Performance of Kenics static mixer over a wide range of Reynolds number

The present study deals with the numerical simulation of flow patterns and mixing behaviour in Kenics static mixer over a wide range of Reynolds number. Three different sets of Kenics mixer (aspect ratio = 1.5) comprised of 3, 9 and 25 elements each have been characterized. The Reynolds number was varied in the range of 1 to 25,000 (i.e., from laminar to turbulent flow regime). The numerical approach takes into account the aspects of the fluid flow at higher Reynolds number values including circumferential velocity profiles at different cross-sections within the Kenics mixer, which were neglected in previous studies. It was observed that cross-sectional mixing in the turbulent flow regime takes place up to 30% of each element length at element-to-element transition; beyond that velocity profiles were uniform. The experiments were also carried out to measure the circumferential and axial velocity profiles and pressure drop in three different Kenics Mixers using air as fluid. The pressure drop per unit element (ΔP/η) was found to be independent of the number of Kenics mixing elements used in the system. The total pressure drop across Kenics mixer obtained by CFD simulations were compared with the experimental pressure drop values and correlations available in the literature. The numerical results were found in good agreement with the experimental as well as the results reported in the literature. A new pressure drop correlation in the Kenics static mixer has been developed.     

Transient behaviour of a non-ideal tubular reactor

Experimental data are reported for the unsteady state behaviour of a laminar flow reactor with first order homogeneous liquid phase reaction. The data are in agreement with the predictions of the dispersion model, using previously reported reaction-dependent dispersion coefficients which directly gives the bulk mean concentration. The use of proper boundary conditions, ignored in a recent paper on this topic⁽¹⁹⁾, is found to significantly influence the predictions. Unlike the conclusion drawn in⁽¹⁹⁾ it is shown that the Taylor model is unable to correctly predict the reactor length for fast reactions even for high conversions.     

Low-K Dielectric Pocket and Workfunction Engineering for DC and Analog/RF Performance Improvement in Dual Material Stack Gate Oxide Double Gate TFET

Silicon - In this paper, we investigate the effect of low K dielectric pocket on DC and analog/RF performance in dual material stack gate oxide double gate tunnel field effect transistor. For this,...     

Captopril and its synthesis from chiral intermediates

Captopril is an antihypertensive agent that inhibits the angiotensin‐converting enzyme of the renin–angiotensin system. Chiral intermediates are used in the synthesis of the drug. These intermediates are obtained by resolution of racemic compounds or by chemical, biocatalytic methods and or by asymmetric synthesis by biocatalytic process. This article reviews the various chemical and biochemical processes involved in the synthesis of the chiral drug, including the pharmacological action of captopril. © 2001 Society of Chemical Industry     

Structural,optical, cytotoxicity,and antimicrobial properties of MgO,ZnO and MgO/ZnO nanocomposite for biomedical applications

In this study, MgO nanoparticles were successfully fabricated and incubated inside ZnO NPs to form MgO/ZnO nanocomposite for biomedical applications. The x-ray diffraction analysis of MgO, ZnO, and MgO/ZnO has shown the single-phase x-ray diffraction patterns through X'pert High score. The crystallite sizes were calculated as 18 nm, 42 nm, and 53 nm, respectively. The average particle size of MgO, ZnO, and MgO/ZnO nanopowders depicted from secondary electron images of field emission electron microscopy were 56 nm, 400 nm, and 450 nm, respectively. The presence of MgO NPs inside ZnO NPs was confirmed by transmission electron microscopy. The elemental dispersive spectroscopy of MgO, given the peaks of oxygen and magnesium, also showed only zinc and oxygen peaks in ZnO, which confirms no other impurities in MgO and ZnO powders. The elemental analysis of MgO/ZnO nanocomposite showed the peaks of Zinc and Oxygen, along with a tiny peak of Mg. The photoluminescence and UV–vis spectroscopy revealed the absorbance fluorescence limit of the nanomaterials. Fourier transform infrared spectroscopy confirmed the several groups present in the nanocomposite. The biocompatibility of MgO, ZnO, and MgO/ZnO was observed with human peripheral blood mononuclear cells. The cytotoxicity studies were also performed against human cancer (liver and breast) cell lines. The MgO, ZnO, and MgO/ZnO exhibited the antimicrobial properties against Escherichia coli and Staphylococcus aureus.     

Software fault prediction using Nonlinear Autoregressive with eXogenous Inputs (NARX) network

This paper explores a new approach for predicting software faults by means of NARX neural network. Also, a careful analysis has been carried out to determine the applicability of NARX network in software reliability. The validation of the proposed approach has been performed using two real software failure data sets. Comparison has been made with some existing parametric software reliability models as well as some neural network (Elman net and TDNN) based SRGM. The results computed shows that the proposed approach outperformed the other existing parametric and neural network based software reliability models with a reasonably good predictive accuracy.     

Modal analysis of human body vibration model for Indian subjects under sitting posture

Need and importance of modelling in human body vibration research studies are well established. The study of biodynamic responses of human beings can be classified into experimental and analytical methods. In the past few decades, plenty of mathematical models have been developed based on the diverse field measurements to describe the biodynamic responses of human beings. In this paper, a complete study on lumped parameter model derived from 50th percentile anthropometric data for a seated 54- kg Indian male subject without backrest support under free un-damped conditions has been carried out considering human body segments to be of ellipsoidal shape. Conventional lumped parameter modelling considers the human body as several rigid masses interconnected by springs and dampers. In this study, concept of mass of interconnecting springs has been incorporated and eigenvalues thus obtained are found to be closer to the values reported in the literature. Results obtained clearly establish decoupling of vertical and fore-and-aft oscillations.     

Multiresolution approach for multiple human detection using moments and local binary patterns

Human detection is a central problem in development of any surveillance application. In this study, we present a simple and efficient, multi-resolution gray scale invariant approach for multiple human detection. The multiresolution is important for objects of different size and gray scale invariance is important due to uneven illumination and within-class variability. The proposed method is based on integration of central moments upon multi-resolution gray scale invariant local binary patterns operator. Since, the local binary patterns operator is invariant against different resolutions of space scale and monotonic change in gray scale, therefore the proposed method is robust in terms of variations in space scale as well as gray scale. Another advantage is high computational accuracy of the method due to use of moment operator which enhances the efficiency of the proposed method. Moreover, the proposed method is simple, as these operations can be performed within a few steps in a small neighborhood and a lookup table. The proposed method is tested on multiple human images and experimentally found appropriate for multiple human detection. The proposed method has been evaluated over two datasets, one is our own created dataset and the other is standard INRIA human detection dataset. Experimental results obtained from the proposed method demonstrate that better discrimination can be achieved for human and non-human objects in real scenes.     

New Technology Introduction and Implementation: The Case of Paging Technology in the Ratlam Division of Indian Railways

Concomitant to the liberalisation policy and market reforms in India has been the issue of declining budgetary support for public sector organisations. Hitherto, Indian Railways, the biggest publicly-owned enterprise, has largely been supported by the exchequer. Since the early 1990s, however, the Railways has had to operate increasingly as a commercial rather than a social organisation. One of the ways of improving efficiency is to introduce efficiency-enhancing technologies. This paper is a case study of the introduction of paging technology to the Ratlam Division of Indian Railways. It describes the process of planning and implementation, the HRM implications of the adoption and how the process was successfully managed. It aims at shedding further light on the nature and the processes whereby technologies eventually gain company recognition and acceptance.