原位插层聚合法制备聚苯乙烯/海泡石纳米复合材料

采用十八烷基三甲基氯化铵(OTAC)作为有机插层剂对海泡石进行了有机化处理,该有机化的海泡石粒子在苯乙烯单体中很容易地均匀分散并形成稳定的胶体溶液.通过对分散有海泡石的苯乙烯进行原位插层聚合制备了聚苯乙烯/海泡石纳米复合材料.并用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、扫描电镜(SEM)和透射电镜(TEM)对聚苯乙烯/海泡石复合材料的结构进行了表征.研究表明聚苯乙烯的大分子链插入到海泡石片层间,形成了部分插层、部分剥离型纳米复合材料.     

Rapid growth of angle-confined large-domain graphene bicrystals

In the chemical vapor deposition growth of large-area graphene polycrystalline thin films,the coalescence of randomly oriented graphene domains results in a high density of uncertain grain boundaries (GBs).The structures and properties of various GBs are highly dependent on the misorientation angles between the graphene domains,which can significantly affect the performance of the graphene films and impede their industrial applications.Graphene bicrystals with a specific type of GB can be synthesized via the controllable growth of graphene domains with a predefined lattice orientation.Although the bicrystal has been widely investigated for traditional bulk materials,no successful synthesis strategy has been presented for growing two-dimensional graphene bicrystals.In this study, we demonstrate a simple approach for growing well-aligned large-domain graphene bicrystals with a confined tilt angle of 30° on a facilely recrystallized single-crystal Cu (100) substrate.Control of the density of the GBs with a misorientation angle of 30° was realized via the controllable rapid growth of subcentimeter graphene domains with the assistance of a cooperative catalytic surface-passivation treatment.The large-area production of graphene bicrystals consisting of the sole specific GBs with a tunable density provides a new material platform for fundamental studies and practical applications.     

大直径PPS/PA6共混单丝的结构与性能研究

采用PPS/PA6共混的方法来改进大直径PPS单丝的力学性能.探讨了共混体系的结构对共混单丝力学性能的影响,并与相关聚合物单丝进行了对比分析,同时研究了共混单丝的耐酸碱性能.结果表明:PA6的加入能有效地改善PPS单丝的力学性能,提高了单丝的拉伸强度和勾结强度,增加了PPS单丝的韧性.同时,PPS/PA6共混单丝能保持...     

Growth and characterization of Pb0.97La0.02(Zr0.66Sn0.27Ti0.07)O3 antiferroelectric single crystals

Single crystals of Pb_0.97La_0.02(Zr_0.66Sn_0.27Ti_0.07)O₃ (PLZST) with the composition near the morphotropic phase boundary were grown by the flux method. The PbO–PbF₂–B₂O₃ system was used as a solvent. PLZST single crystals with the size of 4–6 mm are obtained and these crystals are slightly translucent after polishing. The splitting of (200) reflection peak indicates that the obtained crystals are of a single phase with tetragonal perovskite structure. The element contents of the grown crystals were measured by inductively coupled plasma atomic emission spectrometry. The chemical composition of the crystals is Pb_0.979La_0.014(Zr_0.666Sn_0.285Ti_0.049)O₃. Thermal properties and dielectric properties of PLZST single crystals were studied. The results show that flux-grown PLZST single crystals exhibit obvious endothermic processes and relaxor behaviors near the phase transition temperatures.     

壳聚糖负载稀土化合物催化环氧乙烷与环氧丙烷共聚合反应研究

研究以壳聚糖(Cs)作为高分子金属催化剂载体,制得负载稀土金属化合物的高分子金属催化剂,应用于环氧乙烷(BO)和环氧丙烷(PO)的共聚合反应.研究发现以三异丁基铝(Al(i-Bu)3)为助催化剂,乙酰丙酮(Acac)为第三组分时,该体系的催化活性高达192 kg*copolymer/mol*Y,比非负载型稀土催化体系活性提高1个数量级以上.环氧乙烷和环氧丙烷的竞聚率r 1(EO)、r 2(PO)分别为2.75±0.02和0.55±0.01;并用13C-NMR谱和DSC谱对共聚物结构进行了表征.     

加氢装置加热炉易爆管部位的分析

重点介绍韩国蔚山炼油厂分馏塔底重沸炉火灾事故、中国石油化工股份有限公司洛阳分公司催化裂化柴油加氢装置反应进料加热炉火灾事故、茂名分公司渣油加氢脱硫装置分馏炉火灾事故、镇海炼油化工股份有限公司加氢裂化装置脱丁烷塔底重沸炉火灾事故的情况,找出加氢装置加热炉的易爆管部位,并通过分析总结,提出了易爆管部位的选材原则、设计改进方案及维护措施.     

Myoglobin/gold nanoparticles/carbon spheres 3-D architecture for the fabrication of a novel biosensor

A novel biosensor based on a myoglobin/gold nanoparticles/carbon spheres (Mb-AuNPs-CNs) 3-D architecture bioconjunction has been fabricated for the determination of hydrogen peroxide (H₂O₂). Cyclic voltammetry (CV), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to characterize the bioconjunction of the AuNPs-CNs with Mb. Experimental results demonstrate that the AuNPs-CNs hybrid material is more effective in facilitating electron transfer of the immobilized enzyme than CNs alone, which can be attributed to the unique nanostructure and larger surface area of the bioconjunction. The biosensor displayed good performance for the detection of H₂O₂ with a wide linear range from 0.28 μmol/L to 116.5 μmol/L and a detection limit of 0.12 μmol/L. The Michaelis-Menten constant K _M^app value was estimated to be 0.3 mmol/L. The resulting biosensor exhibited fast amperometric response, and good stability, reproducibility, and selectivity to H₂O₂. This article is published with open access at Springerlink.com     

人工水晶的压痕断裂行为及其 K_(1c)测量

藉助于声发射技术,研究了在 Vickers 钻石压头作用下人工水晶的压痕断裂行为。压头对角线与晶体试样的相对取向是,使得水晶Ⅰ和水晶Ⅱ的压痕诱发径向/中位断裂,分别沿着(10(?)0)/(1(?)10)和(11(?)0/(1(?)00)晶面对发展。压痕断裂过程中的声发射特征表明,除了随着压痕特征参数的发展所引起的准静态—声发射外,有三个相互独立的,与径向/中位裂纹的成核、径向/中位裂纹突入试样表面、以及裂纹分岔或侧向裂纹萌生等过程相关的声发射效应。以 Vickers 压痕技术测得 K_(c2)的结果与以一般力学法及 Knoop 压痕技术的测试结果作了比较。断裂韧性与晶体学取向的关系亦作了分析。实验表明,水晶Ⅰ和水晶Ⅱ具有相同的 K_(1c)值。其原因是,两种试样的径向/中位裂纹实际上沿着同样的{1100}/{1120}晶面对扩展。至于从缺口梁法或 Knoop 压痕技术得到的 K_(1c)值,由于水晶Ⅰ和水晶Ⅱ的主裂纹分别沿着(1(?)10)和(1(?)00)晶面扩展;它们的 K_(1c)值与断裂能随着晶体学取向而变有关,因而也就各不相同。     

热声系统内交变流动特性的数值模拟

对热声系统中交变流动的声场与流场分布进行了数值模拟,得到了热声谐振管和回热器(板叠)内的压力和速度分布及二者之间的相位关系.数值模拟表明:在谐振管内,在模拟的边界条件下,径向速度分布出现"环形效应",流动分为核心区的完全湍流流动和湍流边界层内的粘性流动;对于水力半径和粘性渗透层深度相当的热声板叠,其内速度分布逐步出现"环形效应",流动介于层流和湍流的过渡区,为过渡态流动,在流道的大部分区域压力和速度振荡的相位差趋向于π/2;对于水力半径和粘性渗透层深度之比较小的热声回热器,其内交变流动的流动特性与稳态流动的相似,速度的径向分布为抛物线形,类似于定常流动的层流速度分布.     

浙江省硫酸工业进展

介绍近6年来浙江省的硫酸产能和产量及下游耗酸产业结构.浙江省2005年硫酸产量占全国总产量的3%,预计2006年产量将达到1 600 kt.建议缓建硫酸装置,积极发展耗酸行业,控制进口酸量,加强企业间的协调,以使浙江省的硫酸市场在新的供需形势下建立起新的平衡.