STRUCTURAL DETERMINATION OF TITANIUM-OXIDE NANOPARTICLES BY X-RAY ABSORPTION SPECTROSCOPY

As a potential application of titanium-oxide nanoparticles, it is extremely important to investigate a detailed picture of the surface and interior structural properties of nanocrystalline materials, such as rutile and anatase with diameters 7.0 and 4.5nm, respectively. X-ray absorption spectroscopy has been used to identify the local Ti environment and related electronic structure. We combine the experimental results at the Ti edge in both bulk and nano-crystals to determine the lattice distortion in terms of differently characteristic preedge features and the variation in the multiple-scattering region of X-ray absorption near-edge structure (XANES) spectra. The relationship between the transition peaks and the surface-to volume ratio is also discussed.     

THE APPARENT VISCOSITY OF SEMI-SOLID AZ91D ALLOY AT STEADY STATE

The rheological behavior of semi-solid AZ91D at steady state is studied using a Couette type viscometer in the present paper. The results show that the apparent viscosity of semi-solid AZ91D at the steady state increases with the solid fraction increasing, and goes up sharply when the solid fraction reaches a certain value, which is called critical fraction. In addition, the apparent viscosity of semi-solid AZ91D at the steady state takes on a distinct downtrend with the shearing rate increasing, which indicates a strong shear thinning property. In addition, the critical solid fraction becomes higher under larger shearing rate, owing to the more globular shape of the solid particles. Based on the present experiment results, an empirical equation is built as that, relating the steady state apparent viscosity of semi-solid AZ91D with the solid fraction fs andshearing rate (?) at the same time: ηapp=10.74exp(6.95fs)(?)-0.86.     

AN EXPERIMENTAL-NUMERICAL METHOD FOR MEASURING CRACK PROPAGATING VELOCITIES UNDER STRESS WAVE LOADING

An experimental-numerical method for measuring dynamic crack propagating velocities under stress wave loading is established in this paper. The experiments of the three-point bend specimen are done on the improved Hopkinson bar. Deflection of loading point, dynamic load and instantaneous crack length are measured, then crack propagating velocities are calculated. Experiments on 40Cr steel show that the results given by this method have a good agreement with that obtained by the resistance fracture gage method. Therefore this method is feasible for measuring crack propagating velocities under high loading rate and will have wide application.     

金属板材成形中拉深损伤模拟的两种求解方法

讨论用数值模拟预测板材成形中发生拉深损伤破坏的两种不同的求解方法。第一种是采用完全耦合的弹塑性破坯模型的动力显式数值方法。基于状态参量的不可逆热力学过程 ,完全耦合的本构方程考虑各向同性强化和拉深。这些已引入有限元软件ABAQUS/E用于对金属成形的模拟。在数值技术方面 ,隐式积分方法被用来对本构方程的局部时间积分 ,动力显式技术用于求解总体平衡方程。第二种方案是采用简化的损伤模型的方法 ,被称为逆法 (InveseApprch)。I.A被限定在考虑各向同性强化和损伤的塑性全量理论基础上的简单的本构关系。做比例加载和临界损伤达到以后的损伤饱和假定 ,可以得到损伤演化方程的封闭解。这两种损伤模型在编程中的实施采用两种方式 :计算中考虑或不考虑损伤作用 ,也就是耦合的或非耦合的计算。文中给出一些算例来说明每种损伤模型的优点     

CALCULATION OF TRANSFORMATION VOLUME FRACTION TO HQ590 HOT ROLLED STRIP STEEL DURING CONTINUOUS COOLING

On the basis of phase transformation kinetics, the transformation of γ→α,P,B have been investigated through considering the effect of deformation. The calculation methods of volume fraction have also been given. Comparing with common method, the simulated results are in more agreement with experiment results.     

EXPERIMENTAL TESTING OF DRAW—BEAD RESTRAINING FORCE IN SHEET METAL FORMING

Due to complexities of draw-bead restraining force calculated according to theory and depending on sheet metal forming properties experiment testing system, a simplified method to calculate draw-bead restraining force is put forward by experimental method in cup-shaped drawing process. The experimental results were compared with numerical results and proved agreement. It shows the method is effective.     

FORMATION OF MANGANESE SILICIDE THIN FILMS BY SOLID PHASE REACTION

1. IntroductionThe transition metal silicides have attraeted much attention because of their potentialapplicatiOIl in very large scale integration (VLSI) de.ice[1]. Near-noble metal silicides canbe used as Schottky al1d ohn1ic col1tacts in silicon-based d…     

STUDY OF MECHANISM OF RQ EMBRITTLEMENT OF Fe_(73.5)Cu_1-Nb_3Si_(13.5)B_9 NANOCRYSTALLINE SOFT MAGNETIC ALLOY

Rapidly quenching embrittlement (RQE) sometimes appears in Fe73.5Cu1Nb3Si13.5B9 nanocrystalline soft magnetic alloy (FINEMET) during production process. As a re-sult of RQE the ductility of the as-quenched ribbon drops seriously. The mechanism of RQE has been elucidated in the recent works of current authors. It was believed that RQE is due to the structural relaxation but not related to a-Fe(Si) crystallization. In this paper, the high resolution TEM (HRTEM) method and image digital processing were applied to analyze the HRTEM images of two FINEMET rapidly quenched ribbons with different thicknesses in detail. In the thinner ductile sample, the ordering domains with the size of about 3nm are observed. In the thicker RQE sample, the metastable nanocrystalline domains with the size of 18nm are observed along with the structural relaxation. These domains seem to have Fe3B-like metastable phase struc-ture on nanometer scale. The result indicates that the local atomic ordering regions extend when RQE induced     

THEORETICAL INVESTIGATION ON BY-ONLY-CURRENT ELECTROMAGNETIC SEPARATION OF INCLUSION FROM MOLTEN METALS

The electromagnetic field under applied AC and DC current in round and rectangular pipe was systematically investigated, then a concept of "equivalent current density" was proposed for evaluating the inhomogeneous electromagnetic pinch force, and the mono-component removal efficiency and the overall removal efficiency of inclusion were formulated. It is founded that flat pipe is superior to round pipe for the electromagnetic removal of inclusion, and DC current can get a higher removal efficiency than A C current due to absence of skin phenomenon. Under usual condition, a removal efficiency of 52% for 10μm inclusion or more than 92% for 20μm inclusion can be achieved by imposing a current density of 3×106A/m2 in a flat pipe.     

STUDY ON THE SHOCK WAVE CRYSTALLIZATION OF AMORPHOUS ALLOYS BY DSC

Shock wave and annealing crystallization of amorphous alloys FeSiB, FeMoSiB and FeCuNbSiB were studied by isothermal and non-isothermal DSC technique. It was found that the shock wave crystallization is very perfect, the fraction crystallized is very close to 100%, though the period of crystallization is very short, only about 10-4-10-6s. Their produced phases differ from the parent phase in structure and composition. The high velocity of the transformation is very difficult to explain by the diffusion theory of solid state phase transition.