Threshold and growth mechanism of fatigue cracks under mode II and III loadings

ABSTRACT The fatigue crack growth behaviour of 0.47% carbon steel was studied under mode II and III loadings. Mode II fatigue crack growth tests were carried out using specially designed double cantilever (DC) type specimens in order to measure the mode II threshold stress intensity factor range, ΔK_IIth. The relationship ΔK_IIth > ΔK_Ith caused crack branching from mode II to I after a crack reached the mode II threshold. Torsion fatigue tests on circumferentially cracked specimens were carried out to study the mechanisms of both mode III crack growth and of the formation of the factory‐roof crack surface morphology. A change in microstructure occurred at a crack tip during crack growth in both mode II and mode III shear cracks. It is presumed that the crack growth mechanisms in mode II and in mode III are essentially the same. Detailed fractographic investigation showed that factory‐roofs were formed by crack branching into mode I. Crack branching started from small semi‐elliptical cracks nucleated by shear at the tip of the original circumferential crack.     

EFFECTS OF VISCOSITY OF LIQUID FOODS ON PALATAL PRESSURE

The deglutition of non-Newtonian liquids introduced into the mouth was studied dynamically by measuring palatal pressure (P) with pressure transducers set at three locations on the palate. The value of P and the swallowing pressure (S) changed only from 100 to 200 g/cm² over the viscosity range 10⁻² to 10¹ Pa.s. The retaining time (T) and work (W), required for swallowing after the liquid entered the mouth, remained almost constant up to a critical value of 1.0 Pa.s. above which both T and W increased markedly. When the viscosity was low, all of the liquid was swallowed in one deglutition, up to 15 mL volume. Therefore, T was almost constant but S increased with the volume. When the viscosity was high, the liquid was swallowed in several smaller portions. When the volume was high, T increased and S was either constant or it decreased.     

One-Step Generation of Multiple Gene-Edited Pigs by Electroporation of the CRISPR/Cas9 System into Zygotes to Reduce Xenoantigen Biosynthesis

Xenoantigens cause hyperacute rejection and limit the success of interspecific xenografts. Therefore, genes involved in xenoantigen biosynthesis, such as GGTA1, CMAH, and B4GALNT2, are key targets to improve the outcomes of xenotransplantation. In this study, we introduced a CRISPR/Cas9 system simultaneously targeting GGTA1, CMAH, and B4GALNT2 into in vitro-fertilized zygotes using electroporation for the one-step generation of multiple gene-edited pigs without xenoantigens. First, we optimized the combination of guide RNAs (gRNAs) targeting GGTA1 and CMAH with respect to gene editing efficiency in zygotes, and transferred electroporated embryos with the optimized gRNAs and Cas9 into recipient gilts. Next, we optimized the Cas9 protein concentration with respect to the gene editing efficiency when GGTA1, CMAH, and B4GALNT2 were targeted simultaneously, and generated gene-edited pigs using the optimized conditions. We achieved the one-step generation of GGTA1/CMAH double-edited pigs and GGTA1/CMAH/B4GALNT2 triple-edited pigs. Immunohistological analyses demonstrated the downregulation of xenoantigens; however, these multiple gene-edited pigs were genetic mosaics that failed to knock out some xenoantigens. Although mosaicism should be resolved, the electroporation technique could become a primary method for the one-step generation of multiple gene modifications in pigs aimed at improving pig-to-human xenotransplantation.     

Kinetics of the methanation of carbon dioxide over a supported Ni-La2O3 catalyst

The kinetics of the methanation of carbon dioxide was investigated using an alumina supported Ni-La₂O₂ catalyst in a differential and integral reactor. In the differential reactor the molar ratio of H₂ to CO₂ was varied from 0.6 to 30. In the integral reactor the rates were measured with up to 90% conversion. Both reactor tests were carried out at temperatures between 513 and 593 K. The experimental results were described by a Langmuir-Hinshelwood type equation. The kinetics can be explained by assuming equilibrium of dissociative carbon dioxide and hydrogen adsorption, and assuming hydrogenation of surface carbon as the rate determining step.     

Observation of 3‐D Structure of Bubbles in a Fluidized Catalyst Bed

The interface area between the bubble and emulsion phases in a fluidized catalyst bed is one of the important parameters used to analyze and design the fluidized bed reactor. We used a fast‐scanning X‐ray CT system to observe the bubble shape and structure. We then obtained the transient 2‐dimensional cross sectional gas‐phase distribution in a fluidized catalyst bed. Using image‐processing techniques, pseudo 3‐dimensional images of the bubbles were reconstructed. The bubble structure was studied based on the 3‐dimensional images and the previously obtained results in a 2‐dimensional fluidized bed. It was found that the bubble shape was not spherical but complicated, and that the bubbles ascending in a fluidized catalyst bed consisted of some smaller bubbles.     

Fe-Cr-Mn奥氏体合金的辐照体胀与诱起晶界偏析行为的研究SCIEI

本文采用电子束辐照,研究了Fe-15Cr-xMn合金以及添加W,V合金的孔洞体胀和诱起晶界偏析行为,并对包含晶界在内的辐照区进行成分分析。结果表明,在Fe-Cr-Mn系合金中孔洞体胀孕育期可以被强烈抑制,晶界偏析也减少。特别是,合金中添加W,V效果更加明显。用Mn代替Ni,通常要发生体胀和相的不稳定性,由于反Kirkendall效应导致Ni和Mn的扩散行为不同,使Fe富集在尾闾处,局部地区形成铁素体,有利于减少体胀和晶界偏析。     

展望21世纪新技术革命中的传感器

在回顾了以往产业革命中传感器的作用 ,比较工程传感器与人的感官的异同点之后 ,阐述了预计将于 2 1世纪爆发的新产业革命中传感器的使命及发展趋势     

双束强辐照对氧化物弥散强化铁素体型合金强化相稳定性影响

采用双束复合辐照装置,研究了He存在条件下,强辐照对长期时效后的ODS合金中强化相(Y2O3)的稳定性和辐照损伤特征的影响。实验结果表明:双束强辐照下,ODS合金中强化相不稳定,发生聚集长大并造成附近基体中Ti、Y浓度增高,导致空洞尺寸和空洞肿胀增加,并对这一结果从理论上进行解释。     

Iron Loss Analysis of Permanent Magnet Motors Fed by PWM Inverter

Carrier harmonic losses that consist of iron loss, eddy current loss, and ac copper loss are produced in a permanent magnet machine driven by a PWM inverter. It is already known that a higher motor inductance can lead to lower carrier harmonic losses. This paper investigates the carrier harmonic loss composition of two motors with identical dimensions but different inductances. The results of finite element analysis (FEA) showed that the eddy current loss in the iron core accounts for most of the carrier harmonic loss. It is also shown that the carrier harmonic loss of the iron core is quantifiable using theoretical calculations.     

污水处理排放水对小流量河流水体生态的影响

针对日本国鬼怒河流域小流量河流,通过对河床上附着生物膜的组成、底栖生物、细菌活性分析和AGP试验,研究了污水厂二级处理排放水对小流量河流生态的影响.研究表明,当污水厂二级处理排放水占河流流量比例较大时(研究河流所占比例为35%),同样会引发河流富营养化和影响河流水体的生态.因此,从保护水环境及其生态考虑,有必要对污水进行深度处理.