Ultrastructure of ischemic contracture of the left ventricle ("stone heart")

Myocardial biopsies from two patients who had developed "stone heart" (myocardial rigor mortis; ischemic contracture of the left ventricle) were studied by electron microscopy. The ultrastructure of tissue in stone heart, though ischemic in nature, differed from that of classic myocardial infarction in some respects. Apart from depletion of glycogen and distension of the sarcoplasmic reticulum and T-tubules, myofibrillar degeneration was much more widespread. Mitochondrial degeneration with active lysosomal autodigestion, disruption of the microcirculation, and lymphedema were prominent changes also observed. In the light of known clinical and experimental observations, our findings suggest that stone heart is an accelerated form of ischemic injury occurring in vulnerable (hypertrophied) hearts and is probably related to ischemia-triggered release of endogenous catecholamines.     

Abnormal growth of austenite grain of low-carbon steel

Niobium is an important alloying element for the steel. To know further the effect of Nb in the steel, the contrast experiments on the austenite grain growth of the 0.015%Nb and free Nb steels were carried out using Gleeble 1500 thermomechanical simulator. The experimental results indicate that the austenite grain of 0.015%Nb steel is finer than that of Nb free steel at 1150–1230 °C. And when the heating temperature arrives the critical temperature 1240 °C, the austenite grain of Nb steel suddenly grows up, while the austenite grain of Nb free steel changes little. Finally, the austenite grain of Nb steel is obviously coarser than that of Nb free steel. By transmission electron microscopy (TEM) using a carbon extraction replica technique, the precipitates of Nb(C,N) were not observed in the 0.015%Nb steel. It is concluded that the grain-boundary internal adsorption of Nb atoms leads to the result.     

Effects of numerical formulation on magnetic field computation using meshless methods

Meshless methods have some advantages over their counterparts such as the finite-element method (FEM). However, existing meshless methods for computational electromagnetic fields are still not as efficient as FEM. In this paper, we compare two meshless methods of discretizing the computational domain of Poisson-like problems; namely, the point collocation and Galerkin methods (which use the strong and weak forms of the governing equation respectively), and their effects on the computational accuracy and efficiency of the magnetic fields. We also discuss methods of handling discontinuities at the material interface. We present several examples, which also provide a means to validate and evaluate both meshless methods. Exact solutions and/or FEM are used as a basis for comparison. In addition, we also verify the results by comparing computed magnetic forces against those measured experimentally.     

Numerical evaluation of the effects of friction and geometric nonlinearities on the energy release rate in three- and four-point bend end-notched flexure tests

Nonlinear finite element analyses are used to examine the effects of friction and geometric nonlinearities on the energy release rate in three- and four-point bend end-notched flexure tests. Energy release rates are first determined by a recently developed direct energy balance approach. It is shown that the finite diameter loading rollers that are typically used in practical test set-ups cause both tests to be inherently nonlinear. The effect of these nonlinearities on the energy release rate is shown to be larger in the four point than the three point test and to increase with increasing roller diameter, increasing coefficient of friction along the crack plane, and decreasing supporting span length. For the four point test, the effect of these nonlinearities is also shown to increase with increasing ratio of inner to outer span length. Next, energy release rates at the onset of crack advance are determined by a simulated compliance calibration technique. This “perceived toughness” is compared with predictions of the “true toughness” given by the direct energy balance approach at the same load. It is shown that perceived toughnesses from this simulated compliance calibration procedure are larger than previously reported results that were obtained in a similar fashion using linear theory. In addition, the perceived toughness is shown to strongly depend upon the range used for fitting the load versus deflection data to obtain compliance. These findings are used to make some general recommendations regarding use of the two test methods and their associated data reduction techniques.     

论抵押权物上代位的范围

物上代位性是物权的重要特征，抵押权作为支配标的物“交换价值”的担保物权，当然也有物上代位性。本文在比较分析世界各国所规定的抵押权物上代位的范围的基础上，探讨了我国抵押权物上代位的范围及其合理性，以期能对完善我国民法典中抵押权物上代位范围的立法有所裨益。     

安钢高线品种开发的优势与实践

介绍了安钢高线的技术装备、工艺转化及创新，以及自投产以来的产品结构调整和重点产品的开发情况。     

Aspects of microstructure in low carbon steels produced by the CSP process

The solidification structure, microstructure evolution during rolling and precipitates with nanometers in dimension of the low carbon steels produced by CSP process with thin slabs have been studied in recent years. Important differences in microstructure and mechanical properties between the CSP products and the conventional one were observed. These differences may arise from the much rapider solidification rate and cooling rate after casting of the thin slabs. Some aspects of the microstructure for the low carbon steels of the CSP thin slabs are summarized and compared with the conventional one.     

Applications of optimal mathematic-physical models in metallurgical manufacture scheduling system at Baosteel

The transfer of mass flow between ironmaking and steelmaking process at Baoshan Iron and Steel Co. Ltd. has been analyzed. The mathematic-physical models of transport scheduling for hot metal manufacturing have been researched combined with the practical problem in the metallurgical manufacture procedure. Taking into account these models, the scheduling software has been designed, programmed and tested on-line. The new automation system of production scheduling has been implemented successfully at Baosteel, which produces a great economic benefit.     

在Windows下使用五笔字型输入法常见问题及解决方法

讨论了98王码WB9801五笔字型输入法软件在Windows环境下使用时应注意的问题、出现异常现象的解决方法及使用技巧。     

边界点集规划与注塑模具浇口位置的优化

根据平衡流动路径特点，提出了以理想流动模式为目标、基于制件边界几何信息的浇口位置优化选取的原则；并以平板制件单浇口注射成型工艺为例，研究了最佳浇口位置的描述方法并建立了相应的数学模型，给出了优化算法及制件边界特征点集的规划提取方法；根据所建数学模型和所选用优化计算方法，开发了相应的计算软件，经实例验证，算法和模型可靠。