Changes in the microbiological and chemical characteristics of an artisanal Turkish white cheese during ripening

Changes in the physico-chemical and microbiological properties of artisanal Turkish White cheese were studied throughout 105 days of ripening. Total solid, fat in solid, titratable acidity, pH, salt in total solid, total nitrogen, water-soluble nitrogen, ripening index, amino acids and biogenic amines were determined. Also, the counts of lactic acid bacteria, yeast, moulds and coliforms were done. Biogenic amines in cheeses were tyramine, histamine and phenyletylamine while tryptamine was the only detected at the beginning of maturation at the low concentration. Tyramine content increased during ripening reaching, 12.36 mg/kg at 75 days. A significant correlation could not be found (P>0.05) between microorganisms and biogenic amines. Data points represent averages of three experiments.     

Some properties of bacterial cellulose produced by new native strain Gluconacetobacter sp. A06O2 obtained from Turkish vinegar

The aim of the study was to isolate and identify an acetic acid bacterial strain having high cellulose yield and to investigate some physicochemical properties of bacterial cellulose (BC). Acetic acid bacteria were isolated by using 62 samples (vinegar, fruit, vegetable, and soil) from different region of Turkey. The cellulose production ability of 153 isolates was determined. A strain (A06O2) having high and stable cellulose yield was identified by biochemical tests and 16S rRNA gene sequencing and compared with type strain Gluconacetobacter xylinus NRRL B‐759. Based on the results, strain A06O2 was named at the genus level as Gluconacetobacter, however, species level identification could not be made. Celluloses from both strains were purified to investigate the physicochemical properties such as thermal properties, solubility in various solvents, elemental composition, tensile properties, and surface properties by FTIR and SEM. The results showed that the cellulose samples of two bacterial strains differed in the physicochemical properties. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Learning feature-projection based classifiers

This paper aims at designing better performing feature-projection based classification algorithms and presents two new such algorithms. These algorithms are batch supervised learning algorithms and represent induced classification knowledge as feature intervals. In both algorithms, each feature participates in the classification by giving real-valued votes to classes. The prediction for an unseen example is the class receiving the highest vote. The first algorithm, OFP.MC, learns on each feature pairwise disjoint intervals which minimize feature classification error. The second algorithm, GFP.MC, constructs feature intervals by greedily improving the feature classification error. The new algorithms are empirically evaluated on twenty datasets from the UCI repository and are compared with the existing feature-projection based classification algorithms (FIL.IF, VFI5, CFP, k-NNFP, and NBC). The experiments demonstrate that the OFP.MC algorithm outperforms other feature-projection based classification algorithms. The GFP.MC algorithm is slightly inferior to the OFP.MC algorithm, but, if it is used for datasets with large number of instances, then it reduces the space requirement of the OFP.MC algorithm. The new algorithms are insensitive to boundary noise unlike the other feature-projection based classification algorithms considered here.     

Production of diesel fractions by catalytic cracking of vacuum gas oil and its mixture with cottonseed oil under the influence of a magnetic field

The influence of the 0.4?T magnetic field on catalytic cracking of the vacuum gasoil and its mixture with 5% cottonseed oil was evaluated. Magnetic field intensity excites aromatic resins existing in the vacuum gasoil and causes more effective cracking. Catalytic cracking was conducted using commercial X-zeolite fluid catalytic cracking catalyst and reaction products, especially gasoline and diesel fractions were analyzed in detail. Magnetic field increased the yield of the diesel fraction from 7 to 33% and enriched its composition with aromatic hydrocarbons while opposite effect was observed in gasoline. Cracking mechanisms in formation of gasoline and diesel range hydrocarbons were briefly discussed.     

Simulation of a VAV air conditioning system in an existing building for the cooling mode

In this study, simulation of a variable air volume (VAV) air conditioning system in an existing office building is presented for the cooling mode. A building simulation package was used for the simulation [DOE, EnergyPlus Engineering Document, Version 1.3., U.S. Department of Energy, Washington, DC, 2005]. The design information of the existing office building, the actual number of the internal load sources such as occupants, lighting, office equipments and the manufacturer's data for the existing rooftop unit (RTU) and the VAV boxes were used in the building simulation package. The simulation results; RTU power consumption, indoor zone temperature and relative humidity, were validated with the data obtained from the on-site measurements performed in the existing office building under the same outdoor conditions. It was found that 71.1% of all simulated power consumption data falls within ±15% range from the experimental data. The reason for the existence of some data out of band is due to the possible errors associated with the difference in the solar data used for the location 40 km away from the experimental location. It was found that 90.6-94.7% of the indoor temperature experimental data fall within ±1.5 °C range from the simulated data, and 88.3-91.3% of the indoor relative humidity data fall within ±18% range from the simulated data.     

Assessment of wind power potential for turbine installation in coastal areas of Turkey

This paper analyses the potential and the feasibility basis for the wind energy resources in some locations of coastal regions of Turkey. The dominant wind directions, the mean values, wind speeds, wind potential and the frequency distributions were determined. The results showed that Bal?kesir and Çanakkale among annual averages show higher value of mean wind speed. The mean annual value of Weibull shape parameter k is between 1.54 and 1.86 while the annual value of scale parameter c is between 2.52 m/s and 8.34 m/s. A technical assessment has been made of electricity generation from four wind turbines having capacity of 600 kW, 1500 kW, 2000 kW and 2500 kW. The yearly energy output and capacity factor for the four different turbines were calculated.     

Using MODIS snow cover maps in modeling snowmelt runoff process in the eastern part of Turkey

Water perhaps is the most valuable natural asset in the Middle East as it was a historical key for settlement and survival in Mesopotamia, “the land between two rivers”. At present, the Euphrates and Tigris are the two largest trans-boundary rivers in Western Asia where Turkey, Syria, Iran, Iraq and Saudi Arabia are the riparian countries. The Euphrates and Tigris basins are largely fed from snow precipitation whereby nearly two-thirds occur in winter and may remain in the form of snow for half of the year. The concentration of discharge mainly from snowmelt during spring and early summer months causes not only extensive flooding, inundating large areas, but also the loss of much needed water required for irrigation and power generation purposes during the summer season. Accordingly, modeling of snow-covered area in the mountainous regions of Eastern Turkey, as being one of the major headwaters of Euphrates-Tigris basin, has significant importance in order to forecast snowmelt discharge especially for energy production, flood control, irrigation and reservoir operation optimization.A pilot basin, located on the upper Euphrates River, is selected where five automated meteorological and snow stations are installed for real time operations. The daily snow cover maps obtained from Moderate Resolution Imaging Spectroradiometer MODIS at 500 m resolution are compared with ground information for the winter of 2002-2003 both during accumulation and ablation and at accumulation stage for the winter of 2003-2004. The snow presence on the ground is determined from the snow courses performed. Such measurements were made at 19 points in and around the upper Euphrates River in Turkey and at 20 points in the upper portion of the pilot basin for the winters of 2002-2003 and 2003-2004, respectively. Comparison of MODIS snow maps with in situ measurements over the snow season show good agreement with overall accuracies ranging between 62% and 82% considering the shift in the days of comparison. The main reasons to have disagreement between MODIS and in situ data are the high cloud cover frequency in the area and the current version of the MODIS cloud-mask that appears to frequently map edges of snow-covered areas and land surfaces. The effect of elevation and land cover types on validation of MODIS snow cover maps is also analyzed. In order to minimize the cloud cover and maximize the snow cover, MODIS-8 daily snow cover products are used in deriving the snow depletion curve, which is one of the input parameters of the snowmelt runoff model (SRM). The initial results of modeling process show that MODIS snow-covered area product can be used for simulation and also for forecasting of snowmelt runoff in basins of Turkey.     

Strategic Management Practices in Turkish Construction Firms

This paper presents a study that aims to define the present position of Turkish construction companies in terms of strategic management. It is based on a survey measuring strengths and weaknesses in the “strategic management” practices of Turkish construction companies, and thus reveals potential opportunities and threats in a generalized manner. The results highlight the current strategic management practice of construction firms for designing their own future. Toward this aim, a detailed questionnaire was administered to 52 construction companies. The culture of companies and their perceptions of strategic management were shown to have serious shortcomings. However, specialization on different project types through joint venture companies established by their partners was found to be a major strength of many companies. These companies also pointed out the developing and unstable nature of both the political and economic structure of Turkey as their most significant threat. This disadvantage has inclined many firms to choose investment in the private sector as a response.     

Phase Equilibria for Ternary Liquid Systems of (Water + Carboxylic Acid + 1‐Heptanol) at 293.15 K: Modelling Considerations

Liquid‐liquid equilibrium data of the solubility curves and tie‐line end compositions are presented for mixtures of [water (1) + formic acid, or acetic acid, or propanoic acid (2) + 1‐heptanol (3)] at T = 293.15 K and P = (101.3 ± 0.7) kPa. The properties and liquid‐liquid equilibria (LLE) of associated ternary systems have been correlated using a solvatochromic approach SERLAS. The tie‐lines were also predicted using the UNIFAC‐original model. The proposed model appears to be an improvement in data fit for the ternary systems yielding a mean error of 3.8% for all the systems considered.