Highly ion-conductive solid polymer electrolytes based on polyethylene non-woven matrix

Highly ion-conductive solid polymer electrolyte (SPE) based on polyethylene (PE) non-woven matrix is prepared by filling poly(ethylene glycol) (PEG)-based crosslinked electrolyte inside the pores of the non-woven matrix. The PE non-woven matrix not only shows good mechanical strength for SPE to be a free-standing film, but also has very porous structure for high ion conductivity. The ion conductivity of SPE based on PE non-woven matrix can be enhanced by adding sufficient non-volatile plasticizer such as poly(ethylene glycol) dimethyl ether (PEGDME) into ion conduction phase without sacrificing mechanical strength. SPE with 20 wt.% crosslinking agent and 80 wt.% non-volatile plasticizer shows 3.1 × 10⁻⁴ S cm⁻¹ at room temperature (20 °C), to our knowledge, which is the highest level for SPEs. It is also electrochemically stable up to 5.2 V and has high transference number about 0.52 due to the introduction of anion receptor as an additive. The interfacial resistance between Li electrode and SPE is low enough to perform charge/discharge test of unit cell consisting of LiCoO₂/SPE/Li at room temperature. The discharge capacity of the unit cell shows 87% of theoretical value with 86% Coulombic efficiency.     

Effects of silicone oil and polymeric modifiers on the mechanical properties of highly filled LLDPE

The effects of coupling agents, silicone oil, and three types of polymeric modifiers on the mechanical properties of linear low density polyethylene (LLDPE) composites highly filled with aluminium hydroxide [Al(OH)₃] were studied. Polymeric modifiers that contain polar groups, such as silane‐grafted polyethylene (Si‐g‐PE) and acrylic‐acid‐grafted ethylene‐vinyl acetate copolymer (AA‐g‐EVA), improve the mechanical properties dramatically, while nonpolar modifiers improve them to some extent. When Al(OH)₃ was treated using a titanate coupling agent, the silicone oil increased the impact strength and elongation at break of the LLDPE/Al(OH)₃ composites. Introduction of a polymeric modifier containing polar groups destroys the beneficial effects of silicone oil on film mechanical properties, while the introduction of a nonpolar elastomeric polymeric modifier retains the high impact strength and elongation at break. SEM analyses provide the indirect evidence of the encapsulation of silicone oil around the filler. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 121–128, 2002     

Study of UAV tracking based on CNN in noisy environment

Multimedia Tools and Applications - Recently, there are lots of tracking methods proposed to improve the performance of visual tracking in videos with challenging situations, such as background...     

Robust Control of Networked System and Its Application

International Journal of Control, Automation and Systems - In this paper, the stability issue of networked system with dynamical topology in intelligent vehicle is studied. The systems are...     

基于粒子群优化BP神经网络的超声波缺陷位置预测

海洋设备的无损检测对于保障设备安全使用至关重要,由于设备所处的海洋环境特殊,要实现对海洋设备缺陷位置的准确估计难度较大.论文提出了一种基于粒子群优化BP神经网络(PSO-BP)预测设备缺陷位置的方法.通过模拟了海洋检测环境,用钢板作为实验对象,用超声波探伤仪对缺陷钢板进行了数据采集,获取了水下钢板的实时数据.通过粒子群算法对BP网络进行优化后对数据进行分析,对比缺陷出现的实际位置和预测位置,证明了粒子群优化的BP神经网络对于超声波检测的缺陷出现位置具有较好的预测效果.     

高职学院英语教师信息化教学能力提升策略研究

现代信息技术不断发展给传统的课堂带来了巨大的挑战.如何把信息技术与课堂教学相融合已经成为高职英语教师面临的重要课题.教师需要具备较强的信息化教学能力,才能满足现阶段高职英语教学的需要.文章以某高职学院为例,阐述了教师加强信息化教学能力的必要性,并简要概述了高职学院英语教师教学能力的现状,最后提出相应的提高策略.     

型钢混凝土框架桥受力特性的分析

目前框架桥结构主要是普通的钢筋混凝土框架结构,这种框架结构主要存在自重过大的问题,此问题导致顶进施工过程中土体的破坏和材料的浪费以及顶进施工难度的增加.本文提出用型钢混凝土结构代替框架桥中的普通钢筋混凝土结构,并用有限元软件Midas Civil对普通的钢筋混凝土框架桥和不同含钢率型钢混凝土框架桥进行了有限元的对比分析,对比两者在同等地质和荷载的条件下,所受内力和位移的情况.通过对比分析发现型钢混凝土框架桥结构是可行的,并得出了型钢混凝土框架桥含钢率的合理范围为5％～6％.     

基于MRIO与SNA的中国水资源空间转移网络分析

基于2002年、2007年和2012年的多区域投入产出表的相关数据,利用多区域投入产出(MRIO)模型和社会网络分析法(SNA)分析了中国水资源流动网络的空间关联性和结构特征。结果表明:网络中的链接数量没有随水足迹贸易值的增加而增加,链接路径上的流量不断增加,网络的韧性不够,空间关联渠道有待拓展,存在一定的等级差异,稳定性需要加强;网络中一些省份链接的增加,会削弱其他省份的链接数目,这种可塑性特征有利于在全国范围内合理配置水资源;将网络划分为4个板块,板块间的溢出关系主要是以板块内部为主,且少数板块之间没有任何的溢出关系。     

Dynamic buffering performance of the honeycomb paperboard filled with polyurethane

A new kind of composite buffering material was made by filling the voids of honeycomb paperboard with polyurethane. Drop tests were performed to evaluate the dynamic energy absorption capacity of the material. Based on the tests results, we analyzed the mechanical behaviors of the material under different conditions and obtained the inherent influencing laws of some factors on the material＇s dynamic buffering performance. It was shown that the dynamic buffering performance varied directly with impact velocity, and inversely with the void diameter, thickness and buffeting area of the composite material.