地源热泵的地热能利用方式与工程运用

地源热泵是一种新型的高效、节能、环保的空调系统 ,是我国调整能源利用结构 ,发展利用可再生能源策略的重点推广项目之一。本文介绍了地源热泵的工作原理及四种地热能利用方式。根据笔者的设计经验 ,为地源热泵空调系统的工程设计和推广应用提供了一些设计参数和参考意见     

螺旋管簧的可靠性优化设计

讨论了螺旋管簧的可靠性优化设计问题。在基本随机变量的概率特性已知的情况下，采用二阶矩法和可靠性优化设计方法对螺旋管簧进行了可靠性优化设计。通过计算机程序可以直接实现螺旋管簧的可靠性优化设计，迅速准确地得到螺旋管簧的可靠性优化设计信息。     

Al-Cu-Fe系初生准晶相凝固过程的电子显微分析

采用包括金相（OM），粉末X射线衍射（XRD），扫描电子显微镜（SEM）观察和透射电子显微（TEM）分析等方法，研究了铸态Al592.Cu36.8Fe3.0Si1.0合金（700℃保温2．5h后水淬）的显微组织及相组成。发现铸锭中存在4种相：准晶I相，τ3相（或φ相），θ－Al2Cu相和η－AlCu相，凝固过程可描述为：初生晶是准晶Ⅰ相；在保温过程中发生包晶或共晶反应（L＋i→τ3(或φ）或L→τ3（或φ）＋i)形成的τ3相（或φ相），呈微畴结构；而剩余液体水淬形成θ－Al2Cu相和η－AlCu 相。     

钢管减阻型内涂层生产工艺及设备

介绍了钢管减阻型内涂层技术的生产工艺和主要设备，给出了内涂层生产线典型的工艺布置，并对主要设备的组成及工作原理进行了介绍。     

一种新型冰箱测试系统设计与应用

介绍了一种用于冰箱检测的新型测试系统，并在WIN98环境下用VB6．0实现该系统软件。该系统可以同时对四台冰箱的温度参数及其中一台冰箱的耗电量进行检测，该系统具有成本低，性能稳定的优点。     

TOP开关电源的设计与制作

利用TOP开关器件设计了一种高精度，输出电压可调的开关电源，并介绍了制作方法。     

DNA/lipid complex organogel with shape‐memory behavior

DNA and amphiphilic N,N,N‐trimethyl‐N‐hexadecylammonium bromide (THAB) were stoichiometrically mixed together to produce a DNA–lipid complex, which was dissolved in dimethyl sulfoxide (DMSO) at 65°C and then crosslinked with isophorone diisocyanate (IPDI). The obtained organogel swelled reversibly in DMSO, responding to the variation of temperature. Interestingly, we observed that the gel exhibited a temperature‐dependent shape‐memory behavior. Above 65°C, whatever the shape the gel was deformed to, it could retain the new shape as the temperature was decreased to room temperature, while, when the gel was heated to 65°C again, it could recover its initial shape. The shape‐memory characteristic is supposedly originated from the transition between the close‐packed and the destroyed DNA/lipid conformation. The elastic urethane crosslinking bonds between base‐pair sites act as a fixing phase. The gel holds promise in its application as a gentle actuator. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 259–263, 2002     

电视节目包装中的文字设计艺术

文字是电视节目包装中的重要元素之一,除了传达信息的基本功能外,经常起到决定整体效果的关键作用。节目包装文字设计应突出本台文化和本土文化,文字的设计必须与节目相匹配,形成统一整体。     

Stored energy analysis of Zn—5Al eutectic alloy in superplastic deformation

The stored energy and the energy release during SPD(superplastic deformation)of a Zn-5Al alloy were studied.The alloy after rolling process gains more stored energy,and the as-rolled speciment can obtain maximum elongation and minimum flow stress without hot loding treatment before SPD.Experimental results show that stroed energy release process is along with SPD process and is also an impetus to SPD.The as -rolled Zn-5Al alloy has 48J/mol stored energy which was measured with DSC(differential scanning calorimeter)and conforms well to the calcuated value.The as-rolled Zn-5Al alloy after SPD with an elongation of 2500% releases 112J/mol stored energy,Analysis shows that the strain rate is in direct ratio to the rate of stred energy release.     

内燃机车曲轴中频淬火过程的数值模拟

借助 ANSYS大型有限元分析软件 ,实现了 16 V2 4 0曲轴淬火过程的计算机模拟 ,模拟结果可直观地显示出任一时刻曲轴表面及内部的温度分布、冷却曲线以及淬火结束后的残余应力分布 ,并能预测淬硬层深度。同时对比了轴颈内圆角处进行淬火和不进行淬火两种工艺的效果 ,为现场提供了用虚拟现实方法详尽分析和研究淬火工艺的工具。