混合匹配规则的否定选择算法

针对目前基于免疫的检测器生成算法中,匹配规则单一造成的检测器质量低下的问题,提出一种基于混合匹配规则的否定选择算法,采用海明距离整体匹配的各段内R连续比特匹配的否定选择算法,即混合匹配否定选择算法,对算法的性能进行了分析．实验结果表明,该算法能够高效地产生所需要的检测器,提高了检测率,且降低了误报率．     

Examining the use of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles to enhance the NH<Subscript>3</Subscript> sensitivity of polypyrrole films

Summary Polypyrrole (PPy) composite films with different contents of Fe₃O₄ were prepared by in-situ polymerization of pyrrole in aqueous solutions. The dependence of dc current changes on the response of the samples exposure to NH₃ vapor has been investigated. The results shows the composite films are more stable than the pristine ones after being exposed to NH₃ vapor. Meanwhile, the response time was reduced with increasing the Fe₃O₄ content in the films. The results might be originated from the structural changes in the PPy films caused by the addition of Fe₃O₄.     

清香木姜子的化学成分Ⅱ

利用硅胶柱层析分离及与标准品对照等方法从清香木姜子枝叶中分离得到4个化合物,1H NMR、13C NMR等技术及理化性质鉴定为:黄堇碱(1)、二十二酸(2)、二十六酸(3)、三十酸(4)。以上化合物均系首次从该植物中分离得到。     

Properties and pervaporation separation of hydroxyl‐terminated polybutadiene‐based polyurethane/poly(methyl metharcylate) interpenetrating networks membranes

Hydroxyl‐terminated polybutadiene (HTPB), 4,4′‐dicyclohexyl methane diiscyanate (H₁₂MDI), and 1,4‐butane diol are used to synthesize polyurethane (PU) solutions by two‐stage process. Interpenetrating networks (IPNs) of HTPB‐based PU and poly(methyl methacrylate) (PMMA) with HTPB/MMA (wt/wt % ratio) = 2.0, 1.5, 1.0, 1.5, 0.8, and 0.6, which are designated as IPN1 to IPN5, respectively, are synthesized by sequential polymerization technique. Thermal properties, tensile strength, and contact angle of membranes increase with the increase of MMA content, while the elongation of membranes show the reverse trend. Characterization of membranes are investigated by C?C/C?O absorption ratio and infrared absorption frequency shiftment. These PU and IPN membranes are used for the separation of ethanol/water and isopropanol/water solution by pervaporation test. IPN3 membrane possesses the largest pervaporation permeability and the separation factor. The pervaporation results of ethanol/water feed has the same trend as that of isopropyl alcohol (IPA)/water solution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

二芳基乙烯类光致变色化合物的合成及其光电性质研究

在氮气及-78℃条件下,合成了两种二芳基乙烯类光致变色化合物1,2-双(2-甲基-5-(4-N,N-二甲氨基苯基)噻吩-3-基)全氟环戊烯(Ⅰa)和1,2-双(2-甲基-5-萘基噻吩-3-基)全氟环戊烯(Ⅱa),通过紫外-可见吸收光谱、荧光光谱、循环伏安法对其光谱特性和电化学性质进行了初步研究。在254nm紫外光照射下,Ⅰa和Ⅱa的氯仿溶液均由无色变为蓝色,最大吸收峰分别为620和570nm,在适当波长可见光照射下,均从有色态返回到无色态。通过UV-Vis光谱考察了这两种二芳基乙烯类化合物在溶液中的光致变色反应的动力学特征,实验结果表明,二芳基乙烯类光致变色化合物的闭环反应属于零级反应,开环反应为一级。电化学研究表明,在溶液中,Ⅰa和Ⅱa可发生不可逆的阳极氧化反应。     

车辆悬架减震优化设计方法仿真

车辆在不同路况和不同车速等情况下,悬架系统弹性元件受到的冲击大小差异很大,无法形成固定的振动规则,振动剧烈程度与阻尼系数无法关联.传统车辆悬架减振设计方法,采用固定阻尼系数来减少弹性元件的振动,没有考虑不同路况及车速产生的振动剧烈程度不同的问题,减振效果较差.提出一种车辆悬架减震优化有限元设计方法,分析车辆悬架减震器的功能和结构,塑造车辆悬架减震优化模型,采用ANSYS有限元软件中一阶优化方法进行车辆悬架减振优化设计,以悬架减震器阻尼力为优化目标,以减震器阻尼系数为优化设计变量,以静强度和最大减震强度为约束条件,对车辆悬架减震进行有限元优化设计,确保车辆车身振动迅速衰弱,使车身能够很快达到一种稳定状态.实验结果表明,上述方法使车辆减震阻尼力和最大减震强度都优于传统方法,具有较高的稳定性和控制精度.     

Energetic surface heterogeneity of nanocrystalline TiO<Subscript>2</Subscript> films for dye-sensitized solar cells

Dye sensitized solar cells (DSSCs) have been receiving significant attention because they have many advantages compared to conventional organic solar cells. It has been known that the photovoltaic characteristics of DSSC are highly dependent on the adsorption properties of dyes on TiO₂ films. To analyze the surface heterogeneity of TiO₂ surfaces, single-phase anatase nanocrystallite titanium films were prepared by sol-gel method using the hydrolysis reaction of titanium tetraisopropoxide under acidic condition and characterized by XRD, FE-SEM and BET analysis. The adsorption energy distribution functions were calculated by the generalized nonlinear regularization method. It was found that the shape and the intensity of the adsorption energy distribution curve determined were highly related with the physical properties (i.e., geometrical heterogeneity) and chemical characteristics (i.e., energetic heterogeneity) of nanocrystalline TiO₂ for DSSC.     

多核程序交互理论及应用

多核处理器上共享缓存使用效率,即程序局部性是影响并行程序性能的关键因素之一。提出了以足迹为基础的局部性理论。介绍了缺失率、重用距离和足迹之间的转化关系,并利用足迹可组合性特征建立了并行程序局部性预测模型。     

A comprehensive study on the droplet formation processes and its influencing factors of a tubular piezoelectric print head

Abstract

Various inks with different properties are widely used in the printed electronic industry. In order to obtain high quality inkjet printing, it is necessary to study the droplet formation process and its influencing factors comprehensively. Only in this way, the incentive conditions and liquid physical parameters of droplet ejection can be obtained and optimized. Firstly, the calculation model of the droplet ejection process is established for a tubular print head and the boundary conditions are set according to the driving characteristics. Secondly, the free surface flow is calculated in the simulation software and sequential pictures of the droplet formation processes are captured to validate the availability of the numerical algorithm. Finally, the droplet formation processes of the tubular piezoelectric print head are simulated under different incentive conditions, different viscosities and different surface tensions. Too small a driving energy is insufficient to cause the head to eject droplets. Excessive excitation energy will result in larger or multiple satellite droplets. Additionally, the thinning process of the liquid neck is examined carefully in this paper. Results show that surface tension and viscosity have a significant effect on the thinning speed of the liquid neck, but the effect is not as significant as previous studies.