三弧段型面联接的数控加工

论述了三弧段型面曲线的形成及其曲线参数方程,编制了三弧段型面的数控加工宏程序,适用于各种不同参数的三弧段型面的加工,且能够满足加工精度的要求。     

A survey of efficiency-estimation methods for in-service induction motors

Condition monitoring of electric motors avoids severe economical losses resulting from unexpected motor failures and greatly improves the system reliability and maintainability. Efficiency estimation, which shares many common requirements with condition monitoring in terms of data collections, is expected to be implemented in an integrated product. This brings more considerations into the selection of the efficiency-estimation methods. This paper presents the results of an up-to-date literature survey on efficiency-estimation methods of in-service motors, particularly with considerations of the motor-condition-monitoring requirements. More than 20 of the most commonly used methods are briefly described and classified into nine categories according to their physical properties. Six categories of these methods are more related to in-service testing and are compared in a table summarizing the required tests and measurements, intrusion level, and average accuracy. Estimation of the rotor speed and the stator resistance, the two stumbling blocks of various efficiency-estimation methods, is also carefully studied; commonly used methods are summarized. Based on the survey results, four efficiency-estimation methods are suggested as candidates for nonintrusive in-service motor-efficiency estimation and condition-monitoring applications. Another contribution of this paper is that a general approach for developing nonintrusive motor-efficiency-estimation methods is proposed, incorporating rotor speed, stator resistance, and no-load loss estimations.     

运用MapX的显控台设计与实现

在分析显控台功能需求的基础上，提出了一种基于MapX的显控台实现方法．该方法能较好地实现地图显示功能、目标航迹显示和人机交互界面的显示．该显控台具有结构简单，功能强大，运行效率高等特点，较好地满足了指挥自动化系统显控台的功能需求．     

双馈发电系统中电网侧高频整流器的研制

基于三相PWM高频整流器的数学模型,详细分析了双馈发电系统中电网侧整流器的双闭环控制原理和单位功率因数的实现方法。在此基础上设计了一套整流装置,可以单位功率因数运行在整流和逆变状态下,能够实现能量的双向流动,实验结果表明该整流装置具有良好的动、静态特性。     

DWDM上25.344 Mbit/s光监控信息传送系统的设计

采用25.344 Mbit/s光监控信息传送技术可以更好地满足当前密集波分复用(DWDM)系统中不断增加的网络监控信息和附加业务的需要.文章首先介绍了25.344 Mbit/s光监控信息传送系统的技术方案,然后详细描述了其帧结构、码型设计以及硬件实现的框图,最后介绍了该技术的优点.     

铝电解阴极用TiB2涂层的研究现状

简要介绍了我国铝电解工业的发展现状,指出了我国预焙铝电解槽寿命短的弊端;并分析了电解槽早期破损的原因和采用TiB2阴极涂层技术提高电解槽寿命的机理;叙述了新一代常温固化TiB2阴极涂层的特点,并强调应用新一代常温固化TiB2阴极涂层技术,提高电解槽寿命,是符合我国国情且行之有效的措施。     

冷镦钢新型脱氧剂的试验研究

采用新型复合脱氧剂和脱氧工艺对冷镦钢进行工业性试验研究，研究结果表明：冷镦钢采用AlMg合金脱氧获得了良好的脱氧效果，可以避免形成大型夹杂物，提高钢水纯净度。     

制氧机闲置的氪、氙回收设备的恢复利用

将三套全提取空气分离设备的氪氙系统进行组合,实现互联、互替,从而解决了其中一套氪氙系统设备因缺陷而不能生产的问题。     

大机组调峰对锅炉运行的影响及运行优化研究

利用炉膛断面温度场可视化监测系统、节能环保车、炉内三维数值模拟等先进的技术和设备对大机组调峰稳定性和运行方式优化进行试验和理论研究。     

100吨电炉自动控制系统设计及改进

本文介绍了安钢100吨电炉两级自动控制系统的设计方案，详细阐述了一级、二级自动控制系统的配置和功能，对于系统运行中出现的问题，提出了改进方案。