Bi3+对纳米MnO2水热合成的影响研究

在中性和酸性条件下，以MnO2作为锰源，通过水热合成了纳米MnO2，通过XRD和TEM对产物进行的观察表明，在酸性条件下，向溶液中添加一定量的Bi^3 ，产物的晶型由α型向γ型转化，产物形貌由针状、丝状向颗粒状转变。     

B－ISDN中的拥塞控制技术

Ｂ－ＩＳＤＮ是现代电信网的发展方向，拥塞控制技术则是其中的一个重要问题。由于Ｂ－ＩＳＤＮ采用新的信息传递方式──ＡＴＭ，使传统的拥塞控制方法不再适用。本文依据ＩＴＵ－Ｔ有关建议的最新内容对Ｂ－ＩＳＤＮ拥塞控制的基本思想、工作机制以及其中的主要功能作了较为详细的分析讨论，并提出了一些Ｂ－ＩＳＤＮ拥塞控制技术中尚需进一步研究的问题。     

川东地区长兴组缝洞型储层的识别

本文针对四川东部地区上二叠统长兴组(P_2~2)缝洞型储层的低孔、低渗及非均质性等特点,分析了影响这类储层识别的主要因素,提出了利用现有的地球物理测井手段定性识别储层的指标和定量综合识别储层的方法,这可望提高测试成功率。     

激光微焊接质量的模糊识别技术研究

讨论了激光微焊点焊接质量的模糊识别的概念，数学模型及其应用方法，并介绍了系统的硬件组成。     

二烷基硫代磷酸铵的捕收性能

本文研究了二烷基硫代磷酸铵（ＲＯ）２ＰＳＯＮＨ４（Ｒ＝乙基、丁基、己基、烯丙烯）系列捕收剂对非硫化矿孔雀石、锡石、赤铁矿、白铅矿、方解石和菱锌矿的浮选性能，并就药剂结构与性能关系进行了分析讨论．     

Quantum-mechanical reaction rate constants from centroid molecular dynamics simulations: Barrier crossing in an asymmetrical double-well

Quantum-mechanical reaction rate constants were calculated from centroid molecular dynamics (CMD) simulations, for the case of barrier crossing in an asymmetrical double-well potential bilinearly coupled to a harmonic bath. The calculation is based on a recently proposed formulation of the reaction rate constant in terms of the position—flux correlation function, which can be approximated via CMD in a well-defined manner. The predictions of CMD and various simplified versions of it are compared to exact results, which were obtained via the quasi-adiabatic propagator path integral (QUAPI) method, and/or path integral quantum transition state theory (PI-QTST). The predictions based on CMD are found to be in good agreement with both.     

Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

反水锤的危害及防止

反水锤是发生在反击式水轮机尾水道中的一种特殊水锤现象，其压力峰值可达正常压力的几倍，甚至十多倍，以致造成肢解转轮、折断导叶、破坏顶盖、抬起转子的严重事故。因此，研究反水锤发生的原因，从而提出防止反水锤事故的措施尤为重要。     

超细炸药粉体团聚-分散机理研究

通过试验并运用粒子间力的理论对HNS超细微粒团聚—分散机理进行了研究。结果表明：超声分散，表面活性剂包裹以及喷雾干燥可以满足HNS超细微粒分散的要求。