Experimental Study on Polymer Artificial Bone with HA Coated and Fiber Liners

1Introduction HA(hydroxyapatite)wasakindofbioactiveceram ics,whichhadexcellentbiocompatibilityandtissueaffin ityinthatitscomponentsweresimilartothoseofhuman bone[1].Soitwasthebestknownhumanbonesubstitute,andunprecedentedeffecthadbeenharvestedinrecenttwo d…     

一维ZnO纳米结构的电子场发射研究

在大量制备一维ZnO纳米结构的基础上,研究了这些纳米结构的场发射性能。对于四角状ZnO纳米结构,获得1.0m Ac/m2的电流密度只需要4.5V/μm的电场;对于线状Z nO纳米结构,获得1.0mAc/m 2的电流密度需要6.5V/μm的电场。由于其特殊的结构,四角状ZnO一维纳米结构在真空电子器件方面有很好的应用前景。     

新型超微晶软磁合金FePCCuMoSi微观结构缺陷的正电子湮没研究

用正电子湮没方法研究了新型超微晶软磁合金的微观结构缺陷，样品选用的是在不同温度下退火的Ｆｅ８１Ｐ１２Ｃ３Ｃｕ１Ｍｏ０．５Ｓｉ２．５合金，结果表明，合金的微观结构构陷大小，密度随退火温度有规律地变化，这种现象可能与非晶的晶化过程有关。     

硬件握手双向选通型串行通信共享器的设计

本文介绍了ＩＢＭ－ＰＣ系列计算机通过ＲＳ－２３２Ｃ串行口与多个单片微机组成的分布式系统中一种可双向选通串行通信共享器的设计方法。给出通信共享器的设计电路；并对电路工作原理进行了详细剖析。     

输气管道天然气连续取样器的研制及应用

文章针对国内管输天然气气质分析工作中取样环节所存在的问题，结合国外技术发展趋势，全面地介绍了输气管道天然气连续取样器的研制过程。实践证明，该装置较好地解决了天然气密度值偏差问题，满足管输天然气全分析的要求，同时，该装置的推广应用将会提高天然气的计量准确度。     

端羟基聚二甲基硅氧烯改性环氧树脂

用羟基封端的聚二甲基硅氧烷改性环氧树脂，得到具有两相结构的改性树脂，其耐热性明显提高．环氧树脂／有机硅（20／80）共混物涂层有很低的表面能，主要的机械性能则变化不大，可作为一种疏水性防护徐层．     

Synthesis and characterization of molybdenum disulphide formed from ammonium tetrathiomolybdate

An investigation has been carried out into the possibility of in situ formation of MoS2 within porous anodic films on aluminium, to improve subsequent tribological behaviour, by re-anodizing in thiomolybdate electrolyte. Acidification of thiomolybdate was employed to simulate the conditions for formation of the sulphide at the anodic film/electrolyte interface, followed by appropriate vacuum heat treatments to study possible temperature effects on the sulphide due to either friction or Joule heating during anodizing. The products of both acidification and heat treatment, characterized by X-ray powder diffraction and scanning electron microscopy, were compared with those formed by direct thermal decomposition of ammonium tetrathiomolybdate crystals. The precipitate formed by acidification was mainly amorphous molybdenum trisulphide (MoS3), which on heat treatment at 450 and 850°C yielded 3R-MoS2. 3R-MoS2 also formed by the thermal decomposition of thiomolybdate crystals. Thermogravimetric and differential thermal analyses showed that the decomposition of MoS3 to MoS2 occurred in the range 220–370°C and revealed the sequence of reaction steps. The findings suggest that mainly amorphous MoS3 is formed as a consequence of changes in the pH of the film/electrolyte interface during re-anodizing but the product is relatively easily transformed to crystalline MoS2 on moderate heating which may occur during wear processes.     

单分散六边形扁平溴碘化银微晶的结构与性能的研究

应用可控双注仪制备了一系列碘含量相同而碘在微晶中分布不同的单分散六边形扁平溴碘化银乳剂。用扫描电镜（ＳＴＥＭ）与Ｘ－射线能谱仪（ＥＤＳ）对单个微晶进行了微区分析，并用介电损耗，微波光导等方法研究了此类乳剂微晶的结构与性能的关系。结果表明：严格控制微晶成核、成熟、生长三个阶段的条件，可制得含六边形颗粒９２％以上的扁平溴碘化银乳剂，颗粒大小变化系数小于１２％。此外碘在微晶中的分布明显影响微晶的电性质和     

活塞综合检测仪的研制

介绍了活塞综合检测仪的功能、组成、检测过程、测量原理与方法和主要技术性能指标。该仪器是国内研制的第一台智能型活塞综合检测仪。实际应用表明,这是一台高精度、高稳定性和高效率的检测仪器。     

激光辐照制备搪瓷涂层

激光辐照制备的搪瓷涂层表面粗糙,与金属基材结合牢固。一般由 Si,Al,Na,K,B,F,O等元素组成。在激光辐照过程中 K,Na 明显地挥发,从而在涂层中的含量明显减少;Co,Ni,主要分布在界面附近;Fe 元素也由基材进入涂层,呈梯度状分布,在界面过渡区含量很高,在涂层内含量很低。搪瓷涂层的形成与激光辐照参数,特别与激光功率间存在极为密切的关系;只有选用合理的参数,才能制得搪瓷涂层。