Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)     

Growth of CeO_2, Y_2O_3 Buffer Layers for YBCO Coated Conductor

~~Growth of CeO_2, Y_2O_3 Buffer Layers for YBCO Coated Conductor     

催化部分氧化法制氢的水碳比控制与探讨

简要介绍了国内少有的干气催化部分氧化转化制氢工艺,重点讨论了转化水碳比的控制条件,对降低水碳比操作进行了有益地探讨。     

用步进电机实现连续变焦距光学镜头的变焦控制

根据望远镜的工作原理，对变焦距光学镜头的变焦运动进行了定性分析，并且根据理想光学系统的物像关系式推导出该镜头运动镜组的运动方程。该连续变焦控制的实验装置包括步进电机，电机驱动器以及控制平台，其控制程序用VisualC 编写。实验表明，该方法能方便地实现连续变焦距光学镜头的变焦控制。     

浅谈移动通信基站天线系统设计

对基站天线的基本原理、天线选型、天线参数设置、天线安装等方面进行了描述，对天线下倾角、分集距离等进行了重点讨论。     

火控雷达诱饵系统角度自动控制

在现役雷达抗反辐射导弹的各种措施中,为雷达配置诱饵是较有效、可行的一种。介绍了两点源诱偏的原理,对利用同一类型退役火控雷达作非相干诱饵进行了探讨,提出了一种火控雷达诱饵系统角度自动控制的方法。     

纯铜双层辉光离子渗钛组织形成机理及性能分析

采用双层辉光离子渗金属技术对纯铜进行了渗钛处理。用配有能谱仪(EDS)的扫描电子显微镜(SEM)、X射线衍射仪和透射电子显微镜对合金层的显微组织形貌、钛含量分布、相组成及相结构类型进行了观察与测定，对合金层的形成机理进行了探讨，并对其性能进行了对比测定。结果表明：渗钛层由合金层和扩散层组成，合金层主要由TiCu (Cu)固溶体 TiCu4构成，TiCu4为Dla型有序相，TiCu为B2型有序相，扩散层为(Cu)固溶体。渗钛处理后纯铜的表面得到显著强化。     

Time-domain measurements with the Hewlett-Packard network analyzerHP 8510 using the matrix pencil method

The generalized pencil of function (GPOF) method, also known as the matrix pencil method, is used to improve the resolution of HP 8510B network analyzer data in the time domain. This method provides for much higher resolution than the Fourier techniques. A comparison of the two methods is given for the example of the Beatty standard. The examples show that a parametric technique such as the GPOF can provide accurate and reliable results with a high degree of resolution even when the fast Fourier transform (FFT)-based technique fails     

Gamma-Ray-Induced Multi-Effect on Properties of Chalcogenide Glasses

Gamma-ray irradiations induced various alterations in sulfur- and selenium-based chalcogenide glasses. The absorbed dose was in the range of 0.01–3.6 MGy. The glasses exhibit prominent sensitivity to γ-ray irradiation, characterized by changes in some of the physical properties of the glasses, e.g., optical transmission, optical band gap, density, and thermal expansion coefficient. The effects on glass structure and microscopic morphology were also studied by Raman spectra and scanning electron microscopic observations.     

临床检验实验室自动化与实验室国际标准化认可的准备

临床检验实验室的自动化集中管理（LAS）及实验室的认可是目前临检专业讨论比较集中的问题.与传统的实验室比较分散、各自独立的分析设备相比,LAS具有集成度高,能够充分利用检验设备资源,与临床信息系统（CIS）联系更密切的特点.本文就实际临床检验中心投入的实验室集中管理系统,对其结构、流程设计、以及导入自动化系统前后实验室改造所带来的变化进行了分析.