浅析硫与玻璃生产

硫对玻璃生产有重要的影响,它不但可以起到一定的助熔作用,而且可以排除玻璃中的微气泡,提高玻璃的质量,但硫同时也会侵蚀熔窑、污染锡槽。本文总结充分利用硫的有利一面、尽可能消除不利一面的途径,使硫的有利一面更好地为玻璃生产服务。     

超支化聚酯的合成及光固化性能研究

通过甲基四氢苯酐和环氧丙醇的开环聚合反应，一步法制备超支化聚酯，聚酯的数均摩尔质量为1450～2600g／mol，支化度在0．41～0．71之间。用甲基丙烯酸缩水甘油酯改性，合成了UV固化超支化聚酯，并对其光固化性能进行了初步研究，发现超支化聚酯能有效降低固化膜的线收缩率，聚酯的官能度越高，固化膜的硬度越大，固化速度越快，在约1s的固化时问内凝胶率超过75％。     

中国古代陶瓷雕塑的美学特征

中华民族是个古老的、有着悠久历史和灿烂文明的伟大民族,远在八千年前,中国的文明在世界就已初露曙光。漫步在漫长的历史长河边,流连于丰富的博物馆展厅里,对我国悠久的历史和灿烂的文明作一次美的巡礼该是使人感到无比的欣慰和自豪的了。美学特征乃艺术的属性,总结它不是为了停留于前人的成果上,而是为了新的创造和新的开拓。     

Sliding mode control design via piecewise smooth Lipschitz surfaces based on contingent cone criteria

In order to improve flexibility of sliding mode control (SMC) for a class of nonlinear systems, a new control design method is proposed in this paper. The sliding surface is extended to be a generic Lipschitz continuous surface instead of a smooth one, with which different characteristics of sliding motion may be realized. Due to the nonsmoothness of the sliding surface, the control design problem is discussed in the framework of Filippov’s differential inclusion, by analyzing the geometric properties of the nonsmooth surface. Discontinuous control laws are presented based on new contingent cone criteria, which steer all of the trajectories of the closed-loop system to reach the piecewise smooth sliding surface in finite time.     

When smart grid meets PHEVs: a smart load distribution mechanism in smart grid

Along with the increasing popularity of electric vehicles caused by economic and environmental incentives, the penetration of plug-in hybrid electric vehicles (PHEVs) poses a great threat to the power grid, especially to the aggregated load in the power system. Motivated by this observation, in this paper, we analyze the impact of large-scale usage of PHEVs and address the load distribution problem by solving a decentralized optimization problem and smoothening the peak load with pricing strategies in the power grid. We also investigate the influence of charging time and charging mode on load distribution, as the charging price varies with the changes of these two factors. Our simulation study on PJM’s data warehouse shows that the proposed strategies can well smooth the peak load by pricing on the charging time and mode. The results also indicate that our strategies always distribute the load in a smoother manner at a smaller load fluctuation compared with other schemes (e.g., First Come First Service and PMCS) and thus improving the stability and reliability of the power grid.     

微波烧结Al2O3-TiC复合材料的研究

以纳米级TiC、Al2 O3 为原料 ,用微波烧结制备Al2 O3 -TiC复合材料 ,并与常规烧结比较。分析了两种烧结方法对制备试样的力学性能的影响 ,并探讨了添加剂对Al2 O3 -TiC复合材料烧结性能的影响     

Oligomer-Rich Fraction from Polydisperse Sample of Poly(bis(β-phenoxyethoxy)phosphazene)

Poly[bis(-phenoxyethoxy)phosphazene] [PBPEP] had been shown in our previous paper to be a very useful polymer for investigating the crystallization mechanism of polymers, as the crystallization rate of PBPEP is extraordinarily small when isothermally crystallized from the melt. The crystallization of the low molecular weight oligomers of PBPEP was first studied in comparison to the high molecular weight polymers. The oligomer-rich fraction was obtained by fractionation of the as-polymerized sample, which had a broad molecular weight distribution. The fractions thus obtained were characterized by solution viscometry and size exclusion chromatography. The melting temperature and the growth rate of the spherulite from the melt were investigated by differential scanning calorimetry and optical microscopy. The growth rate was one or two orders of magnitude smaller in the oligomer-rich fraction than in the other high molecular weight fractions. A collapsed spherulite appeared in the oligomer-rich fraction at high crystallization temperatures. It is speculated that in the oligomer-rich fraction there is an excess free energy due to defects in the crystal phase. This defect is considerably larger in the oligomer-rich fraction than in the other fractions because a large quantity of short length chains is present.     

一种快速的判别公共向量分类方法

在传统DCV的基础上,提出了一种改进的快速DCV分类方法。该方法与传统的DCV分类方法相比,在保证识别率相同的情况下具有较快的分类速率。传统的DCV分类方法通过计算特征向量之间的距离来进行分类,而所提快速DCV分类方法则通过标量计算完成分类。理论分析及复杂度计算表明,快速DCV分类方法的分类速率是传统DCV分类方法的2倍左右,在Yale、ORL和PIE 3种人脸数据库得到的对比仿真实验结果验证了该算法的有效性。     

改进贝叶斯分类的智能短信分类方法

随着移动通信技术的不断发展,手机的普及率在不断上升,而短信作为传统的移动通信服务,长久以来一直在人们的日常生活中占据着极为重要的位置。可以说,短信在一定程度上记录了人们生活的轨迹。但是,现有的短信管理系统仅对短信进行以联系人为特征分类、以时间为顺序显示的简单非智能化的管理,导致了用户手机中各类短信混杂不清,短信的管理效率极低。通过研究短信的特征,分析传统的基于文档频率的特征值提取方法和基于互信息的特征值提取方法的优势与不足,提出了一种适用于短信的基于词频和互信息的特征值提取方法,并结合短信长度实现了一种改进的贝叶斯分类算法。实验证明,算法在进行短信分类时可以得到相当可观的召回率和准确率。