Application of intelligent real-time image processing in fitness motion detection under internet of things

The purpose is to study the applicability of digital and intelligent real-time Image Processing (IP) in fitness motion detection under the environment of the Internet of Things (IoT). Given the absence of real-time training standards and possible workout injury problems during fitness activities, an intelligent fitness real-time IP system based on Deep Learning (DL) is implemented. Specifically, the keyframes of the real-time images are collected from the fitness monitoring video, and the DL algorithm is introduced to analyze the fitness motions. Afterward, the performance of the proposed system is evaluated through simulation. Subsequently, the Noise Reduction (NR) performance of the proposed algorithm is evaluated from the Peak Signal-to-Noise Ratio (PSNR), which remains above 20 dB for seriously noisy images (with a noise density reaching up to 90%). By comparison, the PSNR of the Standard Median Filter (SMF) and Ranked-order Based Adaptive Median Filter (RAMF) algorithms are not higher than 10 dB. Meanwhile, the proposed algorithm outperforms other DL algorithms by over 2.24% with a detection accuracy of 97.80%; the proposed system can adaptively detect the fitness motion, with a transmission delay no larger than 1 s given a maximum of 750 keyframes. Therefore, the proposed DL-based intelligent fitness real-time IP algorithm has strong robustness, high detection accuracy, and excellent real-time image diagnosis and processing effect, thus providing an experimental reference for sports digitalization and intellectualization.

     

Tensile Properties and Failure Mechanism of a New 3D Nonorthogonal Woven Composite Material

Tensile properties and failure mechanism of a newly developed three-dimensional (3D) woven composite material named 3D nonorthogonal woven composite are investigated in this paper. The microstructure of the composite is studied and the tensile properties are obtained by quasi-static tensile tests. The failure mechanism of specimen is discussed based on observation of the fracture surfaces via electron microscope. It is found that the specimens always split along the oblique yarns and produce typical v-shaped fracture surfaces. The representative volume cell (RVC) is established based on the microstructure. A finite element analysis is conducted with periodical boundary conditions. The finite element simulation results agree well with the experimental data. By analyzing deformation and stress distribution under different loading conditions, it is demonstrated that finite element model based on RVC is valid in predicting tensile properties of 3D nonorthogonal woven composites. Stress distribution shows that the oblique yarns and warp yarns oriented along the x direction carry primary load under x tension and that warp yarns bear primary load under y tension.     

Reliability analysis on systems with self-healing and self-repairing under different environments and shock models

Inspired by the process of self-healing of biological damage, high technology materials with self-healing and self-repairing mechanisms have been developed for high reliability and long lifetime. Therefore, the reliability modeling on intelligent systems with healing performance has become a research hotspot. Based on the diversity of healing mechanisms, this paper proposes a two-phase reliability model method on self-healing and self-repairing systems. Impacts of environments, shock loads, self-healing, and self-repairing mechanisms are taken into account in this novel model. Besides, system lifetime and some reliability indexes under two shock models are derived, respectively. Moreover, Monte Carlo simulations are conducted to verify the accuracy of reliability under two models. Finally, an engineering case of metallized film capacitor is provided to illustrate the effectiveness and applicability of the proposed models by comparing numerical results and simulation results.     

Comparison of approaches based on optimization and algebraic iteration for binary tomography

Binary tomography represents a special category of tomographic problems, in which only two values are possible for the sought image pixels. The binary nature of the problems can potentially lead to a significant reduction in the number of view angles required for a satisfactory reconstruction, thusly enabling many interesting applications. However, the limited view angles result in a severely underdetermined system of equations, which is challenging to solve. Various approaches have been proposed to address such a challenge, and two categories of approaches include those based on optimization and those based on algebraic iteration. However, the relative strengths, limitations, and applicable ranges of these approaches have not been clearly defined in the past. Therefore, it is the main objective of this work to conduct a systematic comparison of approaches from each category. This comparison suggested that the approaches based on algebraic iteration offered both superior reconstruction fidelity and computation efficiency at low (two or three) view angles, and these advantages diminished at high view angles. Meanwhile, this work also investigated the application of regularization techniques, the selection of optimal regularization parameter, and the use of a local search technique for binary problems. We expect the results and conclusions reported in this work to provide valuable guidance for the design and development of algorithms for binary tomography problems.     

Direct raycasting of unstructured cell-centered data by discontinuity Roe-average computation

In the field of computational fluid dynamics (CFD), the upwind finite volume method (FVM) is widely applied to solve 3D flows with discontinuity phenomena (e.g., shock waves). It produces unstructured data at the center of each cell (cell-centered data) with the flow discontinuity constraint on the inner-face between face-neighboring cells. For visualization, existing approaches with interpolation usually pre-extrapolate cell-centered data into cell-vertexed data (data values given at cell vertices) and only handle cell-vertexed data during actual rendering, which unconsciously depress the rendering accuracy and violate the discontinuity constraint. In this paper, we propose a novel method to visualize cell-centered data directly avoiding extrapolation and keep the discontinuity in the rendering data on the framework of multi-pass raycasting. During resampling, the field is reconstructed using the original cell-centered data value and the cell-gradient estimated by Green–Gauss theorem. To keep the discontinuity, we reconstruct the field at an inner-face resampled point using both the face-adjacencies and get two discontinuous field values. Then the field is obtained by computing Roe-average of the two. The analysis and experiments demonstrate that our approach gains a high-accuracy reconstruction and leads to a high-quality image.     

Robustness of fuzzy operators in environments with random perturbations

In many applications, such as intelligent decision systems, there are usually random perturbations caused by the constant changing of real situations, thus the analysis of the robustness with respect to random perturbations is practically important. In the side of fuzzy methods, a corresponding problem arises: will a small random perturbation of fuzzy input cause a big variance of fuzzy output? This paper study the robustness of fuzzy schemes in environments with random perturbations. It focuses on fuzzy algebraic operators, and proposes two methods to analyze their robustness in environments with random perturbations. The effectiveness and features of the methods are shown by simulations.     

混沌权值变异的Huffman树图像加密算法

提出一种采用混沌权值变异的Huff man树的图像加密算法.此算法在熵编码过程中,以基本的Huffman树为标准,利用双耦合混沌序列1对DC系数进行树的结构未变异、路径值变异的加密;再利用双耦合混沌序列2对AC系数进行码字序号的加密.论文对算法进行了仿真,并对安全性、计算复杂度、压缩比性能进行了分析.实验结果表明,该算法基本上不影响压缩效率,且计算复杂度低、安全性高和实时性好,可用于网络上的图像服务.