Trans FA and solid fat contents of margarines marketed in Turkey

Trans FA (TFA), solid fat contents (SFC), and slip melting points of 12 different tub and stick margarines marketed in Turkey were examined in this study. No trans isomers were found in four margarines, which suggests they were formulated from interesterified or blended fats and oils. The products with no TFA generally had more short-chain saturated FA, which suggests coconut oil-based oil components. TFA content of the other 10 products varied from 7.7 to 37.8%. Compared to the products formulated in North America, Turkish margarines contain more TFA and have higher SFC.     

Phenolic profiles of Turkish olives and olive oils

Phenolic compound distribution of Turkish olive cultivars and their matching olive oils together with the influence of growing region were investigated. One hundred and one samples of olives from 18 cultivars were collected during two crop years from west, south and south‐east regions of Turkey. The olives were processed to oils and both olive and olive oil samples were evaluated for their phenolic compound distribution. The results have shown that main phenolics of Turkish olives were tyrosol, oleuropein, p‐coumaric acid, verbascoside, luteolin 7‐O‐glucoside, rutin, trans cinnamic acid, luteolin, apigenin, cyanidin 3‐O‐glucoside and cyanidin 3‐O‐rutinoside. Oleuropein and trans cinnamic acid were present in higher amounts among all phenolics. Principal component analyses showed that the growing region did not have drastic effect on phenolic profile of olives. The major phenolic compounds of olive oils were tyrosol, syringic acid, p‐coumaric acid, luteolin‐7‐O‐glucoside, trans cinnamic acid, luteolin and apigenin. Luteolin is a predominant phenolic compound in almost all oil samples. Total phenol concentrations of Southeast Anatolian oils were found to be lower than those of the other regions.     

Improvement of the production of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) terpolyester by manipulating the culture condition

BACKGROUND: The aim of this work is to enhance the production of terpolyester poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) (P(3HB‐co‐3HV‐co‐4HB)) produced by a locally isolated bacterium, Cupriavidus sp. USMAA2‐4. The monomer composition was varied by supplementing different carbon precursors and by manipulating the culture condition through one‐stage cultivation. The effect of C/N ratio and different concentrations of carbon source and precursors were investigated in order to produce higher content of this terpolyester. Although research on this biodegradable polyester is abundant, studies on terpolyester P(3HB‐co‐3HV‐co‐4HB) are still limited. RESULTS: Supplementation of oleic acid in accumulation medium increased the bacterial growth and polyhydroxyalkanoate (PHA) accumulation. It was also shown that medium consisting of assorted carbon precursors at C/N 20 gave relatively high dry cell weight and P(3HB‐co‐3HV‐co‐4HB) content. Various compositions of terpolyester were obtained when the concentration of oleic acid and 4HB precursors were manipulated. The combination of oleic acid with γ‐butyrolactone and 1‐pentanol was found to be the best combination to produce high PHA content (81 wt%). The composition of monomer in P(3HB‐co‐3HV‐co‐4HB) was produced in the range 8–13 mol% for 3HV and 9–24 mol% for 4HB, respectively. CONCLUSIONS: The production of P(3HB‐co‐3HV‐co‐4HB) in shake‐flasks successfully produced 81 wt% of PHA content. This manipulated culture condition can be used at larger scale to provide modeling for the production of terpolyester in a bioreactor. Copyright © 2012 Society of Chemical Industry     

An exploration of corrosion inhibition of mild steel in sulphuric acid solution through experimental study and Monte Carlo simulations

Abstract

4-[4-(1H-imidazol-1-yl)methyl)-1H-1,2,3-triazol-1-yl]methylbenzophenone (ITBP) and 4[4-(1H-1,2,4-triazol-1-yl)methyl)-1H-1,2,3-triazol-1-yl]methylbenzophenone (TTBP) are synthesized as new heterocyclic compounds of the triazole derivative family and tested successfully as potential inhibitors for MS in 1?M H₂SO₄ corrosive medium by using gravimetric analysis, electrochemical impedance spectroscopy, potentiodynamic polarization, and energy dispersive X-ray spectroscopy (EDX). Polarization curves show that the tested inhibitors are mixed-type inhibitors. Scanning electron microscopy (SEM) affirmed the existence of an adsorbed film on the steel surface. Monte Carlo simulations were in excellent agreement with the experimental tests.

Abbreviation: PDP: Potentiodynamic Polarization; EIS: Electrochemical impedance spectroscopy; DFT: Density functional theory; MC: Monte Carlo     

Transesterification of Palm-based Methyl Palmitate into Esteramine Catalyzed by Calcium Oxide Catalyst

The technology for transesterification reactions between methyl esters and alcohols is well established by using classical homogeneous alkaline catalysts, which provide high conversion of methyl esters to specialty or nonindigenous esters. However, in certain products where the purity of the esters is of concern, the removal of homogeneous catalysts after the completion of the reaction is a challenge in terms of production cost and water footprint. Therefore, a study to investigate the potential of heterogeneous catalysts was conducted on reactions between methyl palmitate and triethanolamine. The degree of basicity and active surface area of calcium oxide (CaO), zinc oxide (ZnO), and magnesium oxide (MgO) were first characterized by using temperature-programmed desorption (TPD-CO₂) and Brunauere–Emmett–Teller (BET), respectively. Among the metal oxides investigated, the CaO catalyst showed the best catalytic activity toward the transesterification process as it gave the highest conversion of methyl palmitate and yielded fatty esteramine compositions similar to the conventional homogeneous catalyst. The optimum transesterification condition by using the CaO catalyst utilized a lower vacuum system of approximately 200 mbar, which could minimize a considerable amount of energy consumption. Furthermore, low CaO dosage of 0.1% was able to give a conversion of 94.5% methyl ester and formed esteramine at 170 °C for 2 h. Therefore, the production of esterquats from esteramine may become more economically feasible through the methyl ester route by using the CaO catalyst, which can be recycled three times.     

Enhanced Hydrogen Generation from Empty Fruit Bunches by Charcoal Addition into a Downdraft Gasifier

Hydrogen production by co-gasification of empty fruit bunches of palm oil could be enhanced by adding charcoal. Physiochemical characterization of raw feedstocks was performed to determine their exergy potentiality. The raw feedstocks, gasified charcoal, and the end product of produced gas were analyzed by different techniques. Gasification experiments were performed using a pilot-scale downdraft gasifier. The heating value, composition of product gas, yield of hydrogen, and exergy efficiency were used to verify the improvement of hydrogen production during the co-gasification process. Charcoal with empty fruit bunches of palm oil leads to a much higher yield of hydrogen than lower charcoal ratios or solely empty fruit bunches. This enhanced hydrogen fuel can contribute to future energy demand.     

Yielding behaviour of thermoplastic/elastomer blends cured by gamma irradiation

Mechanical blends of thermoplastic medium density polyethylene (MDPE) and elastomeric ethylene propylene diene monomer (EPDM) have been prepared with a fixed composition of 60/40 wt%. They have been used either in their gum form or loaded with two different reinforcing fillers, high abrasion furnace (HAF) carbon black or precipitated SiO₂ (Hi Sil) of concentration 25–100 phr (parts per hundred parts of resin) with respect to the blend. Curing was achieved by gamma irradiation. Yielding properties (yield stress, yield strain and cold drawing) have been followed as a function of irradiation dose for different blend compositions. Yield stress values increased with irradiation dose and with the content of the reinforcing filler, but yield strain and cold drawing values decreased with irradiation dose and also with the filler content. The data obtained reveal that Hi Sil is more effective as a reinforcing filler, and the prepared blends are suitable for load‐bearing applications. © 2001 Society of Chemical Industry     

Thermomechanical effects in the torsional actuation of twisted nylon 6 fiber

Thermally induced torsional and tensile actuators based on twisted polymeric fibers have opened new opportunities for the application of artificial muscles. These newly developed actuators show significant torsional deformations when subjected to temperature changes, and this torsional actuation is the defining mechanism for tensile actuation of twisted and coiled fibers. To date it has been found that these actuators require multiple heat/cool cycles (referred to as “training” cycles) prior to obtaining a fully reversible actuation response. Herein, the effect of annealing conditions applied to twisted nylon 6 monofilament is investigated and it is shown that annealing at 200 °C eliminates the need for the training cycles. Furthermore, the effect of an applied external torque on the torsional actuation is also investigated and torsional creep is shown to be affected by the temperature and load. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45529.     

Effect of Ozonated Water Treatment on Fatty Acid Composition and Some Quality Parameters of Olive Oil

The organic olives from Çine-Ayd?n (Turkey) were washed with tap or ozonated water for 2 and 5 min, respectively, and pressed to olive oil. The effects of wash treatments on fatty acid composition and several quality parameters of the oils were determined. The maximum values after 2-min ozonated water washes were 9.58 meqO₂/kg, 0.73%, 2.44 and 0.16 for peroxide, free acid, K₂₃₂ and K₂₇₀ values, respectively, which were under the standard limits for extra-virgin olive oil. Five min of ozonated water washes also yielded acceptable results, except for a slight excess on K₂₃₂ value. Ozonated water washes had almost no effect on fatty acid composition.     

Effect of ambient conditions on drying of herbs in solar greenhouse dryer with integrated heat pump

An even span solar greenhouse dryer was built and applied to dry Java tea (Orthosiphon aristatus) and Sabah snake grass (Clinacanthus nutans Lindau). Findings showed that the solar greenhouse dryer performs satisfactorily during clear weather except at nighttime and rainy day due to product rehydration which is heavily influenced by high relative humidity from ambient air. Integrating of heat pump into the solar greenhouse dryer has successfully reduced the room relative humidity by 10–15%. Also, heat pump has mitigated the product rehydration issue by maintaining room relative humidity at maximum of 65% throughout the drying period. The drying rate of Java tea was improved three to fourfold, i.e., from 0.004–0.008 to 0.018–0.025?g H₂O/g DM min, whereas 10% of drying time was saved for both Java tea leaf and Sabah snake grass leaf with the assistance of heat pump system. Meanwhile, the supply of dry air from the heat pump system with a magnitude of 0.25–0.50?m/s helps in enhancing the drying rate of the herbs as well as minimizing the nonuniformity of drying temperature and relative humidity inside the solar greenhouse dryer.