Humidity sensitivity of polypyrrole and polypyrrole/SBA‐15 host–guest composite materials

Polypyrrole (PPY) and PPY/SBA‐15 host–guest composite materials have been prepared using chemical synthesis route and characterized by XRD, IR, N₂ adsorption–desorption isotherms, and SEM. The humidity sensitive properties (HSP) of this kind of materials have been studied by analyzing the variation curve of impedance as a function of relative humidity. It was found that the PPY/SBA‐15 host–guest composites materials exhibit better HSP than that of the corresponding pure PPY. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3301–3305, 2006     

半导体TiO2的光催化性能及其应用

TiO₂作为一种优秀的光催化材料，其在环境保护等领域的应用研究十分活跃，主要是在废水处理、空气净化、癌症治疗以及杀菌消毒等方面。介绍了新颖的光诱导超亲水性及其应用。     

Coordinated formation pattern control of multiple marine surface vehicles with model uncertainty and time-varying ocean currents

This paper presents a data-driven modeling and optimization method for cavity filters, according to a limited amount of measurement data. In the method, a model that reveals the effect of mechanical structure on electrical performance of cavity filters is firstly developed by an improved algorithm, which can increase the modeling accuracy of small data set by incorporating multi-kernel and prior knowledge into the framework of linear programming support vector regression. Then, an approach to optimize the structure of cavity filters is formulated by using the developed data-based model, and the obtained results can assist the fabrication of the same filter in the future. Some experiments from a synthetic example and a practical application of cavity filter have been carried out, and the experimental results confirm the effectiveness of the method. The model is particularly suited to a computer-aided manufacturing of volume-producing filters, and the proposed algorithm shows great potential in some applications where the experimental data are very few and the prior knowledge is available.     

个人洗护用品配方原理及应用技术(Ⅱ)--护肤品配方原理及应用

从护肤品配方原理、各类配方成分(如乳化剂)介绍和其应用等方面讨论护肤品开发应用的相关注意要点，并给出了参考配方。     

改性低毒脲醛树脂的合成及性能研究

采用六亚甲基四胺做催化剂，加入聚乙烯醇（PVA）、三聚氰胺和硫脲作为改性剂，通过降低甲醛与尿素物质的量比、采用尿素分批加入的合成方法，制备出改性低毒的脲醛树脂（UF），使游离甲醛质量分数低于0．30％；采用捏合和模压成型方法，将改性和普通UF树脂分别与剑麻纤维（SF）制备UF／SF共混复合材料，研究了复合材料的力学性能和吸水性能。结果表明，甲醛和尿素物质的量比为1．1时，游离甲醛质量分数降低到0．16％；甲醛和尿素物质的量比为1．2时，三聚氰胺、PVA及硫脲加入量分别为尿素总量的2．0％，1．5％，1．0％（质量分数）时，游离甲醛质量分数降低到了0．10％，粘度达到0．41Pa·S，贮存期大于80d；改性UF／SF复合材料的性能比普通UF／SF复合材料的冲击性能和耐磨性能分别提高了114％和261％。     

钛系聚酯催化剂的研究进展

介绍了聚酯催化剂中锑、锗、钛三个系列的各自特点，综述了复合型钛系和超细TiO2型聚酯催化剂的最新进展，认为新型钛系催化剂催化活性更高，更环保，而且用它合成的聚酯产品色相好，热稳定性得到了改善。     

N,N′-乙撑双[N(乙磺酸钠)-十二酰胺]的合成与性能评价

以乙二胺、2-氯乙基磺酸钠、月桂酸等为原料合成了N,N′-乙撑双[N(乙磺酸钠)-十二酰胺](简记为DTM-12)。以IR和1HNMR对其结构进行了初步表征。该目标产物水溶液的CMC(0.5 mmol/L)分别是十二烷基硫酸钠和十二烷基磺酸钠的1/16和1/20,γCMC(29.7 mN/m)低8~9 mN/m。DTM-12分别与十二烷基三甲基溴化铵(DTAB)和辛基酚聚乙氧基醚9-10EO(Triton X-100)组成的复配体系在摩尔比为3∶7时,CMC达到0.106和0.049 mmol/L,γCMC达到25.4和31.7 mN/m,优于十二烷基磺酸钠组成的复配体系。DTM-12还具有良好的起泡性和稳泡性。     

COMPUTER SIMULATION OF HYDRODEMETALLATION IN FIXED-BED REACTORS

An isothermal model for hydrodemetallation (HDM) of crude oils in catalytic fixed-bed reactors is proposed. This model involves a consecutive reaction mechanism, which is capable of accounting for particle deposit profiles with interior maxima. Consistent with the fact that HDM catalysts are conglomerates formed by precipitation, the porous catalyst itself is modeled as randomly overlapping spheres of equal size. The metal is deposited as growing metal sulfide crystallites on the inner surface of the catalyst. These crystallites originate from a certain number of randomly scattered nuclei and increase in size as the deposition proceeds. The random sphere model for the catalyst and the deposit provides the changes in the catalyst pore structure—local porosity and surface area.

The mass transport within the domain of the particle is due to restricted liquid diffusion, since the diameter of the metal bearing compound (porphyrin) and the intermediate are comparable to the pore size. The diffusion restrictions taken into account are the enhanced drag imposed on a molecule by adjacent pore walls and steric partitioning.

Since the deposition process is much slower than diffusion and reaction, the pseudo-steady-state assumption can be justified. The equations of conservation for mass are solved by orthogonal collocation on finite elements. Based on this solution technique a computer simulation program of HDM is designed that allows two modes of operation: constant temperature and constant conversion. The simulation program “SIMULA” is highly flexible with regard to reaction kinetics, catalyst structure, reactor design, and operating conditions. In comparison to a base case with uniform activity, the effect of intraparticle (radial) and bed (axial) activity profiles on the conversion rate is discussed. For the case investigated, a radial distribution of activity higher at the center of the particle than at the edge can increase catalyst life by 25%, but axial distribution was less successful.     

甲苯二异氰酸酯装置光气化反应精馏过程模拟优化

分析了光气化法生产甲苯二异氢酸酯(TDI)的工艺流程特点,建立了胺盐反应动力学模型,结合反应精馏塔的工艺参数及操作条件,胺盐的反应精馏塔进行模拟。考察了塔釜温度、侧线采出温度、塔釜停留时间和塔板停留时间的变化对胺盐转化率及再沸器热负荷的影响,得到了优化的参数,即塔釜温度150℃,侧线采出温度为92℃,塔釜停留时间20 min。优化结果使得胺盐转化率达到99.5%,为工业实际操作提供参考。