范围内,其非牛顿指数π为0.63～0.71;恒γw＇下的粘流活化能随γw＇的增大而减小。