纯棉中粗厚织物短流程前处理工艺

对纯棉中、粗、厚织物短流程前处理的工艺条件，处方及效果作了全面介绍。     

采用轴径向技术有效解决固定床反应器阻力降的快速升高

讨论了固定床反应器阻力降快速升高的原因，介绍了用轴径向技术解决这一问题的原理及优点，及其在铁铬系变换催化剂和钴钼系耐硫变换催化剂反应器中的实际应用。     

电转化法转化钝顶螺旋藻转化条件的研究

确定了电转化法转化钝项螺旋藻S6-4的转化条件。无论受体是藻丝还是单细胞／藻丝段，钝项螺旋藻S6-4在对数生长期内，半致死电场强度无显著差别。实验表明以对数中期的螺旋藻用于转化为宜。当脉冲时间是5．0ms时，藻丝受体和单细胞／藻丝段受体的半致死电场强度分别是3．75—5．0kV／cm和3．1—4．4kV／cm，而电击缓冲液分别是1．0mmol／L HEPES(pH7．5)缓冲液和含有0．5mol／L蔗糖的1．0mmol／L HEP—ES(pH7．5)缓冲液。本文的研究结果为螺旋藻转化及外源基因表达提供了实验基础。     

Access-mode predictions for low-power cache design

An access-mode prediction technique based on cache hit and miss speculation for cache design-achieves minimal energy consumption. Using this method, cache accesses can be adaptively switched between the way-prediction and the phased accessing modes.     

Element Importance and System Failure Frequency of a 2-State System

This paper redefines three measures of element s-importance for 2-state systems regardless of s-coherence, presents the calculation methods of these measures, and gives a new method to calculate the system time-specific failure and recovery frequencies. A poor point in the literature in extending methods for evaluating the s-importance of elements of s-coherent system to non-coherent system is pointed out. An example illustrates these definitions and calculation methods.     

多任务调度算法在单片机控制系统中的应用

为了满足单片机控制系统的复杂要求 ,提出了多任务调度算法 ,通过与单任务程序结构的对比和分析 ,详细说明了多任务调度算法的实现 ,指出了应用该算法的必要性 ,并且以科研生产的实例说明其具体应用。     

Formal Analysis of Streaming Downloading Protocol for System Upgrading

For a PC-mobile download system which is embedded with streaming download protocol, there are problems that the data cannot be transmitted correctly from the PC to the mobile, or the transmission is unacceptably slow. To solve these problems, we carry out a formal analysis for the protocol with some timing parameters and a given probability of message loss and unordered data using a probabilistic model checking tool PRISM. We introduce a technique to reduce the state space of the system modeling the protocol which is a network of probabilistic timed automata. The experimental results in PRISM give us a clear explanation to the problems, and are helpful in identifying the optimal parameter settings to meet industrial requirements.     

EXPERIMENTAL INVESTIGATIONS ON DIFFUSION CHARACTERISTICS OF HIGH CONCENTRATION JET FLOW IN NEAR REGION

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｒｅｓｅａｒｃｈｏｆｊｅｔｉｓａｎｉｍｐｏｒｔａｎｔｆｉｅｌｄｉｎｆｌｕｉｄｍｅｃｈａｎｉｃｓ.Ｉｔａｌｓｏｈａｓｍａｎｙａｐｐｌｉｃａｔｉｏｎｓｉｎｅｎｇｉｎｅｅｒｉｎｇ ,ｆｏｒｅｘａｍｐｌｅ ,ｔｈｅｄｉｓｃｈａｒｇｅｏｆｐｏｌｌｕｔａｎｔａｎｄｃｏｏｌｉｎｇｗａｔｅｒｉｎｉｎｄｕｓｔｒｉｅｓ .Ｗｈｅｎｔｈｅｉｎｉｔｉａｌｄｅｎｓｉｔｙｏｆｔｈｅｊｅｔｉｓｄｉｆｆｅｒｅｎｔｆｒｏｍｔｈａｔｏｆｔｈｅａｍｂｉｅｎｔｗａｔｅｒｂｏｄｙ ,ｔｈｅｊｅｔｗｉｌｌｂｅａｆ…     

多功能半导体激光医疗仪电源的研制

根据“多功能半导体激光医疗仪”整机的要求,采用同一电源对667nm和808nm半导体激光器实施供电。为避免电源在开、关机时对半导体激光管产生浪涌冲击,电源在设计中采用了适当的逻辑功能。并可保证对667nm激光器供电时,即使打开808nm激光器供电开关,也不对808nm半导体激光器供电,反之亦然。电源设有手动、计算机两种控制方法,及恒定功率、电流两种工作方式。