废电子电气产品塑料可持续再生过程中的能量回收(上)

故障现象：制冷正常，但制热时烧熔丝。分析与检测：该空调安装好后，试机时只试了制冷状态，制冷工作正常，却未进行制热试机。后来用户想试一下制热，拨到制热挡，熔断器一开机就跳闸，等合上闸后整机就无任何反应了。最初分析也许是巧合，检查主控板上的熔丝已经烧了，随即更换上了一块线路板，试机制冷正常，但在制热状态立刻烧熔断，判断制热存在严重短路现象。即然制冷正常，制热状态只多一个四通阀线圈用电，检查室外机的接线，原来是安装工错将三跟导线中的黄线接到了地上。     

Electrical characteristics of high dielectric constant BCTZ thin films

Abstract

High dielectric constant Ba_0.96Ca_0.04Ti_0.84Zr_0.16O₃ (BCTZ) thin films were deposited on Pt/Ti/SiO₂/Si substrates by spin on metal-organic decomposition (MOD) technique. Undoped and 0.4% Mg-doped BCTZ thin films were annealed in the temperature range from 600 to 900 °C for 1 hour in oxygen environment. The crystal structure of BCTZ thin films was analyzed by X-ray diffraction. The electrical properties of BCTZ thin films were investigated by capacitance—voltage (C—V) characteristics. Also, the electrical properties of these films were compared in conjunction with 0.4% Mg doping effect of BCTZ thin films for possible high dielectric constant material applications.     

Metabolomic Profiling of Plasma from Melioidosis Patients Using UHPLC-QTOF MS Reveals Novel Biomarkers for Diagnosis

To identify potential biomarkers for improving diagnosis of melioidosis, we compared plasma metabolome profiles of melioidosis patients compared to patients with other bacteremia and controls without active infection, using ultra-high-performance liquid chromatography-electrospray ionization-quadruple time-of-flight mass spectrometry. Principal component analysis (PCA) showed that the metabolomic profiles of melioidosis patients are distinguishable from bacteremia patients and controls. Using multivariate and univariate analysis, 12 significant metabolites from four lipid classes, acylcarnitine (n = 6), lysophosphatidylethanolamine (LysoPE) (n = 3), sphingomyelins (SM) (n = 2) and phosphatidylcholine (PC) (n = 1), with significantly higher levels in melioidosis patients than bacteremia patients and controls, were identified. Ten of the 12 metabolites showed area-under-receiver operating characteristic curve (AUC) >0.80 when compared both between melioidosis and bacteremia patients, and between melioidosis patients and controls. SM(d18:2/16:0) possessed the largest AUC when compared, both between melioidosis and bacteremia patients (AUC 0.998, sensitivity 100% and specificity 91.7%), and between melioidosis patients and controls (AUC 1.000, sensitivity 96.7% and specificity 100%). Our results indicate that metabolome profiling might serve as a promising approach for diagnosis of melioidosis using patient plasma, with SM(d18:2/16:0) representing a potential biomarker. Since the 12 metabolites were related to various pathways for energy and lipid metabolism, further studies may reveal their possible role in the pathogenesis and host response in melioidosis.     

Hardware architecture of the Protein Processing Associative Memory and the effects of dimensionality and quantisation on performance

The Protein Processor Associative Memory (PPAM) is a novel hardware architecture for a distributed, decentralised, robust and scalable, bidirectional, hetero-associative memory, that can adapt online to changes in the training data. The PPAM uses the location of data in memory to identify relationships and is therefore fundamentally different from traditional processing methods that tend to use arithmetic operations to perform computation. This paper presents the hardware architecture and details a sample digital logic implementation with an analysis of the implications of using existing techniques for such hardware architectures. It also presents the results of implementing the PPAM for a robotic application that involves learning the forward and inverse kinematics. The results show that, contrary to most other techniques, the PPAM benefits from higher dimensionality of data, and that quantisation intervals are crucial to the performance of the PPAM.     

Tissue-level segmentation and tracking of cells in growing plant roots

With the spread of systems approaches to biological research, there is increasing demand for methods and tools capable of extracting quantitative measurements of biological samples from individual and time-based sequences of microscope images. To this end, we have developed a software tool for tissue level segmentation and automatic tracking of a network of cells in confocal images of the roots of the model plant Arabidopsis thaliana. The tool implements a novel hybrid technique, which is a combination of the recently developed Network Snakes technique and MCMC-based particle filters and incorporates automatic initialisation of the network snakes. A novel method of evaluation of network-structured multi-target tracking is also presented, and is used to evaluate the developed tracking framework for accuracy and robustness against several timelapse sequences of Arabidopsis roots. Evaluation results are presented, along with a comparison between the results of the component techniques and the hybrid approach. The results show that the hybrid approach performed consistently well at all levels of complexity and better than the component methods alone.     

The Multi-Mode Resource-Constrained Multi-Project Scheduling Problem

Scheduling projects is a difficult and time consuming process, and has far-reaching implications for any organization’s operations. By generalizing various aspects of project scheduling, decision makers are enabled to capture reality and act accordingly. In the context of the MISTA 2013 conference, the first MISTA challenge, organized by the authors, introduced such a general problem model: the Multi-Mode Resource-Constrained Multi-Project Scheduling Problem (MRCMPSP). The present paper reports on the competition and provides a discussion on its results. Furthermore, it provides an analysis of the submitted algorithms, and a study of their common elements. By making all benchmark datasets and results publicly available, further research on the MRCMPSP is stimulated.     

Thin‐film encapsulated white organic light top‐emitting diodes using a WO3/Ag/WO3 cathode to enhance light out‐coupling

An alternative design of a semitransparent cathode for top‐emission white‐fluorescent organic light‐emitting diodes (OLEDs) has been investigated. The scope of this study was to improve the luminance of OLEDs used for displays while keeping the current density versus voltage characteristic unchanged for addressing purposes. The use of an optical simulation tool allowed the optimization of the tri‐layer cathode WO₃/Ag/WO₃ to increase the light out‐coupling coefficient of the device leading to an increased white emission compared with a reference device with a Ca/Ag cathode. An increase of ~40% in luminance has been calculated by simulation and experimentally confirmed. The p‐i‐n OLED structure underneath the tri‐layer cathode allowed an efficient injection of electrons independently from the work function of WO₃. The WO₃/Ag/WO₃ cathode has been also confirmed to be compatible with the atomic layer deposition technique for thin film encapsulation. Finally, lifetime measurements up to 600 h have been carried out to quantify the enhancements induced by the new cathode compared with the control device. It has been found that lifetimes of both cathode architectures are similar on this time scale, while the WO₃/Ag/WO₃ cathode shows a lower voltage drift versus aging.     

Visual tracking for the recovery of multiple interacting plant root systems from X-ray $$\upmu $$CT images

We propose a visual object tracking framework for the extraction of multiple interacting plant root systems from three-dimensional X-ray micro computed tomography images of plants grown in soil. Our method is based on a level set framework guided by a greyscale intensity distribution model to identify object boundaries in image cross-sections. Root objects are followed through the data volume, while updating the tracker’s appearance models to adapt to changing intensity values. In the presence of multiple root systems, multiple trackers can be used, but need to distinguish target objects from one another in order to correctly associate roots with their originating plants. Since root objects are expected to exhibit similar greyscale intensity distributions, shape information is used to constrain the evolving level set interfaces in order to lock trackers to their correct targets. The proposed method is tested on root systems of wheat plants grown in soil.