Differential diagnosis of the level of traumatic damage of cervical spinal nerves and brachial plexus

In 80 patients with paresis or paralysis of the upper extremity due to injury to the brachial plexus or cervical roots, EMG with muscular test, skin thermometry and radiculography were done. The comparison of EMG investigations and Lovett's test with the diagram of segmental and peripheral innervation gave only an approximate determination of the level and extent of injury. Skin thermometry demonstrated vasomotór disturbances in 330 patients. Vasodilating activity was present, in the first place, in patients with complete paralysis of the extremity. These cases showed no significant improvement after rehabilitation management. Radiculography permitted to determine exactly the number of damaged spinal nerve pouches and this damage was found in 16 out of 18 patients. The character and location of pain in the upper extremity were without any significant diagnostic value in relation to the site and degree of injury.     

Structure of poly(acrylic acid)–Hf,Ti,Zr(IV) chloride gels and their potential application in dentistry

Poly(acrylic acid) [poly(polypropenoic acid)] (PAA) can form stable and insoluble, colorless hydrogels with HfCl₄, TiCl₄, and ZrCl, in water. Two carboxylic groups of PAA are complexed by the M(OH)₂²⁺ ions. Hydrogels formed from PAA–MCl₂,(OH)₂, (where M = Hf, Zr) (2 : 1) have found practical application in the blocking of microscopic channels in tooth dentin, and thereby decrease the fluid permeability and protect against tooth decay. © 1996 John Wiley & Sons, Inc.     

Fluorine-Containing Drug Administration in Rats Results in Fluorination of Selected Proteins in Liver and Brain Tissue

In many pharmaceuticals, a hydrogen atom or hydroxyl group is replaced by a fluorine to increase bioavailability and biostability. The fate of fluorine released from fluorine-containing drugs is not well investigated. The aim of this study was to examine possible fluorination of proteins in rat liver and brain after administration of the fluorinated drug cinacalcet. We assigned 18 Wistar rats to a control group (n = 6) and a group treated with cinacalcet (2 mg kg⁻¹/body weight, 5 days/week), divided into 7 day (n = 6) and 21 day (n = 6) treatment subgroups. Fluorinated proteins were identified using a free proteomics approach; chromatographic separation and analysis by high-resolution mass spectrometry; peptide/protein identification using the Mascot search algorithm; manual verification of an experimentally generated MS/MS spectrum with the theoretical MS/MS spectrum of identified fluorinated peptides. Three fluorinated proteins (spectrin beta chain; carbamoyl-phosphate synthase [ammonia], mitochondrial; 6-phosphofructo-2-kinase/fructose-2, 6-bisphosphatase 1) were identified in the liver and four (spectrin beta chain, dihydropyrimidinase-related protein 4, prominin-2, dihydropyrimidinase-related protein 4) in the brain tissue after 21 days of cinacalcet treatment, but not in the control group. Introduction of fluorine into an organism by administration of fluorinated drugs results in tissue-specific fluorination of proteins.     

Influence of megaplastic deformation on the structure and hardness of Al–Cu–Mg alloy after aging

Methods of electron microscopy and X-ray diffraction have been used to investigate structural and phase transformations in the aluminum alloy of grade A2024 (Al–4.5 Cu–1.37 Mg–0.61 Mn–0.07 Si–0.27 Fe–0.02 Zn–0.02 Ti (wt %)) after aging and deformation by shear under high quasi-static pressure. It has been shown that the combination of two-stage aging with megaplastic deformation leads to the refinement of the structure to a nanolevel and to strengthening of the alloy (to an increase in the microhardness to 3000 MPa). The values of true deformation at which the deformation-induced dissolution of the particles of the strengthening S phase occurs have been determined.     

Accelerated weathering of pectin/poly(vinyl alcohol) blends studied by spectroscopic methods

The blends of pectin (PEC) and poly(vinyl alcohol) (PVA) at different components ratios were prepared by mixing in water. Thin polymeric films of PEC/PVA blends and pure polymers were obtained by casting method. All samples were then artificially aged using Suntest apparatus (Atlas) up to 780 h. The changes in chemical structure during sample ageing have been monitored by infrared and ultraviolet‐visible absorption spectroscopies. The first stage of weathering (up to ～ 300 h) was very slow and alteration of chemical structure was negligible in all samples. Prolonged ageing (>300 h) caused more significant degradation processes. FTIR spectra exhibited the highest changes in hydroxyl and carbonyl band ranges indicating the efficient photooxidation of macromolecules. The mechanisms of the observed processes have been discussed. It was found that PVA undergoes faster photoxidative degradation than pectin aged at the same conditions. The PEC/PVA blends exhibited the improved resistance to weathering comparing with both polymers aged individually. Mutual stabilization effect can be explained by intermolecular interactions between PEC and PVA confirmed by spectroscopic methods. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Novel lanthanide salicylaldimine complexes with unusual coordination mode

The one-step metal promoted reaction between salicylaldehyde and 4-methyl-1,3-phenylenediamine in the presence of lanthanum(III) or gadolinium(III) nitrate yields new salicylaldimine complexes containing N,N′-bis(salicylidene)-4-methyl-1,3-phenylenediamine as a result of the [2 + 1] Schiff base condensation. The crystal structure of the gadolinium complex reveals a dinuclear species with four unionized ligands coordinating in the monodentate and bridging bidentate fashion, using exclusively the oxygens as donor atoms with the nitrogen atoms not being involved in coordination. The coordination number of nine is achieved by involving three bidentate nitrate counterions in the coordination sphere.     

Electropolishing and passivation of NiTi shape memory alloy

Electropolishing of NiTi alloy has been investigated. The influence of polishing bath composition and the operating conditions instead of the conditions of the process on the quality of the surface, evaluated by AFM and SEM methods, was established. Morphologically uniform surfaces were obtained only in the case of solutions containing hydrofluoric and sulfuric acids. Electropolished samples were sterilized and thermally passivated, then their corrosion resistance was measured in Tyrode's physiological solution. It was established that already after the electropolishing the corrosion resistance of NiTi alloy increases due to the spontaneously formed TiO₂ layer. The increase of the thickness of the layer during sterilization and thermal passivation causes further increase in the corrosion resistance.     

Numerical modeling of gland seal erosion in a geothermal turbine

Excessive erosion of the low-pressure rotor end gland seal of a 25 MWe geothermal turbine produced a partial loss of turbine vacuum that degraded cycle efficiency. This study used computational fluid dynamics (CFD) to identify the causes of erosion and the optimal steam seal system flow conditions for reducing the erosion problem. The predictions were based upon a numerical calculation using a commercial CFD code (Adapco Star-CD) to model the rotor end gland seal with a steam flow containing hard solid particles. The results confirmed that flow conditions play a major role in rotor gland seal erosion. By changing steam seal flow pressures to vary flow, it was confirmed that there is a threshold seal flow condition below which erosion does not occur, or is minimized. Optimizing the rotor end gland seal supply pressure and intercondenser pressure reduced the turbulent flow kinetic energy by 49%, with a corresponding decrease in the erosion rate of the rotor gland seal surface. The erosion rate is related directly to the particle velocity and turbulent flow kinetic energy. Recommendations are provided for adjusting the rotor end gland seal system to avoid erosion.