自动气动无压平衡风门系统

为使风门系统开闭方便、动作灵活、减小破损、延长使用寿命,设计了平行四连杆机构、左右门扇同步异向开闭的无压平衡风门,分析了自动气动风门系统装置组成、工作原理、设备布置和动作过程。风门系统工作可靠能满足矿井通风系统和安全生产要求。     

空间质子探测仪器定标的10 MeV质子束源需求分析

分析了国内空间质子探测现状及其向着宽量程、高精度的发展趋势,并对比分析了国内外空间粒子探测仪器地面质子束源。依据空间质子能谱范围,从技术指标和业务运行角度,给出了空间质子探测仪器定标束流的加速器类型、离子源类型及束流输运和总体布局等方面需求。     

浅析火力发电厂汽水系统中内径管与外径管的设计选择

按照管道加工工艺的不同,管道可分为内径控制管和外径控制管。通过热轧工艺生产的外径控制无缝钢管,可满足火力发电厂汽水系统中绝大部分管道的使用要求。对于超(超)临界机组的主蒸汽和高温再热蒸汽管道采用的P91/P92材质的大口径厚壁无缝钢管,由于对材料性能和加工工艺有特殊要求,因此宜采用内径控制管。     

Automatic breast tumor detection in ABVS images based on convolutional neural network and superpixel patterns

Breast cancer is one of the most common female malignancies, as well as the second leading cause of mortality for women. Early detection and treatment can dramatically decrease the mortality rate. Recently, automated breast volume scanner (ABVS) has become one of the most frequently used diagnose methods for breast tumor screening because of its operator-independent and reproducible advantages. However, it is a challenging job to obtain the tumors’ accurate locations and shapes by reviewing hundreds of ABVS slices. In this paper, a novel computer-aided detection (CADe) system is developed to reduce clinicians’ reading time and improve the efficiency. The CADe system mainly contains three parts: tumor candidate acquisition, false-positive reduction and tumor segmentation. Firstly, a local phase-based approach is built to obtain breast tumor candidates for further recognition. Subsequently, a convolutional neural network (CNN) is applied to reduce false positives (FPs). The introduction of CNN can help to avoid complicated feature extraction as well as elevate the accuracy and efficiency. Finally, superpixel-based segmentation is used to outline the breast tumor. Here, superpixel-based local binary pattern (SLBP) is proposed to assist the segmentation, which improves the performance. The methods were evaluated on a clinical ABVS dataset whose abnormal cases were manually labeled by an experienced radiologist. The experiment results were mainly composed of two parts. At the FP reduction stage, the proposed CNN achieved 100% and 78.12% sensitivity with FPs/case of 2.16 and 0. At the segmentation stage, our SLBP obtained 82.34% true positive, 15.79% false positive and 83.59% Dice similarity. In summary, the proposed CADe system demonstrated promising potential to detect and outline breast tumors in ABVS images.

     

In-situ crystal growth and photoluminescence properties of YBO3: Tb3+ microstructures

Three-dimensional (3D) YBO₃:Tb³⁺ flower-like and dense flower-like hierarchitecture constituted of nanoflakes are solvothermally synthesized in the presence of polyborate precursors in the mixture of ethanol and water. The growth process of the YBO₃:Tb³⁺ flowers and dense flowers was explored based on the time-dependent experiment and the results showed that the growth mechanism follows an in situ growth rather than self-assembly process as reported previously. YBO₃:Tb³⁺ morphologies composed of nanoflakes are achieved by controlling the concentration of ethanol and dependence of photoluminescence on morphology was studied. Remarkable photoluminescence enhancement was observed for YBO₃:Tb³⁺ with flower-like morphology demonstrating the potential of the microstructure in future applications as a green phosphor. Such a synthetic method and growth mechanism may be applied to fabricate complex 3D architectures of other materials.     

面源红外诱饵对抗红外制导导弹干扰策略研究

面源红外诱饵使用的过程中,合理有效的干扰策略是干扰红外制导导弹的关键,针对这一问题,通过理论分析与仿真模拟相结合得到面源红外诱饵对抗红外制导导弹的干扰策略。首先以红外成像制导导弹为例,介绍红外制导导弹的仿真模型,然后将攻击过程分为锁定前与锁定后,以命中率为评价指标,得到两个阶段下的最佳干扰策略,包括诱饵的最佳释放时机、释放间隔以及载机应采取的机动动作等。     

脱硫活性焦水洗再生过程实验研究

对5种活性焦水洗再生前后的脱硫性能进行实验研究，通过比表面积（BET）、X射线光电子能谱（XPS）方法表征水洗再生工艺对活性焦孔隙结构和表面化学性质的影响，揭示影响活性焦水洗再生性能的关键因素。结果表明:活性焦脱硫硫容的大小和水洗再生率的高低没有直接关系；微孔比表面积较大的活性焦脱硫性能较好，中大孔孔容较大的活性焦水洗再生率较高，同时具备较大的微孔比表面积和中大孔孔容结构的活性焦适宜水洗再生工艺；活性焦表面极性含氧官能团含量越高水洗再生效果越好；活性焦AC5经过6次水洗再生循环，微孔中的硫酸经过多次累积后可以被水洗出，稳定再生率保持在45%~50%，最适用于活性焦水洗再生工艺。     

土壤中石油污染物的脱附过程

文章中主要采用有机溶剂萃取法（OSE）对高浓度石油污染土壤进行修复，经过精馏操作，有效回收原油，建立脱附等温曲线，研究了石油污染物在土壤-有机溶剂两相间的迁移规律。