一种用于太阳热水器的智能控制电路

根据本刊2004年第1期刊登的《太阳热水器智能控制方案设计的探讨》一文的内容进行具体电路设计，可以设计成多种形式的电路。本文介绍一种运用于太阳热水器的全自动控制电路。该电路实现了水位、水温设定及显示功能，全自动的分段上水、止水及电加热补偿功能。经过较长时间的使用实践，效果很好。     

自聚焦共焦探测系统轴向分辨率的影响因素

从微小内尺度测量角度出发，研究了针孔尺寸、探测器位置、透镜的数值孔径、放大倍率和杂散光等对自聚焦共焦式探测系统轴向分辨率的影响。结果表明，为提高系统的轴向分辨率，需将有效针孔尺寸控制在≤2.5；探测器需配以精密微调整装置以实现横向精确定位；选用差动共焦光路及大数值孔径和大放大倍率的自聚焦透镜，同时，偏振光路的使用将有效的提高系统的信噪比。     

温州城市河道生态调水控制性工程设置与效果分析

生态调水可以减轻河道水污染,通过对几年来生态调水问题的研究,提出相应的对策。为改善调水效果、节约水量,在内河增设控制闸坝,并对其调水效果进行计算分析。结果表明新增闸坝对部分调水效果有一定程度改善,并能节约一定水量。     

1999年长江洪水及几点认识

Following the basin wide heavy flood on Changjiang River in 1998, a si gnificant flood occurred in 1999. Comparative analysis of both floods in terms of flows and flooding situations shows that both floods had one common feature, that is, the flood stages were fairly high. But they differed greatly at the sa me time, that is, the 1998 flood was a basin wide heavy one while the 1999 flood was a significant local one. At Yichang station there occurred eight flood pea ks in 1998, while in 1999 only three peaks took place. The maximum peak dischar ge at this station in 1999 was 57 600 cubic meters per second, which was smaller than that in 1998. The maximum flood-volume in 30 d of the 1998 flood at this s t ation equaled that in 1954, when an extraordinary heavy flood happened on the River, while the maximum flood-volume in 30 d in 1999 was 25.8 billion cubic me t ers per second smaller than the 1998 one. It is seen that inflow floods from th e upstream Changjiang River (above Yichang) in 1999 were not so big. Comparison of flood volumes in longer period shows that the 1999 flood was relatively conc entrated while the 1998 one had lasted longer duration. Analysis shows that flo oding situations in both years differed significantly in terms of the flood volu mes diverted from river channels due to dyke breaches and collapses, the cases o f polder embankment collapses, the areas of inundated cultivated land and the nu mbers of dangerous events for hydraulic structures. These differences had been resulted from the different properties of both floods and the dyke strengthening efforts made after the 1998 flood. It is seen that flood control engineering c onstructions initiated in the days following the 1998 flood have played an impor tant role in fighting the 1999 flood.     

Fatigue crack propagation properties from small sized rod specimens

Mechanical properties characterization is needed in many industrial applications yet sufficient amount of material for fabricating standard-sized testing specimens is often not available. Techniques for testing miniaturized specimen must be adopted. Much effort has been made to develop techniques for impact, fracture toughness and tensile properties of sub-sized specimens. Work on the testing of fatigue properties is more limited. In this study, fatigue crack propagation behavior is evaluated from the growth of surface crack in a cylindrical rod under tension. Rods of various lengths and diameters were tested. As the size of the rod specimen is reduced, the fatigue crack growth rate tends to increase when correlated using the stress intensity factor range. This increase is explained largely by the decrease in the degree of premature crack closure in the small specimens. Valid fatigue crack growth data can be obtained among the specimens examined except on the crack growth on the surface of the smallest specimen, which has a length of 26 mm and diameter of 8 mm. Even so, valid data can still be elucidated on the latter specimen if the interior growth is considered. The dimensions of the latter specimen allow fatigue properties to be evaluated using broken remnants from impact or other test specimens.     

生态型护岸在管道水工保护中的应用

长输管道穿越河流后,针对河流岸堤的恢复,传统施工工艺多采用浆砌块石或混凝土等硬质材料,与原河道堤岸不和谐,破坏了自然河流的生物链,而生态型护岸既可防止水土流失,又可满足生态环境要求,是管道施工大开挖穿越河流后堤岸恢复的好方法.文章结合泰国Wang Noi Kaeng Khoi天然气管道项目,介绍了生态型护岸技术的特点、施工工艺及实施效果.     

利用Hilbert-Huang变换提取地震信号瞬时参数

 通过Hilbert变换求取的信号瞬时参数并非对任何信号都有物理意义，此法通常要求被分析信号是窄带或平稳的，而且对噪声很敏感。而实际地震信号既非平稳又含有噪声，若在实际应用中不加考虑地对地震信号进行Hilbert变换以求取瞬时参数，这种情况下求取的瞬时参数将缺乏物理意义甚至失真。Hilbert-Huang变换是一种新的分析非平稳非线性信号的方法，它先将信号进行经验模态分解（EMD），形成有限个固有模态函数（IMF）之和，再对固有模态函数作Hilbert变换求取时频谱，求取的时频谱在时域和频域都具有较高的分辨率。本文将Hilbert-Huang变换应用于地震瞬时参数的提取，实例表明，对地震剖面做EMD可以得到不同时间尺度上的特征，Hilbert谱比传统的时频谱在时间和频率域上的分辨率都要高，强反射层在第1阶IMF瞬时频率剖面上比原瞬时频率剖面上表现得更为明显。     

计算机设备管理系统的设计和实现

文章介绍了已在中国建设银行推广应用的计算机设备管理系统的设计与实现。