1999年长江洪水及几点认识

Following the basin wide heavy flood on Changjiang River in 1998, a si gnificant flood occurred in 1999. Comparative analysis of both floods in terms of flows and flooding situations shows that both floods had one common feature, that is, the flood stages were fairly high. But they differed greatly at the sa me time, that is, the 1998 flood was a basin wide heavy one while the 1999 flood was a significant local one. At Yichang station there occurred eight flood pea ks in 1998, while in 1999 only three peaks took place. The maximum peak dischar ge at this station in 1999 was 57 600 cubic meters per second, which was smaller than that in 1998. The maximum flood-volume in 30 d of the 1998 flood at this s t ation equaled that in 1954, when an extraordinary heavy flood happened on the River, while the maximum flood-volume in 30 d in 1999 was 25.8 billion cubic me t ers per second smaller than the 1998 one. It is seen that inflow floods from th e upstream Changjiang River (above Yichang) in 1999 were not so big. Comparison of flood volumes in longer period shows that the 1999 flood was relatively conc entrated while the 1998 one had lasted longer duration. Analysis shows that flo oding situations in both years differed significantly in terms of the flood volu mes diverted from river channels due to dyke breaches and collapses, the cases o f polder embankment collapses, the areas of inundated cultivated land and the nu mbers of dangerous events for hydraulic structures. These differences had been resulted from the different properties of both floods and the dyke strengthening efforts made after the 1998 flood. It is seen that flood control engineering c onstructions initiated in the days following the 1998 flood have played an impor tant role in fighting the 1999 flood.     

Fatigue crack propagation properties from small sized rod specimens

Mechanical properties characterization is needed in many industrial applications yet sufficient amount of material for fabricating standard-sized testing specimens is often not available. Techniques for testing miniaturized specimen must be adopted. Much effort has been made to develop techniques for impact, fracture toughness and tensile properties of sub-sized specimens. Work on the testing of fatigue properties is more limited. In this study, fatigue crack propagation behavior is evaluated from the growth of surface crack in a cylindrical rod under tension. Rods of various lengths and diameters were tested. As the size of the rod specimen is reduced, the fatigue crack growth rate tends to increase when correlated using the stress intensity factor range. This increase is explained largely by the decrease in the degree of premature crack closure in the small specimens. Valid fatigue crack growth data can be obtained among the specimens examined except on the crack growth on the surface of the smallest specimen, which has a length of 26 mm and diameter of 8 mm. Even so, valid data can still be elucidated on the latter specimen if the interior growth is considered. The dimensions of the latter specimen allow fatigue properties to be evaluated using broken remnants from impact or other test specimens.     

一种应用于二次布局的有效划分方法

提出了一种基于二次布局的结合MFFC结群和hMETIS划分的算法.实验表明:这种方法能得到很好的布局结果,但是运行消耗的时间比较长.为了缩短划分在二次布局中运行的时间,提出了一种改进的结群算法IMFFC,用它在二次布局中做划分.与前者相比较,这种方法虽然布局质量稍差,但速度更快.     

L-带掺铒光纤放大器的研究与进展

通过理论计算，比较了C－带掺铒光纤放大器和L－带掺铒光纤放大器的增益特性，并较为全面地阐述了近几年来国内外对L－带掺铒光纤放大器的研究情况。通过对L－带掺铒光纤放大器工作原理的分析，总结出新的设计思路与方案，提出了一些新的研究点。     

基于Java RMI技术的大型机群监控系统的设计与实现

机群监控系统可有效的提高大型机群的可管理性和可用性。本文提出了一种基于JAVA RMI技术的机群监控系统模型，并给出其实现方法。该系统具有开发快速、可跨平台、易于扩展等特性。     

基于S5933的PCI总线与8051的接口设计

简要介绍了PCI总线的特点，重点介绍了AMCC公司推出的S593X系列的高性能接口控制器，并通过实践给出基于S5933的PCI总线和8051的接口设计技术。     

降低精炼钢中氢氧含量的探索

主要介绍通过优化炼钢生产工艺,使产品满足新的技术要求:S≤0.010％,P≤0.015％.[H]≤0.0002％,[O]≤0.0045％,[N]≤0.0055％。     

管内含蜡原油降温过程中的放热问题

利用两种管段和两种原油，进行了降温过程自然对流放热参数的测试和研究。采用滞流点确定降温第二阶段中凝油边界的移动，区分管内的对流区与导热区。由实验数据回归得到适用于含蜡原油降温过程的自然对流放热准则方程式。用该方程式计算的自然对流放热系数值比按无限空间自然对流准则方程式计算值小20％～50％。