Polarization of skylight in the O(2)A band: effects of aerosol properties

Motivated by several observations of the degree of linear polarization of skylight in the oxygen A (O(2)A) band that do not yet have a quantitative explanation, we analyze the influence of aerosol altitude, microphysics, and optical thickness on the degree of linear polarization of the zenith skylight in the spectral region of the O(2)A band, between 755 to 775 nm. It is shown that the degree of linear polarization inside the O(2)A band is particularly sensitive to aerosol altitude. The sensitivity is strongest for aerosols within the troposphere and depends also on their microphysical properties and optical thickness. The polarization of the O(2)A band can be larger than the polarization of the continuum, which typically occurs for strongly polarizing aerosols in an elevated layer, or smaller, which typically occurs for depolarizing aerosols or cirrus clouds in an elevated layer. We show that in the case of a single aerosol layer in the atmosphere a determination of the aerosol layer altitude may be obtained. Furthermore, we show limitations of the aerosol layer altitude determination in case of multiple aerosol layers. To perform these simulations we developed a fast method for multiple scattering radiative transfer calculations in gaseous absorption bands including polarization. The method is a combination of doubling-adding and k-binning methods. We present an error estimation of this method by comparing with accurate line-by-line radiative transfer simulations. For the Motivated by several observations of the degree of linear polarization of skylight in the oxygen A (O(2)A) band that do not yet have a quantitative explanation, we analyze the influence of aerosol altitude, microphysics, and optical thickness on the degree of linear polarization of the zenith skylight in the spectral region of the O(2)A band, between 755 to 775 nm. It is shown that the degree of linear polarization inside the O(2)A band is particularly sensitive to aerosol altitude. The sensitivity is strongest for aerosols within the troposphere and depends also on their microphysical properties and optical thickness. The polarization of the O(2)A band can be larger than the polarization of the continuum, which typically occurs for strongly polarizing aerosols in an elevated layer, or smaller, which typically occurs for depolarizing aerosols or cirrus clouds in an elevated layer. We show that in the case of a single aerosol layer in the atmosphere a determination of the aerosol layer altitude may be obtained. Furthermore, we show limitations of the aerosol layer altitude determination in case of multiple aerosol layers. To perform these simulations we developed a fast method for multiple scattering radiative transfer calculations in gaseous absorption bands including polarization. The method is a combination of doubling-adding and k-binning methods. We present an error estimation of this method by comparing with accurate line-by-line radiative transfer simulations. For the O(2)A band, the errors in the degree of linear polarization are less than 0.11% for transmitted light, and less than 0.31% for reflected light. band, the errors in the degree of linear polarization are less than 0.11% for transmitted light, and less than 0.31% for reflected light.     

Web-based environmental simulation: bridging the gap between scientific modeling and decision-making

Data availability in environmental sciences is growing rapidly. Conventional monitoring systems are collecting data at increasing spatial and temporal resolutions; satellites provide a constant stream of global observations, and citizen scientist generate local data with electronic gadgets and cheap devices. There is a need to process this stream of heterogeneous data into useful information, both for science and for decision-making. Advances in networking and computer technologies increasingly enable accessing, combining, processing, and visualizing these data. This Feature reflects upon the role of environmental models in this process. We consider models as the primary tool for data processing, pattern identification, and scenario analysis. As such, they are an essential element of science-based decision-making. The new technologies analyzed here have the potential to turn the typical top-down flow of information from scientists to users into a much more direct, interactive approach. This may accelerate the dissemination of environmental information to a larger community of users. It may also facilitate harvesting feedback, and evaluating simulations and predictions from different perspectives. However, the evolution poses challenges, not only to model development but also to the communication of model results and their assumptions, shortcomings, and errors.     

Hybrid cascode feedforward compensation for nano-scale low-power ultra-area-efficient three-stage amplifiers

A modified frequency compensation technique is proposed for low-power area-efficient three-stage amplifiers driving medium to large capacitive loads. Coined hybrid cascode feedforward compensation (HCFC), the total compensation capacitor is divided and shared between two internal high-speed feedback loops instead of only one loop as is common in prior art. Detailed analysis of this technique shows significant improvement in terms of bandwidth and stability. This is verified for a 1.2-V amplifier driving a 500-pF capacitive load in 90-nm CMOS technology, where HCFC reduces the total capacitor size and improves the gain-bandwidth by at least 30% and 40% respectively, compared to the prevailing schemes.     

Ester-functionalized poly(3-alkylthiophene) copolymers: Synthesis,physicochemical characterization and performance in bulk heterojunction organic solar cells

The introduction of functional moieties in the donor polymer (side chains) offers a potential pathway toward selective modification of the nanomorphology of conjugated polymer:fullerene active layer blends applied in bulk heterojunction organic photovoltaics, pursuing morphology control and solar cell stability. For this purpose, two types of poly(3-alkylthiophene) random copolymers, incorporating different amounts (10/30/50%) of ester-functionalized side chains, were efficiently synthesized using the Rieke method. The solar cell performance of the functionalized copolymers was evaluated and compared to the pristine P3HT:PCBM system. It was observed that the physicochemical and opto-electronic characteristics of the polythiophene donor material can be modified to a certain extent via copolymerization without (too much) jeopardizing the OPV efficiency, as far as the functionalized side chains are introduced in a moderate ratio (<30%) and that preference is given to side chains with a small molar volume. A range of complementary techniques – UV–Vis spectroscopy, (modulated temperature) differential scanning calorimetry, transmission electron microscopy and X-ray diffraction analysis – indicated that variations in polymer crystallinity, while maintaining a high level of regioregularity, are probably the main factor responsible for the observed differences.     

Investigating measurements of fine particle (PM2.5) emissions from the cooking of meals and mitigating exposure using a cooker hood

There is growing awareness that indoor exposure to particulate matter with diameter ≤ 2.5 μm (PM_2.5) is associated with an increased risk of adverse health effects. Cooking is a key indoor source of PM_2.5 and an activity conducted daily in most homes. Population scale models can predict occupant exposures to PM_2.5, but these predictions are sensitive to the emission rates used. Reported emission rates are highly variable and are typically for the cooking of single ingredients and not full meals. Accordingly, there is a need to assess PM_2.5 emissions from the cooking of complete meals. Mean PM_2.5 emission rates and source strengths were measured for four complete meals. Temporal PM_2.5 concentrations and particle size distributions were recorded using an optical particle counter (OPC), and gravimetric sampling was used to determine calibration factors. Mean emission rates and source strengths varied between 0.54—3.7 mg/min and 15—68 mg, respectively, with 95% confidence. Using a cooker hood (apparent capture efficiency > 90%) and frying in non‐stick pans were found to significantly reduce emissions. OPC calibration factors varied between 1.5 and 5.0 showing that a single value cannot be used for all meals and that gravimetric sampling is necessary when measuring PM_2.5 concentrations in kitchens.     

Divergent principles in third world rural planning: a case study on impoldering

Third World rural planning involves the transfer of First World technologies to the socially and ecologically vulnerable tropical environment. This transfer is guided by normative, “ideological” views concerning social and environmental issues which often remain implicit. To uncover these views, a content analysis of a series of papers has been carried out, focused on impoldering as a type of project with far reaching social and environmental impacts. Three types of “ideologies” could be distinguished, which have been labelled as sociocratic, eco‐sociocratic and technocratic. They differentiate significantly with regard to (1) values attached to ecological and cultural systems, (2) preferred pace and scale of projects, (3) envisaged project feasibility, (4) the range of feasible alternatives, as well as (5) the institutional background of their adherents. The latter separation, however, is not complete. This may stimulate the growth of insight in the normative background of the seemingly objective rationality of project design.     

The effect of shear deformations in floorbeams on the moment distribution in orthotropic plated bridge decks

Floorbeams of orthotropic plated bridge decks are generally elements with a low slenderness, especially in the case of railway bridges. When loaded, such elements generate not only flexural deformations but shear deformations as well. Depending on the configuration, these shear deformations can be considerably large and should certainly not be neglected. In a design according to the Pelikan-Esslinger method, this deformation is taken into account in the second stage of the calculation of the orthotropic deck. At this stage, the additional bending moments, shear forces and floorbeam reactions due to the floorbeam flexibility are evaluated. The deflection of a directly loaded floorbeam creates a distribution of the load to adjacent non-loaded floorbeams. In addition, the deflection will affect the longitudinal ribs, increasing the sagging moments at midspan and decreasing the bending moments at the supports of the ribs provided by the floorbeams. In this paper a method is developed to take the shear deformation in the floorbeam into account, thus correcting the Pelikan-Esslinger method. The correction is especially important since the floorbeam web is frequently further weakened by cutouts for the longitudinal ribs and in some cases additional cope holes. The floorbeam web resisting the shear deformation is further reduced by these openings, increasing the importance of shear deformations even for more slender floorbeams. The validity of the proposed method is checked by full finite element calculation using shell elements which inherently comprise shear deformation. The effect of the correction on the calculations in the second stage of the calculation are relatively small for the floorbeam reactions; on the contrary, it can be quite large for the additional bending moments in the longitudinal ribs. In that case, the effect is worth considering.     

Nanofiltration for the separation of pharmaceuticals from nutrients in source-separated urine

The potential of nanofiltration for the separation of pharmaceutical and estrogenic compounds from salts in urine was investigated with the aim of producing a micropollutant-free nutrient solution that can be used as a fertilizer. A fresh urine solution and a synthetic solution of similar inorganic composition were tested at different pH values in order to investigate their separation behavior. These solutions were spiked with the micropollutants propranolol, ethinylestradiol, ibuprofen, diclofenac and carbamazepine. Among the membranes tested, NF270 showed the best performance with respect to the retention of micropollutants. The optimum retention of micropollutants was obtained at values of around pH 5. At this point, the retention of all micropollutants in non-hydrolysed urine was above 92%, while the corresponding value for the synthetic urine solution was above 73%. From the results, it can be concluded that the retention mechanism is determined by steric and electrostatic effects as well as by the partitioning of the micropollutants in the membrane. The nutrients urea and ammonia were well permeated, but phosphate and sulfate were almost completely retained. Nanofiltration can consequently be used to produce a permeate which contains most of the nitrogen and a greatly reduced proportion of micropollutants.