Long-term stability of an Au/Al2O3 catalyst prepared by incipient wetness in continuous-flow glucose oxidation

A 0.3% Au/Al₂O₃ catalyst prepared by the incipient wetness (IW) method was investigated in the continuous-flow liquid-phase glucose oxidation. Therefore, a continuous stirred tank reactor (CSTR) system equipped with an ultrasonic separator was used. The continuous-flow glucose oxidation was carried out at 40 °C, pH 9 and 1 bar oxygen partial pressure. Residence time and glucose concentration were varied. The IW gold catalyst showed very high activity and selectivity to gluconic acid within its 110 days of operation and, thus, an excellent long-term stability. Even after severe microbial contaminations of the catalyst, its activity could be completely restored by in situ regeneration with 2-propanol.     

Creutzfeldt-Jakob disease: neurophysiologic visual impairments

OBJECTIVE: The predictive value of electrophysiologic visual testing in Creutzfeldt-Jakob disease (CJD) was investigated, and the retinal pathologic findings in three cases are reported. BACKGROUND: The fatal prognosis of CJD, its transmissibility, and the lack of treatment make early diagnosis essential in averting human-to-human transmission. Electroretinogram and visual evoked potentials have been studied in few cases of CJD. METHODS: A visual electrophysiologic examination was performed in 41 consecutive patients referred with suspected CJD. The disease had been diagnosed in 24 patients (CJD group; 15 were confirmed neuropathologically and 9 by clinicolaboratory methods in accordance with diagnostic criteria). The remaining 17 patients were diagnosed with other neurologic disorders, and served as a control group. RESULTS: Flash electroretinogram revealed a significant decrease in the amplitude of the B1 wave (<60 microV) and the B/A ratio (<2) in the CJD group compared with those in the control group. Flash visual evoked potentials revealed no significant difference in latency, but amplitude was increased (>10 microV) in the CJD group, especially in patients with myoclonus. CONCLUSIONS: The visual electrophysiologic abnormalities provide an interesting noninvasive diagnostic tool in idiopathic CJD. The B1-wave decrease is closely correlated with the outer plexiform layer abnormalities observed on neuropathologic examination.     

Clinical case of the month. Metastatic endocarditis: clinical observation and review of the literature

The authors describe a case of metastatic endocarditis associated with a gastric carcinoma. The diagnosis was made early and the treatment by surgery and chemotherapy allowed a survival of 18 months, which is unusually long. The differential diagnosis is discussed and includes nonbacterial thrombotic endocarditis, infectious endocarditis and primary tumors of the heart.     

Optimization of the grapes reception process

Neural Computing and Applications - Grapes reception is a key process in wine production. The harvest days are extremely challenging days in managing the reception of the grapes, as the winery...     

Identifying the criterion spontaneously minimized during the take-off phase of a sub-maximal long jump through optimal synthesis

Optimal synthesis of human movement or the prediction of the kinematics of a new movement require not only that the multi-body system be modeled but also that a performance criterion is specified. For sub-maximal movements the selection of a suitable performance criterion, able to generate realistic dynamic behavior is difficult. A two-dimensional simulation model of the take-off phase of a sub-maximal long jump was developed to study the effect of criterion choice on the realism of simulated movements. A parametric optimization technique was employed to obtain solutions to the constrained equations of motion. Seven different criteria were evaluated, by comparing simulated movements with an actual performance, to identify the criterion which most closely approximated that spontaneously minimized by the athlete. Synthesis of the take-off phase of a sub-maximal long jump was found to be sensitive to the chosen criterion, with a criterion based on minimizing joint intersegmental forces found to perform well.     

Enterprise architecture,IT effectiveness and the mediating role of IT alignment in US hospitals

Despite the possible benefits of implementing healthcare information technologies, successful implementation of effective healthcare information technology is constrained by cultural and regulatory concerns and technical obstacles encountered when establishing or upgrading an organisation's enterprise infrastructure. In this paper, we advance Ross' four‐stage model of enterprise architecture maturity as a valuable IT resource for helping healthcare organisations sustain a competitive advantage. We use partial least squares (PLS) structural equation modelling to analyse survey data from 164 US hospitals at different stages of EA maturity. Our results provide evidence that enterprise architecture maturity directly influences the effectiveness of hospitals' IT resources for achieving strategic goals. Further, enterprise architecture maturity indirectly influences the effectiveness of IT resources when IT alignment is incorporated as a mediating variable. We discuss the implications of our findings for research and practice and suggest opportunities for future research.     

Preparation of Iron Filler-Based Photocomposites and Application in 3D Printing

The introduction of metallic fillers to polymers via the photopolymerization approach can endow the composite materials with some unique properties, but the relevant research is still scarce due to the issue of light penetration and inner filter effect. Herein, for the first time the fabrication of photocomposites based on fine iron powder (i.e., a typical kind of metallic filler) is reported in this work. The free radical polymerization of two different acrylate monomers, poly(ethylene glycol) diacrylate and trimethylolpropane triacrylate, is performed in the presence of iron filler under mild conditions (i.e., light emitting diode (LED)@405 nm irradiation at room temperature under air). And the real-time Fourier transform infrared spectroscopy reveals remarkable photopolymerization kinetics of acrylates with high final conversions and fast polymerization rates despite the increasing contents of iron filler in the composites. Interestingly, the 3D printing technique is applied to the iron filler-based composites to produce tridimensional patterns with excellent spatial resolution. This work not only paves the way for the investigation of photocomposites based on metallic fillers through photochemical methods, but also broadens the potential application prospects.