B4C涂层作为等离子体面对材料的一些性质

介绍了利用等离子喷涂设备,B4C/Cu梯度功能涂层及非梯度涂层的制备技术,在模拟实验装置中测量了在高能粒子(3 keV,D+)的作用下,B4C涂层的化学溅射产额、热解吸性能、热冲击性能及热导率.结果表明B4C是一种有希望为未来聚变装置中等离子体面对的材料.     

超塑20钢的空洞与断裂行为

本文在获取２０钢超塑性的基础上，对其空洞与断裂行为进行了研究，通过观察空洞的产生和测定空洞的长大，提出了一种超塑材料空洞的形核模型。研究确认，超塑２０钢的断裂由沿晶和穿晶两种断裂类型组成。     

Stochastic correlative learning algorithms

This paper addresses stochastic correlative learning as the basis for a broadly defined class of statistical learning algorithms known collectively as the algorithm of pattern extraction (ALOPEX) family. Starting with the neurobiologically motivated Hebb's rule, the two conventional forms of the ALOPEX algorithm are derived, followed by a modified variant designed to improve the convergence speed. We next describe two more elaborate versions of the ALOPEX algorithm, which incorporate particle filtering that exemplifies a form of Monte Carlo simulation, to exchange computational complexity for an improved convergence and tracking behavior. In support of the different forms of the ALOPEX algorithm developed herein, we present three different experiments using synthetic and real-life data on binocular fusion of stereo images, on-line prediction, and system identification.     

工业层析洗梯液回收套用的一种方法

以生产甲胺基阿维菌素苯甲酸盐精品的工艺——工业层析产生的洗梯液回收套用的过程为例，说明利用二元恒沸物的组成随压力的变化而变化的规律，对生产洗梯液进行有效、简洁、合理分离及套用的方法。     

漫步潮汕小故宫

潮汕民间流行一种说法：“朝州厝，皇宫起”只有身临其境，见识了潮汕的世家望族兴建的豪宅庄园，才知此话不含糊。     

Effect of the graft yield of maleic anhydride on the rheological behaviors,mechanical properties,thermal properties,and free volumes of maleic anhydride grafted high‐density polyethylene

The rheological behavior, thermal properties, and molecular mobility of a series of maleic anhydride (MA) grafted high‐density polyethylenes were characterized and evaluated. The rheological behavior was studied with a Haake minilaboratory. The viscosity of the samples in their melt state decreased with an increase in the graft yield, and this could be attributed to the higher molecular mobility for samples with a higher degree of grafting. The thermal properties were investigated with dynamic mechanical analysis and differential scanning calorimetry. Positron annihilation lifetime measurements were used to study the effect of the degree of grafting on the chemical environment and the atomic‐scale free‐volume properties. It was found that the grafted MA group played a significant chemical inhibition role in positronium formation when the graft yield was low. The results also indicated that the higher the degree of grafting was, the broader the free‐volume distribution was. The relationship between the microstructure and rheological behavior is discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

论薄板坯连铸连轧产品质量优势

通过对薄板坯连铸连轧工艺的分析，深入研究了其产品的质量优势，同时还指出了在产品生产过程中需要重点注意解决的一些问题。     

硫含量对钴钼型耐硫脱氧剂的脱氧活性影响

研究了工艺气中硫含量对钴钼型耐硫脱氧剂脱氧活性的影响。通过常压微反 -色谱装置测定脱氧剂的本征脱氧活性 ,加压原粒度反应器测定脱氧剂的表观脱氧活性 ,结合实际经验确定了耐硫脱氧剂所需的最低硫含量。还讨论了温度、压力、空速对耐硫脱氧剂脱氧活性的影响。结果表明 ,耐硫脱氧剂完全能满足耐硫变换工艺的要求 ,而且有耐硫变换的作用 ,并对耐硫变换催化剂起到保护作用     

生烃化学动力学在川东北普光气田的应用

普光气田是四川盆地近期发现的规模最大、埋藏最深、资源丰度最高的气田。通过认识普光气田各个烃源岩层的贡献量、生烃关键期与构造演化的关系、油气成藏具体模式等，建立生烃化学动力学模型、标定参数，结合地区烃源岩参数和地史、热史资料，定量描述该地区的生烃过程及油裂解成气过程。认为：普光地区的主力烃源岩为下志留统泥岩；主要干酪根生油期为早二叠世末到早三叠世末期（距今286Ma至240Ma）；主要干酪根生气期为中三叠世（距今240Ma至230Ma）；主要气源是原油后期热裂解气，原油裂解成气的时间比较晚，主要油裂解成气期为早白垩世（距今144Ma至97．5Ma），从而决定了普光气田的成藏模式为“多期成藏，油气转化，晚期定位”。图2表3参33     

近距离下覆4#煤层综采工作面顶板管理经验

介绍了近距离深层综采工作面顶板和巷道顶板管理经验，及综采工作面在通过巷道冒项区域时所采取的办法和措施。