The Progress of a Microbeam Facility in the Institute of Plasma Physics

The progress of a microbeam facility in the institute of Plasma Physics was discussed in this paper.This kind of equipment can supply single-particle beam which may be implanted into cells in micrometer-radius and measured by a new outstanding detector among global microbeam systems.Measurements by some plain targets showed that the highest current after the accelerator tube can be larger than 20μA ,the H2^ current before the second bending magnet is near 0.9μA ,the current after the second bending magnet is near 0.8μA,and the current of the beam line(after a 2-mm diameter aperture)is near 0.25nA which is enough for the single-particle microbeam experiment.It took scientists 3 months to do their microbeam experiment after setting up the qccelerator beam line and get the microbeam from this equipment.Two pre0collimators were installed between the 2-mm diameter aperture and the collimator to survey the beam.Tracks on the CR39 film ectched in the solution of NaOH showed that the beam can go through the collimator including a 10μm diameter aperture and the 3.5μm thick vacuum sealing film(Mylar).A new method,which is called optimization of the beam quality,was put forward in this paper,in order to get smaller diameter of beam-spot in microbeam system.     

The Influence of Magnetic Permeability on the Configuration of magnetic Field in Helimak Device

The Helimak of USA is a plasma physics experimental device designed and built by CASIPP.Its configuration of magnetic field is of very importance during the operation of this device.In this paper,the influence of magnetic permeability on configuration of magnetic field will be discussed due to the effect of weld metal in the vacuum vessel of Helimak,and some conclusion is useful for some engineering designs of the fusion experimental device.     

电流互感器带电水冲洗试验研究及分析

带电水冲洗是对电力设备外绝缘净化的有效措施，但由于220kV塔型电流互感器结构特殊，容易发生冲洗闪络，成为开展220kV带电水冲洗的难点，我们通过试验；研究，初步掌握了塔型电流互感器的带电水冲洗特点。     

引风机轴向振动故障的诊断与分析

利用正向推理，在能够引起引风机振动故障的全部原因中，采取逐个排除的方法，找出引风机轴向振动故障所在，分析了振动的机理，并从相位出发，就如何对此类故障进行诊断与分析进行了讨论，对诊断引风机振动故障和提高诊断准确率具有一定的指导意义。     

火电厂大容量锅炉水冷壁的三机吊装

针对火电厂大容量锅炉水冷壁吊装困难的问题，对三机吊装方案进行理论研究，介绍了吊点位置选择、强度校核及吊点位置调整方法。利用绳索总长不变为控制变形协调条件来求解超静定问题，进而求得水冷壁的最大应力，进行强度校核。此方法对其他一些细长构件同样适用，具有一定的实用性。     

雷达阵地选择的多目标决策方法

分析了影响雷达作战效能的一些因素，利用层次分析法获得了影响作战效能因素的权重，提出了一种先局部优化再组合的决策方法，最后给出了应用算例．该方法为雷达阵地选择决策提供了一条新的途径．     

用计及机组动态时的潮流雅可比阵计算电压稳定极限

将证明：当计及发电机转子运动、暂态凸极效应、励磁系统和调速系统动态行为，负荷节点 用恒定阻抗与一台等值感应电动机模拟并考虑其机械暂态过程时，全系统线性化微分方程系 数矩阵不出现正实特征根的一个必要条件是，系统的两种潮流雅可比矩阵之行列式应具有相 同的符号。这一条件与现有判断电压稳定性的类似条件相比，在理论上完整且严格。应用这 一条件将可以按照给定的规则使运行方式逐步恶化，从而求出电压稳定极限。     

Li+嵌Al反应的热力学分析及实验研究

利用第一原理赝势平面波方法计算了Al-Li合金中3种平衡相AlLi、Al2Li3和Al4Li9的形成焓,得出AlLi相的形成焓最低,表明当Li 嵌入Al电极时,优先形成AlLi相。为了验证上述结论,将Al薄片与金属锂对电极组成扣式电池,对Al电极进行电化学性能测试和结构表征。实验结果与理论计算的结果相吻合,表明可以采用第一原理赝势平面波方法预测铝作锂离子电池负极时的电化学反应性能。     

基于P89LPC932A1的注射泵控制系统

以P89LPC932A1单片机为核心构建注射泵控制系统,线路简单,可靠性高;利用16键键盘作为输入,操作方便;LCM128645ZK显示模块功耗低,体积小。该系统能应用于医疗设备中的药物喷涂和电子元器件、印制电路板的喷涂以及防腐设备中。     

沃尔玛强制推行“电子标签”给中国供应商带来警示

“沃尔玛已经向供应商发出‘最后通碟’,要求从2005年1月1日开始,所有出口到美国商品的集装箱托盘都要使用电子标签。这种要求将很快波及到出口到美国的商品,而我国现在这项技术还处在研