Effect of different polypropylenes and compatibilizers on the rheological,mechanical and morphological properties of nylon 6/PP blends

In this work, the rheological, mechanical and morphological properties of nylon 6/polypropylene compatibilized blends were investigated. Two types of polypropylene were used. One with MFI of 40 g/10 min (PP H103) and the other with MFI of 3.5 g/10 min (PP H503). The compatibilizers used were polypropylene grafted with 6% of acrylic acid (PPgAA) and polypropylene grafted with 1% of maleic anhydride (PPgMA). The blends composition was 80/20 (wt%) for the PA6/PP binary blends and 80/10/10(wt%) for the nylon 6/PPgAA/polypropylene and nylon 6/PPgMA/polypropylene ternary blends. Torque rheometry analysis showed that when PPgAA and PPgMA were added to nylon 6/polypropylene blends, there was an increase in the torque, indicating that reactive compatibilization has occurred. There is no influence of the polypropylene MFI on the mechanical properties of the uncompatibilized and compatibilized blends. The impact strength of the blends containing PPgMA were greater than those of the blends containing PPgAA. The blends containing PPgAA are unstable. SEM analysis showed that PPgMA improves considerably the adhesion between PA6/PP phases, leading to good mechanical properties.     

Green pavements: reuse of plastic waste in asphalt mixtures

Nowadays, the disposal of plastic waste is an issue of major concern worldwide because of its considerable volume and growth. An option to tackle this problem is to recycle this waste. This alternative reduces the quantity of net discards, conserves both material and energy and provides a comparatively simple way to make a substantial reduction in the overall volume of solid waste. The purpose of this study is to investigate an environmentally friendly approach about the influence of recycling different percentages of urban and rural plastic waste by adding them in a dry process on an asphalt mixture, through a comparative laboratory study. The resulting mixtures are analyzed considering their volumetric parameters and the values from diverse laboratory mechanical tests. The performance tests include, Marshall stability, Marshall quotient, indirect tensile strength, fracture energy, resilient modulus, permanent deformation and creep compliance, which were carried out on unmodified and modified hot asphalt mixtures. The obtained results are presented and discussed in this paper showing that the reuse of recycled plastics in asphalt mixtures is a viable alternative that contributes to the reduction of plastic wastes as well as the protection of the environment.     

Biomimetic Concealing of PLGA Microspheres in a 3D Scaffold to Prevent Macrophage Uptake

Scaffolds functionalized with delivery systems for the release of growth factors is a robust strategy to enhance tissue regeneration. However, after implantation, macrophages infiltrate the scaffold, eventually initiating the degradation and clearance of the delivery systems. Herein, it is hypothesized that fully embedding the poly(d,l ‐lactide‐co‐glycolide acid) microspheres (MS) in a highly structured collagen‐based scaffold (concealing) can prevent their detection, preserving the integrity of the payload. Confocal laser microscopy reveals that non‐embedded MS are easily internalized; when concealed, J774 and bone marrow‐derived macrophages (BMDM) cannot detect them. This is further demonstrated by flow cytometry, as a tenfold decrease is found in the number of MS engulfed by the cells, suggesting that collagen can cloak the MS. This correlates with the amount of nitric oxide and tumor necrosis factor‐α produced by J774 and BMDM in response to the concealed MS, comparable to that found for non‐functionalized collagen scaffolds. Finally, the release kinetics of a reporter protein is preserved in the presence of macrophages, only when MS are concealed. The data provide detailed strategies for fabricating three dimensional (3D) biomimetic scaffolds able to conceal delivery systems and preserve the therapeutic molecules for release.     

Application of visible and near infrared spectroscopy in non-destructive evaluation of cement materials

In the twenty-first century, there has been rapid urbanization in economically emerging countries. Many scientific research studies have proposed methods to monitor the quality of materials used in engineering works. Quality inspections are most often made of structure-related materials such as concrete. All the concrete used in construction work is subjected to a test that breaks the samples to evaluate its final mechanical strength. In this sense, remote sensing can contribute to mapping and monitoring construction materials, allowing investigation and identification of various properties such as mechanical strength and water content in a non-destructive manner. The materials can be inspected directly on site, in a rapid, non-invasive, and inexpensive manner; this is crucial for the ongoing process of construction. The spectral behaviour of four different mechanical strengths of two cement materials based on Portland cement, cement paste, and mortar was observed using a FieldSpec® 3 spectroradiometer. The spectral curves generated by recording the reflected and absorbed electromagnetic radiation of the samples were interpreted based on the theory of vibrational and electronic spectroscopy. The objective of this work is to show a novel technique for assisting in the analysis of solid samples using visible and near infrared spectroscopy. Through this study, a spectral contrast between different samples of the paste and mortar was found. Besides, it was possible to detect the presence and the corresponding proportion of water in the samples. Wavelet analysis enabled records of statistical evidence of spectral contrast, and showed that the depth of water absorption features is inversely proportional to compressive strength in the cement materials under study. This work is innovative, because there are no studies in the literature on the application of this technique as an aid tool for differentiating compressive strengths of Portland-cement-based materials.     

Factors affecting glaze transparency of ceramic tiles manufactured by the single firing technique

Transparency is an extremely important optical property of several glazes used in the ceramic tile sector. The present work aimed to identify the causes of loss of transparency presented by some ceramic glazes composed of frits with chemical compositions typical of optically transparent glasses. After identifying the causes of low transparency presented by several ceramic glazes based on microstructural analyses, X-ray diffraction and scanning electron microscopy, attempts were made to increase the transparency of these glazes by altering their chemical compositions. The results suggest that the addition of alumina – through distinct mineral sources – may be an interesting alternative to prevent the crystallization of calcium silicates, which reduce the transparency of glazes used in the ceramic tile sector.     

Mycotoxin occurrence in beer produced in several European countries

The occurrence of ochratoxin A, trichothecenes, fumonisins and aflatoxins in a sample of 106 beers produced in several European countries, was investigated. The analyses were conducted using high-performance liquid chromatography with fluorimetric detection for ochratoxin A and aflatoxins, gas-chromatography and high-performance liquid chromatography, both coupled with mass spectrometer, for trichothecenes and fumonisins, respectively. Aflatoxins were not detected in any samples, whereas ochratoxin A, deoxynivalenol and fumonisins were found in a relatively high number of samples. Their presence was at low levels in all samples; however, some differences were observed between the European countries. As regards ochratoxin A, beer samples from southern Europe showed levels always lower than 0.040 μg l^?1, while the samples from other European countries showed significantly higher values, up to 0.189 μg l^?1 (P < 0.001). For fumonisins, the levels of Italian beers were significantly higher compared to the samples from other countries (P = 0.006).     

De-nickelification of 70/30 Cupronickel Tubing in a Cooling Heat Exchanger

A cupronickel heat exchanger failed after 10?years of service. The cooling heat exchanger was in service in a marine environment, with water flowing along shellside and natural gas along tubeside. Many tubes showed leakages during a regular maintenance test. A comprehensive failure analysis of the heat exchanger revealed the de-nickelification process on the external side of the damaged tubes (shellside). The de-nickelification originated from a large deposit of sea water scale, over tube lengths, which completely covered the area just outside the internal portion of the tubesheet, and occurred because of a failure of the regular cleaning operation. Stagnant water and possible hot spot formations on the tubes probably caused the phenomenon.     

Experimental Study of an Adding Interferometer at Millimeter Waves

In order to study an original detection architecture for future cosmology experiments based on wide band adding interferometry, we have tested a single baseline bench instrument based on commercial components. The instrument has been characterized in the laboratory with a wide band power detection setup. A method which allows us to reconstruct the complete transfer function of the interferometer has been developed and validated with measurements. This scheme is useful to propagate the spurious effects of each component till the output of the detector.