高速并条机FA326的生产实践

介绍了FA326并条机的性能特点，并进行了纺纱工艺实践，认为FA326并条机能改善并条的条干不匀率、重量不匀率，提高半制品质量，可增加产品的市场竞争力。     

钛铁矿选择氯化法制取人造金红石的热力学与动力学

研究了钛铁矿选择氯化制取人造金红石反应的Fe-Ti-C-O2-Cl2系平衡图，计算了氧与某些氯化物相互作用的自由能变化，采用“通氧一步选择氯化法”，解决了选择氯化“自热”反应持续进行的技术关键，对反应参数进行了实验室，半工业和工业化生产试验研究，研究证明，选择氯化过程的动力学模型是“固体颗粒粒度保持不变的缩核反应模型”，动力学区的活性能为34．33kJ/mol；扩散区的活化能为0．80kJ/mol，研究开发的无筛板沸腾氯化炉可以长期稳定地连续运转，生产出的人造金红石品位为92．10％，经摇床和磁选，品位达到95％，床层单位炉产能达12．4t/(m2.d)，该工艺和设备已成功地应用于工业生产。     

光孤子源的研制

报道了利用增益开关分布反馈半导体激光器，Ｆ－Ｐ光学滤波器及掺饵光纤放大顺研制成光孤子源的研究工作。光孤子源性能稳定，输出的超短光脉冲重复频率为２．５ＧＨｚ脉宽２４，谱宽０．１４ｎｍ，时间带宽积０．４１９，平均输出光功率２．４ｍＷ。     

柔性轧制Q390C和Q420C钢板生产实践

目前市场对中厚板的订单具有个性化和多样化的特点，而对于不同强度级别的钢板，化学成分设计往往是不同的，这样会增加不同钢坯冶炼之间衔接的时间及化学成分控制的难度，导致冶炼成本增加，工序复杂化。结合市场需求与生产实际，采用同一Q390低合金高强度钢板坯，通过不同的控轧控冷工艺，对Q390C和Q420C两种强度级别热轧钢板进行了试制。结果表明，通过控轧控冷技术，可以充分发挥细晶强化作用，采用同一Q390低合金高强度钢板坯实现了Q390C和Q420C两个强度级别热轧钢板的柔性生产。试制生产的两种钢板，强塑性及0 ℃冲击功均满足标准要求，Q420C钢板屈服强度达441 MPa以上，抗拉强度达579 MPa以上。采用柔性轧制技术，降低了Q420C高强钢板的生产成本。     

Influence of Rare-earth Elements on Mechanical Properties of Palladium

The influence of 0.1-0.6 at.-%RE additions (RE= La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er, Yb) on themechanical properties of Pd was studied. All above RE additions increased not only the strengthproperties at ambient temperature but also the tensile strength, creep rupture time and activation en-ergy at high temperatures, simultaneously increased the elongation of Pd. In the range of dilute con-centration, the strength properties of Pd-RE alloy enhanced linearly with RE concentration. Whenthe strength properties of Pd-RE alloys were normalized at 0.1 at.-%RE, it was found that light REelements had stronger effect on the properties of Pd than heavy RE, whereas Eu, Yb, Ce had anoma-lous effect. In all Pd-RF alloys, Pd-Eu alloy had the highest strength properties, successively Pd-Yband Pd-Ce alloy. The effect mechanisms of RE in alloy, such as purifying impurities, increasingrecrystallization temperature, refining grain size. expanding crystal lattice, increasing dislocation den-sity and decreasing stacking fault energy, forming stable RE oxidation by internal oxidation, and soon, were observed. They were strengthening sensitive factors. The influence of the factors onstrength properties and elongation of Pd was discussed.     

Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

The mold filling and solidification simulation for the high pressure die casting (HPDC) and low pressure die casting (LPDC) processes were studied.A mathematical model considering the turbulent flow and heat transfer phenomenon during the HPDC process has been established and paralled computation technique was used for the mold filling simulation of the process.The laminar flow characteristics of the LPDC process were studied and a simplified model for the mold filling process of wheel castings has been developed.For the solidification simulation under pressure conditions,the cyclic characteristics and the complicated boundary conditions were considered and techniques to improve the computational efficiency are discussed.A new criterion for predicting shrinkage porosity of Al alloy under low pressure condition has been developed in the solidification simulation process.     

A new DSmT combination rule in open frame of discernment and its application

A new combination rule based on Dezert-Smarandache theory (DSmT) is proposed to deal with the conflict evidence resulting from the non-exhaustivity of the discernment frame. A two-dimensional measure factor in Dempster-Shafer theory (DST) is extended to DSmT to judge the conflict degree between evidence. The original DSmT combination rule or new DSmT combination rule can be selected for fusion according to this degree. Finally, some examples in simultaneous fault diagnosis of motor rotor are given to illustrate the effectiveness of the proposed combination rule.     

Kaman协议的形式化验证

Kaman协议是移动Ad Hoc网络安全认证机制,然而,协议设计者未对该协议的安全性作严格的形式化分析。协议复合逻辑PCL是验证协议安全属性的形式化方法,PCL逻辑能够简化协议安全分析过程。本文在协议复合逻辑PCL中描述Kaman协议并分析Kaman协议的安全属性,证明Kaman协议能够实现其安全目标。     

NCS中实时数据库的多版本并发控制研究

实时数据库是网络控制系统(NCS)的重要组成部分,是整个控制系统中数据交换的平台。本文在原有的两段锁机制的基础上,提出一种适用于多版本的两段锁并发控制方法。简述数据多版本给现场控制带来的不利影响。分析在数据多版本的情况下,现场事务的可串行性,用多版本并发控制协议MV2PL解决多版本并发控制问题。用简化的多版本并发协议2V2PL说明它的正确性,并通过实例表明该协议是可行的。