使用Visual C+ +实现串行通讯

以VisualC 为工具，探讨了在RS-232C接口协议下DTE设备之间通讯的实现问题。     

软包装标牌模具的设计和加工

分析了零件的工艺特点 ,介绍了此类软包装高速冲模的结构 ,以及模具中的计数装置、凸模上吹气卸料和收料装置 ,并对该模具的加工工艺做了详细的介绍     

Tribological behavior of high specific strength PTFE-Al alloy composite

Solid lubricants lead to substantial weight savings relative to the use of liquid lubricant, especially in the weight-conscious aerospace industry. A new PTFE-Al alloy composite（A） containing 60% area proportion of PTFE composite was developed. Another type of common metal-plastics multilayer composite, also called DU, was selected for a comparative investigation. Friction and wear tests were carried out in an oscillating sliding tribotester in air at an oscillating frequency of 0.13 Hz and contact mean pressures from 10 to 80 MPa. The composites slid against a 38CrMoAlA steel shaft. The results show that the composite A exhibits low coefficient of dry sliding friction less than 0.1 and long wear life of 2 000 m. This is because the composite A can provide a sufficient solid lubrication during the whole tests. SEM examination of the transfer films for the composite A confirms that uniform, thin and coherent transfer films are prerequisites for low friction and good wear resistance.     

下喷式环流反应器环隙气含率影响因素

下喷式环流反应器是一种用于强化气-液两相反应过程的新型装置，虽然已在工业上有了较广泛的应用，但对其理论研究远未成熟，其工业装置的设计仍依赖于实验和经验。本文借助实验室自制实验装置，对下喷式环流反应器环隙气含率的影响规律进行了研究。首先，对喷射器的吸气量进行了测量，获得了不同条件下喷射器最大吸气量的性能曲线；在此基础上，分别研究了气相流量、液相流量以及喷射器安装位置对环隙气含率的影响规律。结果表明：气相流量和液相流量对气含率具有重要的影响，随着气相流量和液相流量的增大，气含率快速提高，而喷嘴位置对气含率的影响相对较小；考虑到增加气相流量和液相流量所需要的能耗和设备代价，通过增加液相流量来达到提高气含率的目的是优选方案。     

以葡萄糖为辅助底物发酵生产1,3-丙二醇的研究

采用Klebsiellapneumoniae对葡萄糖作为辅助底物发酵生产 1 ,3 丙二醇进行了研究。结果表明葡萄糖单独作为底物发酵时不生成 1 ,3 丙二醇。以葡萄糖和甘油为混合底物时 ,则可以显著提高菌体浓度 ,但是 1 ,3 丙二醇浓度和甘油到 1 ,3 丙二醇转化率没有提高。在甘油为底物的批式发酵过程中 ,通过流加葡萄糖作为辅助底物可以提高甘油到 1 ,3 丙二醇的摩尔转化率 ,同时可缩短发酵时间。通过选择合适的葡萄糖流加速率 ,较以甘油为单一底物的发酵结果 ,1 ,3 丙二醇的摩尔转化率最高可达0 649,提高了 53 4% ;生产强度为 1 0 0 5g/ (L·h) ,提高了 1 39 9%。     

三聚氰胺改性脲醛树脂粉体胶粘剂的研制

用三聚氰胺改性脲醛树脂改善了胶粘剂的耐沸水性,并有效地降低了游离甲醛含量。三聚氰胺改性脲醛树脂粉体胶粘剂应用更广泛,性能更可靠。     

Cooperative effect of crystallization temperature and NaF addition in the formation process and hydrothermal stability of MCM-48 mesoporous molecular sieve

The hydrothermal stability of MCM-48 was conveniently and effectively improved by increasing the crystallization temperature and directly adding NaF to the synthesis gel. The crystallization temperature varied from 373 K to 403 K. The influences of NaF addition, crystallization temperature and crystallization time on the formation process and hydrothermal stability of MCM-48 were systematically studied here to solve the problem of poor reproducibility. Results from XRD patterns indicated that the crystallization temperature and crystallization time were very critical factors for the improvement of the hydrothermal stability besides NaF addition. The formation process of MCM-48 was significantly accelerated and the pore structure ordering was also greatly improved by increasing the crystallization temperature and F⁻/Si ratio. A high hydrothermally stable MCM-48 mesoporous molecular sieve was obtained after being crystallized at 393 K for 36 h in the presence of NaF, which endured the hydrothermal treatment in boiling water at least for 4 days. However, only an amorphous product was obtained when the crystallization temperature was further increased to 403 K. Results from Si MAS NMR, N₂ adsorption isotherms, TEM, Raman spectra and XRD patterns manifested that the improved stability of MCM-48 was attributed to the high silicates condensation degree and the excellent pore structure ordering. The possible reason for the successful formation of hydrothermally stable MCM-48 sample by controlling the crystallization temperature, time and F⁻/Si ratio was explained here.     

某水电站厂房洞室群围岩点荷载强度试验成果分析及利用研究

通过厂房地下洞室群围岩点荷载试验,获得了洞室不同深度位置岩石点荷载强度值,试验发现各平洞点荷载强度随洞室深度变化呈现明显的波动性变化特征。研究表明,围岩岩性、断层以及岩石微观结构等是影响岩石点荷载强度的主要因素。其中,围岩中普遍发育的矿物定向排列是导致点荷载强度波动性变化的最主要因素。最后,通过与实测单轴抗压强度比较,得出当岩石单轴抗压强度大于60 MPa时,宜采用成都理工大学推荐公式换算单轴抗压强度,当单轴抗压强度小于60 MPa时,宜采用水利水电规范推荐的转换公式计算岩石单轴抗压强度。     

Investigation of bio-ethanol steam reforming over cobalt-based catalysts

The catalytic performance of cobalt catalysts supported on γ-Al₂O₃, TiO₂, ZrO₂ were studied for bio-ethanol steam reforming (BESR) reaction. The supported catalysts (10 wt%Co) were prepared by impregnation and characterized through Thermogravimetric analysis (TGA), H₂ chemisorption, laser Raman Spectroscopy, Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), and temperature-programmed reaction (TPRxn). The metallic cobalt sites were found to correlate with the BESR reaction activity. The reaction and H₂ chemisorption showed that ZrO₂ supported catalyst showed the best dispersion and best catalytic activity. Over the 10% Co/ZrO₂ catalyst, using a H₂O:EtOH:inert molar ratio of 10:1:75 and a GHSV = 5000 h⁻¹, 100% ethanol conversion and a yield of 5.5 mol H₂/mol EtOH were obtained at 550 °C and atmospheric pressure.     

纳米技术在水污染控制中的应用

纳米二氧化钛是目前最受人们关注的光催化剂之一.介绍了纳米技术在饮用水处理、印染废水、农药废水、含油废水处理等水污染控制中的应用进展情况,并对其应用前景作了展望.