Solution combustion synthesis of cerium oxide nanoparticles as corrosion inhibitor

In this study, combustion synthesis of cerium oxide nanoparticles was reported using cerium nitrate hexahydrate as starting material as well as urea, glycine, glucose, and citric acid as fuels. The influence of fuel type on structure, microstructure, band gap, and corrosion inhibition was investigated. X-ray diffraction (XRD) patterns and scanning electron microscopy micrographs showed that CeO₂ nanoparticles with different morphologies were obtained depending on the fuel type. Microstructural changes from unreacted gel to sponge-like morphologies were resulted by varying the fuel type from urea, glycine, and glucose to citric acid. In addition to Ce–O bonds, Fourier transform infrared analysis showed carbon bonds of carbonaceous compositions from incomplete combustion which were declined during combustion reaction. Furthermore, corrosion analyses showed that samples synthesized using urea fuel released the most Ce⁺⁴ ions and could have better protection than other samples.     

Evaluation of Fracture Mechanisms in Al-Si Metal Matrix Nanocomposites Produced by Three Methods of Gravity Sand Casting,Squeeze Casting and Compo Casting in Semi-Solid State

Silicon - Magnetic stirring is considered to be the most useful stirring method in semi-solid casting processes which doesn’t have the restrictions of the mechanical stirring. In this...     

Alcohol-mediated haemolysis in yeast

Although yeast are generally non-haemolytic, we have found that addition of alcohol vapour confers haemolytic properties on many strains of yeast and other fungi. We have called this phenomenon 'microbial alcohol-conferred haemolysis' (MACH). MACH is species- and strain-specific: whereas all six Candida tropicalis strains tested were haemolytic in the presence of ethanol, none among 10 C. glabrata strains tested exhibited this phenomenon. Among 27 C. albicans strains and 11 Saccharomyces cerevisiae strains tested, ethanol-mediated haemolysis was observed in 11 and 4 strains, respectively. Haemolysis is also dependent on the alcohol moiety: n-butanol and n-pentanol could also confer haemolysis, whereas methanol and 2-propanol did not. Haemolysis was found to be dependent on initial oxidation of the alcohol. Reduced haemolysis was observed in specific alcohol dehydrogenase mutants of both Aspergillus nidulans and S. cerevisiae. MACH was not observed during anaerobic growth, and was reduced in the presence of pararosaniline, an aldehyde scavenger. Results suggest that initial oxidation of the alcohol to the corresponding aldehyde is an essential step in the observed phenomenon.     

Efficacy of synbiotic supplementation in patients with nonalcoholic fatty liver disease: A systematic review and meta-analysis of clinical trials: Synbiotic supplementation and NAFLD

ABSTRACT

Objective: We systematically reviewed available randomized clinical trials (RCTs) to elucidate the overall effects of synbiotic supplementation in patients with nonalcoholic fatty liver disease (NAFLD).

Methods: PubMed, Scopus, ISI Web of science and Google Scholar were searched up to December, 2017. All RCTs using synbiotic supplements to treat NAFLD included in this systematic review and meta-analysis. Mean Difference (MD) was pooled using a random-effects model.

Results: Eleven eligible databases from seven RCTs were identified for the present meta-analysis. Our results showed that synbiotic supplementation can decrease body weight, fasting blood sugar, insulin, low density lipoprotein cholesterol, total cholesterol, triglyceride, high-sensitivity C-reactive protein, tumor necrosis factor alpha, alanine transaminase and aspartate transaminase levels among patients with NAFLD. In contrast, synbiotic did not have favorable effects on body mass index (BMI), waist circumference, homeostasis model assessment for insulin resistance (HOMA-IR), and high density lipoprotein cholesterol (HDL) levels compared with the placebo group.

Conclusion: The current study revealed that synbiotic supplementation has favorable effect on inflammatory factors, liver enzymes and some anthropometric indices, lipid profiles and glucose homeostasis parameters in patients with NAFLD.     

Polypropylene cellulose‐based composites: The effect of bagasse reinforcement and polybutadiene isocyanate treatment on the mechanical properties

Using bagasse fiber as the reinforcing filler and polypropylene as the thermoplastic matrix polymer, a reinforced composite was prepared, and its mechanical properties examined as a function of the amount of compatibilizing agents used. In the sample preparation, four levels of fiber loading (10, 20, 30, and 40 wt %), three levels of polybutadiene isocyanate (PBNCO) content (0, 2, and 4 wt %) and two levels of maleated polypropylenes (MAPP) content (0 and 3 wt %) as compatibilizing agents were used. The tensile properties of the composites improved as the fiber loading and the compatibilizing agents increased, but the impact strength was significantly decreased. The mechanical study revealed that the positive effect of compatibilizing agents on interfacial bonding. The composites treated with PBNCO showed superior tensile and impact properties than those without treatment. The findings indicated that bagasse as agro‐waste material is a valuable renewable natural resource for composite production and could be utilized as a substitute for wood in composite industries. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Sustainable Oxidative Cleavage of Vegetable Oils into Diacids by Organo-Modified Molybdenum Oxide Heterogeneous Catalysts

Exploiting vegetable oils to produce industrially valuable diacids via an eco‐friendly process requires an efficient and recyclable catalyst. In this work, a novel catalytic system based on organo‐modified molybdenum trioxide was synthesized by a green hydrothermal method in one simple step, using Mo powder as precursor, hydrogen peroxide, and amphiphilic surfactants cetyltrimethylammonium bromide (CTAB) and tetramethylammonium bromide (TMAB) as capping agents. The synthesized materials were first characterized by different techniques including XRD, SEM, TGA, and FT‐IR. Interestingly, various morphologies were obtained depending on the nature of the surfactants and synthetic conditions. The synthesized catalysts were employed in oxidative cleavage of oleic acid, the most abundant unsaturated fatty acid, to produce azelaic and pelargonic acids with a benign oxidant, H₂O₂. Excellent catalytic activities resulting in full conversion of initial oleic acid were obtained, particularly for CTAB‐capped molybdenum oxide (CTAB/Mo molar ratio of 1:3) that gave 83 and 68% yields of production of azelaic and pelargonic acids, respectively. These are the highest yields that have been obtained for this reaction by heterogeneous catalysts up to now. Moreover, the CTAB‐capped catalyst could be conveniently separated from the reaction mixture by simple centrifugation and reused without significant loss of activity up to at least four cycles.     

Emulation of gas‐liquid flow in packed beds for offshore floating applications using a swell simulation hexapod

A laboratory‐scale packed column was positioned on a six degree of freedom swell simulation hexapod to emulate the hydrodynamics of packed bed scrubbers/reactors onboard offshore floating systems. The bed was instrumented with wire mesh capacitance sensors to measure liquid saturation and velocity fields, flow regime transition, liquid maldistribution, and tracer radial and axial dispersion patterns while robot was subject to sinusoidal translation (sway, heave) and rotation (roll, roll + pitch, yaw) motions at different frequencies. Three metrics were defined to analyze the deviations induced by the various column motions, namely, coefficient of variation and degree of uniformity for liquid saturation fluctuating fields, and effective Péclet number. Nontilting oscillations led to frequency‐independent maldistribution while tilting motions induced swirl/zigzag secondary circulation and prompted nonuniform maldistribution oscillations that deteriorated with decreasing frequencies. Regardless of excited degree of freedom, a qualitative loss of plug‐flow character was observed compared with static vertical beds which worsened as frequencies decreased. © 2015 American Institute of Chemical Engineers AIChE J, 61: 2354–2367, 2015     

Additive Manufacturing of Graphene–Hydroxyapatite Nanocomposite Structures

In this article, a powder‐bed class of additive manufacturing (AM) is incorporated into the manufacturing of graphene nanocomposite 3D structures. For AM of graphene‐based 3D structures, graphene oxide (GO)/hydroxyapatite (Hap) nanocomposite (GHN) was synthesized at different GO to Hap percentage (wt.%), including 0.2% and 0.4% to develop a printable powder. The synthesized powder was utilized in a powder‐bed AM system to fabricate 3D porous structures of GHN powder. It was shown that at layer thickness of 125 μm and core binder saturation level of 400%, the compressive mechanical strength of the samples with higher content of graphene was improved significantly.     

Investigation on the morphological and mechanical properties of (polyamide 6)/(poly[styrene‐co‐acrylonitrile])/(poly[styrene‐b‐{ethylene‐co‐butylene}‐b‐styrene]) ternary blends

In this work, ternary polymer blends based on (polyamide 6)/(poly[styrene‐co‐acrylonitrile])/(poly[styrene‐b‐{ethylene‐co‐butylene}‐b‐styrene]) (SEBS) triblock copolymer and a varying concentration of the reactive (maleic anhydride)‐grafted SEBS were prepared by using a melt‐blending process. The effects of the material parameters (composition of ternary blends and SEBS/[{maleic anhydride}‐grafted SEBS] concentration ratio) and blending sequence on the morphological and mechanical properties of ternary blends were studied. Taguchi experimental design methodology was employed to design the experiments and select the material and processing parameters for the optimized mechanical properties. Tensile properties (Young's modulus and yield stress) and impact strength were considered as the response variables. It was demonstrated that there is a meaningful relationship between the composition of blends, processing parameters, observed phase structure, and obtained mechanical properties. The mechanical tests showed that the highest impact strength was achieved as the dispersion of the rubbery phase achieved an optimum size of about 1 μm. J. VINYL ADDIT. TECHNOL., 23:329–337, 2017. © 2015 Society of Plastics Engineers