Optimum design of δ-doped InGaAs avalanche photodiode byusing quasi-ionization rates

An avalanche photodiode (APD) designed by using quasi-ionization rates in InP and InGaAs is described. The structure has a δ-doped layer in an InP window layer. The heterointerface electric field is investigated and determined to prevent the tunneling current and carrier multiplication in InGaAs. The gain bandwidth (GB) product of the δ-doped APD is analyzed by R.B. Emmons's (1967) p-i-n electric field method. The highest GB product is 160 GHz     

Convergence acceleration and accuracy improvement in power bus impedance calculation with a fast algorithm using cavity modes

Based on the cavity-mode model, we have developed a fast algorithm for calculating power bus impedance in multilayer printed circuit boards. The fast algorithm is based on a closed-form expression for the impedance Z matrix of a rectangular power bus structure; this expression was obtained by reducing the original double infinite series into a single infinite series under an approximation. The convergence of the single series is further accelerated analytically. The accelerated single summation enables much faster computation, since use of only a few terms is enough to obtain good accuracy. In addition, we propose two ways to compensate for the error due to the approximation involved in the process of reducing the double series to the single series, and have demonstrated that these two techniques are almost equivalent.     

High-speed DCFL circuits with very shallow junction GaAs JFETs

High-speed DCFL (direct-coupled FET logic) circuits implemented with advanced GaAs enhancement-mode J-FETs are discussed. A divide-by-four static frequency divider operates at up to 6 GHz with a power consumption of 20 mW/flip-flop. A high channel concentration of more than 1×10¹⁸ cm^-3 together with a very shallow junction depth of less than 30 nm for the p⁺-gate results in a transconductance as high as 340 mS/mm at a gate length of 0.8 μm. Open-tube diffusion of Zn using diethylzinc and arsine makes it possible to control a very shallow p⁺-layer less than 10 nm thick. The propagation delay time, as measured with a ring oscillator, was 22 ps/gate with a power consumption of 0.42 mW/gate     

Anti‐windup synthesis for a model predictive control system

In this paper, an anti‐windup design problem for a model predictive control system is studied. The plant is assumed to be stable. First, we propose the structure of an output feedback model predictive controller with an anti‐windup compensator. Then we show a design method of the anti‐windup compensator that guarantees closed‐loop stability and improves the transient response. The design problem of the anti‐windup compensator is reduced to a linear matrix inequality (LMI) optimization problem. Further, it is shown that there always exists an anti‐windup compensator that ensures global asymptotic stability. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Highly unsaturated fatty acid might act as an antioxidant in emulsion system oxidized by azo compound

Now it is recognized that DHA is oxidatively stable fatty acid compared with linoleic acid (LA) in emulsified system, although DHA is oxidatively unstable in a bulk system. In fact, an emulsified mixture of DHA and LA behaves as in a bulk system, namely the oxidative stability of DHA becomes lower than that of LA. Therefore, in this study, tridocosahexaenoate (DDD) and glycerol trilinoleate (LLL) were separately emulsified using TritonX-100 as an emulsifier and DDD emulsion was mixed with the oxidizing LLL emulsion using a water-soluble radical initiator, 2,2'-azobis(2-aminopropane) dihydrochloride. As a result, DHA suppressed the oxidation of LA, while DHA was not significantly oxidized. This suppression ability was examined using glycerol trieicosapentaenoate, glycerol trilinolenate, or glycerol trioleate instead of DDD and it was found that this activity was increased with the increasing number of double bonds in the structure. Furthermore, the same type of experiment was carried out using a lipid-soluble radical initiator, 2,2'-azobisisobutyronitrile and the similar result was obtained. These results indicated that a highly polyunsaturated fatty acid might act as an antioxidant in an emulsion system oxidized by an azo compound.     

Ethanol Conversion on MCM-41 and FSM-16, and on Ni-Doped MCM-41 and FSM-16 Prepared without Hydrothermal Conditions

MCM-41 and FSM-16 were both prepared using no hydrothermal conditions, and nickel was doped into these catalysts (Ni-MCM-41 and Ni-FSM-16) using a template ion exchange method. FSM-16 and Ni-FSM-16 had greater catalytic activity for the conversion of ethanol than MCM-41 and Ni-MCM-41, indicating that FSM-16 has potential as a catalyst for the conversion of ethanol to propylene.     

Analysis of the headspace volatiles of freshly brewed arabica coffee using solid-phase microextraction

ABSTRACT:  Headspace volatiles of freshly brewed drip coffee were investigated by gas chromatography/mass spectrometry (GC/MS) and gas chromatography/olfactometry (GC/O, CharmAnalysis™) analyses. For this purpose, a solid-phase microextraction (SPME) sampling method for the headspace volatiles of freshly brewed drip coffee was developed. SPME fiber coated with divinylbenzene (DVB)/carboxen/polydimethylsiloxane (PDMS) was selected from 6 types, and sampling time was determined at 2 min. The headspace coffee volatiles stayed constant in proportion for the first 2 min to keep the freshness of the brewed coffee aroma. Using this sampling method, the headspace volatiles of freshly brewed drip coffee (Ethiopian arabica coffee, roast degree: L value; 23) were examined by GC/MS and GC/O analyses. From the GC/O results, 1-(3,4-dihydro-2 H -pyrrol-2-yl)-ethanone (nutty-roast odor) and 4-(4'-hydroxyphenyl)-2-butanone (raspberry ketone, sweet-fruity odor) were newly detected as components in the aroma of coffee.     

The relationship between acoustic emission signals and cutting phenomena in turning process

The development of intelligent manufacturing by using machine tools is advancing in leaps and bounds. To maintain accuracy in machining and in the interests of fail-safe operation, monitoring of the cutting state or the final machining is very important. Acoustic emissions (AE) comprise elastic stress waves produced as a result of the deformation and fracture of materials. By measuring the AE generated during a turning process, it is possible to estimate the state of the machining operation. The correlation between cutting phenomena and AE in a turning process was examined experimentally by using a steel workpiece and a cermet tool in a numerically controlled turning process. The process of formation of chips, the types of chip, and the shear angle all markedly affected the AE signals. There was a strong negative correlation between the shear angle and the AE signal level. Similar results were obtained for various feed rates and for workpieces of various degrees of hardness. Correlations related to surface roughness and to tool wear are also described that permit the evaluation of the state of the turning process.     

4He Fluid in Extremely Narrow 1D Channels 1.5?nm in?Diameter

To examine whether one-dimensional (1D) helium quantum fluid is realized in narrower channels than those studied previously, we have measured heat capacities of ⁴He adsorbed in nanoporous material FSM with straight 1D channels 1.5 nm in diameter. From the heat of desorption for adsorbed ⁴He, the coverage n _f, up to which ⁴He film grows in the channels, is determined to be 15.4 ??mol/m² using the Frenkel-Halsey-Hill model. At coverages sufficiently below n _f, the temperature dependence of the ⁴He heat capacity has a shoulder, above which adsorbed ⁴He is delocalized from the substrate. On the other hand, the depression of the heat capacity indicating quantum effects has not been observed up to n _f, which suggests that ⁴He film in the channels remains amorphous-like normal fluid. Just above n _f, the quantum effect is observed in ⁴He adatoms on the grain surface of FSM powder, which indicates that 1.5 nm channels are slightly below the limit required to realize quantum effect in the inside ⁴He fluid.     

A 500-MHz pipelined burst SRAM with improved SER immunity

This paper describes a 0.25-μm, 64 K×36 bit pipelined burst SRAM using a 6.156-μm² cell. It realizes over 500-MHz operation using a lower cost double metal process, Internal 16 K×144 organization by T-shaped bit line array reduces 20% of latency, 20% of active power, and 8.5% of die size. The low power also enables us to use lower cost thin quad flat type packages. Our solution to the soft error problem, a shallow triple well structure and four-transistor cell with stacked capacitor, improved soft error rate by 3.5 orders of magnitude compared with the conventional SRAM cell