RH-KTB耐材长寿技术研究及应用

介绍了宝钢RH-KTB工艺条件下RH用镁铬砖的应用和提高浸渍管管龄、下部槽槽龄的方法.     

Optical phase conjugation of multiwavelength signals in adispersion-shifted fiber

Optical phase conjugation (OPC) of multiwavelength signals in a dispersion-shifted fiber (DSF), which can be used for dispersion compensation in the wavelength division multiplexing communication system, is theoretically studied. The multiwavelength phase-conjugate signals are generated by four-wave mixing (FWM) in the dispersion-shifted fiber. There are the pulse-shape distortion and the induced frequency chirping in the phase-conjugate signals owing to pump depletion and the cross-phase modulation among the signals and phase-conjugate signals, respectively. The FWM among the pump wave, signals, and phase-conjugate signals causes unequal conversion efficiencies for the multiwavelength signals and enhances the induced frequency chirping in the phase-conjugate signals. The induced frequency chirping may deteriorate the restoration of the pulse shape. Both the pulse-shape distortion and induced frequency chirping increase with the signal and pump powers. The formula for the induced frequency chirping that is only caused by the signals through cross-phase modulation is derived. The requirement of the signal power in the dispersion-shifted fiber for the restoration of the pulse shape by the optical phase conjugation is estimated and numerically verified     

大断面交岔点失稳分析及治理

通过工程地质调查、室内围岩物化分析和力学试验 ,深入研究了围岩变形力学机制和破坏机理 .根据新奥法施工原理 ,采取了有针对性的综合治理措施 ,将围岩复杂的变形力学机制转化为单一的变形力学机制 ,使该工程得到了有效治理 .取得的技术经验推广应用于该矿井其它失稳破坏工程 ,均获得了圆满成功     

天然竹芋淀粉及其接枝共聚

分析了竹芋淀粉的伴生物组成，粒径分布及直链淀粉的含量，研究了竹芋淀粉与甲基丙烯酸甲酯的接枝共聚，用偏光显微镜，Ｘ射线衍射等方法研究了淀粉接枝共聚反应前后的结构与形态，认为淀粉的结晶区和非晶区均为接权共聚反应的场所。     

松香及其衍生物在浮选分离中的应用

介绍了松香的来源、化学组成及理化性质；讨论了松香及其衍生物在非硫化物矿浮选分离、有色金属离子的浮选分离以及从水溶液中浮选分离有机物等方面的应用情况。     

Williams高压旋转防喷器国产化要点浅析

旋转防喷器是欠平衡钻井的关键井控设备之一，现文以Williams7100型高压旋转防喷器为例，分析了其壳体总成、旋转总成以及钻具密封的设计分析要点，旨在推动该装置的国产化进程。     

轴端沟槽底部激光强化工艺参数优化研究

分析了选用不同激光能量密度对HT300进行表面强化处理时，材料表面呈现的四种状况；未相变硬化、相变硬化、表面微熔与表面熔凝的金相组织。根据工艺要求，选取相变硬化方法对轴端沟槽底表面进行处理。分析了工件激光处理方法并通过试验研究，寻找轴端沟槽底部激光强化工艺参数；激光功率（P）、光斑直径（D）及扫描速度（V）的优化组合。硬度测试及耐磨性能试验表明：激光相变处理和激光熔凝处理后轴端沟槽底部表面较表面感应淬火硬度分别提高7%和34%，绝对磨损体积分别下降了13%和25%。实践证实，对轴端沟槽底部激光相变硬化处理方法较其他表面处理方法工艺简单，加工工件符合技术要求，试验结果对零件表面处理提供了可靠依据。     

MMDS技术综述

本文介绍多点多频道电视信号开路分配服务系统,并简述了传输接收技术。     

Synthesis and characterization of novel copolymers with the trimethylsilyl group for deep‐UV photoresists

N‐(4‐Acetoxyphenyl) maleimide (APMI) and three kinds of comonomers bearing a trimethylsilyl group were copolymerized at 60°C in the presence of azobisisobutyronitrile (AIBN) as an initiator in 1,4‐dioxane to obtain the three IP, IIP, and IIIP copolymers. These copolymers were removed from the acetoxy group in a transesterification process into new IVP, VP, and VIP copolymers with a pendant hydroxyl group. Two modified processes were adopted to prepare photoresists using these copolymers. The first process involved mixing the dissolution inhibitor, o‐nitrobenzyl cholate, with the new copolymers. Second, o‐nitrobenzyl cholate was introduced into the copolymers using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) in dimethylformamide (DMF). The cyclic maleimide structure is responsible for the high thermal stability of these copolymers. After irradiation using deep–UV light and development with aqueous Na₂CO₃ (0.01 wt %), the developed patterns showed positive images and exhibited good adhesion to the silicon wafer without using any adhesion promoter. The resolution of these resists was at least 0.8 μm and an oxygen‐plasma etching rate was 1/5.3 to that of hard‐baked HPR‐204. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2791–2798, 2002; DOI 10.1002/app.10255     

火工品检验过程中常见的几个质量问题及原因分析

介绍了火工品检验过程中常见的几个质量问题，如零部件报废、工艺控制、外观质量、绝缘电阻等，对常见问题的原因进行了分析，并提出了质量控制的措施。