β-Si3N4Whiskers Embedded in Oxynitride Glasses: Interfacial Microstructure

Interfacial microstructures in βP-Si₃N₄( w )-Si-Al-Y-O-N-glass systems were investigated by systematically varying the nitrogen content and the Al:Y ratio of the glass matrix. High-resolution and analytical transmission electron microscopy (HREM and AEM) studies revealed that the interfacial microstructure is a function of the glass composition. No interfacial phases were formed in glasses with low Al:Y ratios and in glasses with high Al:Y ratios and low nitrogen content, whereas epitaxial growth of an interfacial layer (100–200 μm thick) on the βP-Si₃N₄( w ) occurred in a glass matrix with high Al:Y ratio and high nitrogen content. The interfacial layer was identified to be a β'-SiAION phase. Interfaces containing the SiAION layer exhibited high debonding energy compared to Si₃N₄( w )–glass interfaces. HREM studies indicated that the lattice-mismatch strain in the SiAION layer was relieved by dislocation formation at the SiAION–Si₃N₄( w ) interface. The difference in interfacial debonding energy was, hence, attributed to the local atomic structure and bonding between the glass-β-Si₃N₄ and the glass–β'-SiAION phases. This observation was clear evidence of the strong influence of glass chemistry on the interfacial debonding behavior by altering the interfacial microstructure.     

Data collection: evaluation of a pilot model

The overall purpose of this study was to explore nurses' feelings about the applicability and adequacy of a pilot model of nursing assessment (PMNA) developed for coronary care units (CCU) in order to obtain data that could help in establishing a definitive model. The evaluation, performed by 11 CCU nurses, showed that they considered the development and implementation of PMNA as valuable, and that its design was adequate for interviewing cardiac patients. These results will be employed in the elaboration of a definitive model of nursing assessment.     

Consumption of reduced-fat products: effects on parameters of anti-oxidative capacity

Plasma levels of fibrinogen, factor VIIc and prothrombin fragment F1 + 2, a marker of thrombin generation in vivo, were studied in 68 subjects with serum total cholesterol (TC) levels between 135 and 349 mg/dl but without clinical evidence of cardiovascular disease and other atherosclerotic risk factors. F1 + 2 plasma levels were directly correlated with TC (p < 0.0004), low-density lipoprotein cholesterol (LDL-C; p < 0.0018) and factor VIIc (p < 0.024). Thirty-five subjects with TC greater than 249 mg/dl (median value of the whole group) showed higher levels of F1 + 2 (p < 0.0001) and fibrinogen (p < 0.0015) than those with TC lower than 249 mg/dl. In subjects with TC > 249 mg/dl and F1 + 2 > 1.2 nM (median value of the whole group), a cholesterol-lowering drug (simvastatin) was able to reduce F1 + 2 (p < 0.009) as well as TC and LDL-C. This study shows a relationship between serum cholesterol and the rate of thrombin generation supporting the hypothesis that a hypercoagulable state may occur in hypercholesterolemic subjects before the onset of clinical evidence of atherosclerotic cardiovascular disease.     

Non-contact handling in microassembly: Acoustical levitation

Microassembly is currently of the utmost importance in industry. Nevertheless, the classical assembly processes are no longer usable for very small components, typically ranging from 10  m to 10 mm, since usually neglected surface forces disturb the handling task by inducing adhesion between the component and the gripper. A promising alternative to tackle surface forces consists in levitating the handled component. The various advantages of this contactless handling method are reviewed here and justify the choice of this approach. Consequently, the numerous physical principles suitable for contactless handling are briefly described together with their limitations. The evaluation shows that acoustic levitation is best fitted in the case of microassembly. A classification of literature applications is presented hereafter with special focus on acoustic levitation. Finally, the most common models of acoustical levitation are inspected in a general way. The described models come within the scope of non-linear acoustics.     

Solution of temperature fields in hydrodynamics bearings by the numerical network method

Solution to the 2-D steady-state nonlinear heat conduction equation, involving cylindrical coordinates, applied to a plain bearing by a simple and versatile numerical technique based on network method is presented in this work. These advantages of the technique are necessary for the status evaluation of industrial machines during operation because time and computing resources are limited. The pressure field in the fluid is previously solved from the Reynolds equation by finite element method. The main difficulty is associated with the exponential dependency of the viscosity on temperature. The proposed model is very efficient and requires negligible computing times. Solutions are very close to the experimental and numerical results of other researchers.     

Analysis of electrocardiograms during atrial fibrillation

The research discussed in this article is motivated by the search for an optimal classification of the different types of atrial fibrillation (AF) on the basis of recorded atrial signals. This would facilitate the selection of an optimal therapy. This article focuses on the biophysical models of the genesis of ECG waveforms during AF. The model of the electric activity of the atria was found to have sufficient realism to be used to describe the electric sources during AF. The inclusion of the volume conduction model resulted in electrocardiographic signals that are in all aspects similar to those observed clinically. The model is currently applied to solve various problems related to optimal signal preprocessing and extraction of features in AF signals for the classification of AF abnormalities. The biophysical model of the atrial activity is an essential element in this research, since it is capable of describing the electric source specifications derived from different hypotheses relating to the etiology of AF