New type of tin support for hydroprocessing catalyst

TiN supported molybdenum sulfide catalysts showed much higher activity for cleavage of C-C bonds than oxide supported molybdenum sulfide catalysts, indicating the possibility of a new generation of supports for hydroprocessing catalysts.     

Effect of MgO Addition on the Bondability and Interfacial Reaction between Dielectric and Glass-Ceramics for the Fabrication of Multi-Component Ceramic Substrates

Bondability and interfacial reaction between dielectric and insulator layers have been examined to obtain a basic understanding of bonding mechanisms. Lead-containing complex perovskite was used as a dielectric material. Two kinds of glass-ceramics were used as insulator material; lead borosilicate glass containing Al_2O3 (insulator A) and the same containing Al₂O₃ and M_gO (insulator B). Dielectric and insulator layers did not bond when insulator A was used. When insulator B was used, however, strong bonding was achieved between the two layers by firing the powder compacts at temperatures between 800° and 1000°C. Addition of M_gO to lead borosilicate glass increased the thermal expansion coefficient to that of the dielectric and enhanced the formation of reaction layers, resulting in good bonding. Two reaction layers were identified. The main reaction products were enstatite and bredigite for one layer contacting the dielectric, and enstatite and a compound with the same diffraction pattern as that of faujasite for the other layers contacting insulator B.     

Development of flexible organic light‐emitting diode on barrier film and roll‐to‐roll manufacturing

To come out with a successful organic light‐emitting diode (OLED) lighting business, it is very important to have clear differentiation of OLED from LEDs. Flexible OLED has merits, such as capability to be mounted on the curved wall, which is not easy for LEDs to achieve the feature. There are several approaches to make flexible OLEDs especially among those plastic barrier films that can bring high level of flexibility, which could not be achieved by any conventional lighting method. In this paper, barrier films with various water vapor transmission rate values, including 10^{? 6} order, are applied, and the conditions to have almost no dark spot growth under 85 °C and 85% high temperature/humidity test are shown. Flexible OLED panels are manufactured with the world's first roll‐to‐roll equipment using plastic barrier film.     

On-chip fabrication of magnetic alginate hydrogel microfibers by multilayered pneumatic microvalves

Alginate hydrogel has widespread applications in tissue engineering, cancer therapy, wound management and drug/cell/growth factor delivery due to its biocompatibility, hydrated environment and desirable viscoelastic properties. However, the lack of controllability is still an obstacle for utilizing it in the fabrication of 3D tissue constructs and accurate targeting in mass delivery. Here, we proposed a new method for achieving magnetic alginate hydrogel microfibers by dispersing magnetic nanoparticles in alginate solution and solidifying the magnetic alginate into hydrogel fiber inside microfluidic devices. The microfluidic devices have multilayered pneumatic microvalves with hemicylindrical channels to fully stop the fluids. In the experiments, the magnetic nanoparticles and the alginate solution were mixed and formed a uniform suspension. No aggregation of magnetic nanoparticles was found, which is crucial for flow control inside microfluidic devices. By regulating the flow rates of different solutions with the microvalves inside the microfluidic device, magnetic hydrogel fibers and nonmagnetic hydrogel fibers were fabricated with controlled sizes. The proposed method for fabricating magnetic hydrogel fiber holds great potential for engineering 3D tissue constructs with complex architectures and active drug release.     

Copolymerization of phenylacetylene with various acetylenes by W- and Mo-based catalysts

In the copolymerization of phenylacetylene with various acetylenes catalysed by WCl₆·Ph₄Sn, the relative reactivity of monomer decreased with increasing steric effect of monomer, e.g. HC  Cn-Bu, HC  Cn-Hex > HC  CPh, HC  Cs-Bu > HC  Ct-Bu, MeCCPh, CICCPh. While 1-chloro-2-phenylacetylene (a disubstituted acetylene) showed high reactivity in the homopolymerization by Mobased catalysts, the reactivity was remarkably depressed in the presence of phenylacetylene as comonomer. Based on these results, the relative reactivity of the acetylenic monomers in copolymerization was explained in terms of competitive coordination of monomers to the propagating end.     

Effect of EFA deficiency on lipid transport from liver

Studies are reported of the effect of an essential fatty acid (EFA) deficiency on synthesis of triglycerides (TG) and phospholipids (PL) and secretion of these compounds by livers of male Sprague-Dawley rats. Animals were fed a semipurified diet containing corn oil or hydrogenated coconut oil (HCO) as the sole source of fat or no fat from weaning to 20 weeks of age. Liver function of the animals in each group was compared by an isolated liver perfusion technique with perfusates containing erythrocytes and linoleate, and in vivo experiments via tail vein injection of palmitate-³H. Perfusion experiments showed that an EFA deficiency reduced the ability of the liver to secrete TG and PL. Accumulation of TG in the liver and its diminished secretion into the blood of EFA deficient animals were demonstrated by in vivo experiments with palmitate-³H. The rate of conversion of linoleate to arachidonate and synthesis of PL was greater in livers of EFA deficient rats than in the control, corn oil fed animals. The results suggest a relationship of EFA metabolism to lipid transport. One of five papers to be published from the Symposium “Lipid Transport” presented at the AOCS Meeting, New Orleans, April 1970.     

Surface-Chemical Criteria for Optimum Adhesion

According to Bikerman, who attributes failure in adhints to a weak boundary layer, it is almost impossible and meaningless to correlate adhesive strength to surface-chemical properties of adhints. Though his assertion seems to be confirmed by the recent studies of Schonhorn and his coworkers on the methods of CASING and TCR, not a few results have yet been accumulated, which show a close relation between them. In this paper surface-chemical criteria for the optimum adhesion are investigated and the minimum interfacial tension or the maximum wetting pressure is deduced from the published data and our own as a first approximation. It is emphasized that, when critical surface tension γ_c would be used as a measure of surface-chemical properties of solid, its variability according to liquid series (nonpolar, polar and hydrogen bonding liquids) should be carefully taken into consideration. The importance is shown for polyethylene and its fluorine substituted polymers, using newly measured contact angle data and Zisman's data. Results of Levine et al. and Schonhorn et al. on adhesive shear strength with epoxy adhesives are replotted against available values of γ_c obtained by the use of hydrogen bonding liquid (γ_c^c), which are thought to reflect wetting behaviors of epoxy adhesives quite well. Each curve shows a maximum around γ_c^c = 40 dyne/cm with few points falling off the curves.     

DSC and TMDSC study of melting behaviour of poly(butylene succinate) and poly(ethylene succinate)

The subsequent melting behaviour of poly(butylene succinate) (PBSU) and poly(ethylene succinate) (PES) was investigated using DSC and temperature modulated DSC (TMDSC) after they finished nonisothermal crystallization from the melt. PBSU exhibited two melting endotherms in the DSC traces upon heating to the melt, which was ascribed to the melting and recrystallization mechanism. However, one melting endotherm with one shoulder and one crystallization exotherm just prior to the melting endotherm were found for PES. The crystallization exotherm was ascribed to the recrystallization of the melt of the crystallites with low thermal stability, and the shoulder was considered to be the melting endotherm of the crystallites with high thermal stability. The final melting endotherm was ascribed to the melting of the crystallites formed through the reorganization of the crystallites with high thermal stability during the DSC heating process. TMDSC experiments gave the direct evidences to support the proposed models to explain the melting behaviour of PBSU and PES crystallized nonisothermally from the melt.     

Potential bile acid metabolites. 24. An efficient synthesis of carboxyl-linked glucosides and their chemical properties

A facile and efficient synthesis of the carboxyl-linked glucosides of bile acids is described. Direct esterification of unprotected bile acids with 2,3,4,6-tetra-O-benzyl-d-glucopyranose in pyridine in the presence of 2-chloro-1,3,5-trinitrobenzene as a coupling agent afforded a mixture of the α- and β-anomers (ca. 1∶3) of the 1-O-acyl-d-glucoside benzyl ethers of bile acids, which was separated effectively on a C₁₈ reversedphase chromatography column (isolated yields of α- and β-anomers are 4–9% and 12–19%, respectively). Subsequent hydrogenolysis of the α- and β-acyl glucoside benzyl ethers on a 10% Pd−C catalyst in acetic acid/methanol/EtOAc (1∶2∶2, by vol) at 35°C under atmospheric pressure gave the corresponding free esters in good yields (79–89%). Chemical specificities such as facile hydrolysis and transesterification of the acyl glucosides in various solvents were also discussed.     

Fabrication of Transparent, Sintered Sc2O3 Ceramics

We report here the fabrication of transparent Sc₂O₃ ceramics via vacuum sintering. The starting Sc₂O₃ powders are pyrolyzed from a basic sulfate precursor (Sc(OH)_2.6(SO₄)_0.2·H₂O) precipitated from scandium sulfate solution with hexamethylenetetramine as the precipitant. Thermal decomposition behavior of the precursor is studied via differential thermal analysis/thermogravimetry, Fourier transform infrared spectroscopy, X-ray diffractometry, and elemental analysis. Sinterability of the Sc₂O₃ powders is studied via dilatometry. Microstructure evolution of the ceramic during sintering is investigated via field emission scanning electron microscopy. The best calcination temperature for the precursor is 1100°C, at which the resultant Sc₂O₃ powder is ultrafine (∼85 nm), well dispersed, and almost free from residual sulfur contamination. With this reactive powder, transparent Sc₂O₃ ceramics having an average grain size of ∼9 μm and showing a visible wavelength transmittance of ∼60–62% (∼76% of that of Sc₂O₃ single crystal) have been fabricated via vacuum sintering at a relatively low temperature of 1700°C for 4 h.