石化装置仪表控制系统供电的可靠性设计

介绍了仪表控制系统的供电原则及仪表控制系统的负荷分配方案。包括冗余供电仪表控制系统的电源配置、冗余型24VDC电源装置的电源配置、非冗余供电的控制系统及仪表的电源配置方案。     

选择测试阀在现场测试中的应用

选择测试阀是新一代全通径压控式测试器，在结构和性能上有了本质的创新，使现场操作更加简便、安全，对井筒条件要求低，更适用于高温、高压、深井、气井的地层测试，拓宽了地层测试和其它井下作业的兼容性。经7井次应用，其安全性、可靠性越来越得到认可。     

利用黄河泥沙加固下游大堤

黄河是一条举世闻名的多泥沙河流，善淤、善决、善徒给沿河人民带来对过深重灾难，防洪问题一直是国家的心腹之患。泥沙问题是黄河防洪问题的症结所在。在总结固大堤经验的基础，进行挖河疏浚，淤筑“相对地下河”，已作为黄河治理的一项重大决策付诸实施。     

中国古典园林三维造型研究

论述了采用层次结构化及参数化三维造型方法，建立一个以造型函数库为核心，从而构造各类、各级园林景观构件表面模型的方法和过程。对于某些非建筑类的园林配景构件，采用了Ｆｒａｃｔａｌ方法进行造型。     

有限区间信号边界效应问题的研究

研究了截断信号边界的“吉布斯”现象及数字滤波器相位特性对有限区间信号滤波处理的影响，在阐明了有限区间信号处理中边界效应物理本质的基础上，探讨了数字信号处理中通常所采用的边界处理方法的有效性问题，提出了一种命名为端值延拓法的新的边界处理方法，通过比较分析和实例验证表明这种方法的优越性，文中以零相位数字滤波及运用MALLAT算法对有限区间信号进行小波分解与重构为实例，介绍了其边界效应问题及解决方案，取得了很好的效果。     

A study of CaCO3 fouling with a microscopic imaging technique

The present study introduces a new experimental method to visualize the fouling process of CaCO₃. A mini-channel heat exchanger system with a microscopic imaging technique was developed for real-time visualization of the fouling process. The present study discussed how scale started initially, how scale formed thick layers, and how a small crystal grew into a large one, touching the adjacent one. Detail microscopic images of scale crystals and corresponding fouling resistances were obtained over the entire fouling process. The microscopic observation indicated that the fouling process could be divided into three stages: an induction period, a period of uniform generation of nuclei, and a period of uniform growth of scale. Sudden appearance of numerous small nuclei indicated the end of the induction period, a key event before the rapid increase in the fouling resistance. The present experimental method using microscopic images of the wet fouling process provides a valuable insight on the fouling mechanism.     

风扇磨煤机ZGMn13冲击板的失效分析

ZGMn13冲击板的失效方式为不同角度的粒子撞击和冲刷，其表面可以分为三个典型的磨损区域：低角度撞击区、高角度撞击区和冲刷区。详细分析了该三个磨损区域的磨损机理。次表面分析的结果表明，在低负度撞击和冲刷条件下，高锰钢未能充分加工硬化，耐磨性提高有限。     

含铌钢板坯连铸二冷目标温度及配水

讨论连铸生产过程中铸坯温度对含Nb钢高温塑性的影响，在此基础上确定铸坯在二冷段各区的表面目标温度，介绍计算二冷配水的方法，并讨论中间罐钢水温度对二冷配水的影响。     

Quantitative analysis of Ni effect on CCT diagrams of novel air-cooled bainite steels using artificial neural network models

The quantitative effect of Ni content on continuous cooling transformation （CCT） diagrams of novel air-cooled bainite steels was analyzed using artificial neural network models. The results showed that Ni may retard the high- and medium-temperature transformation and martensite transformation. The results conform to the materials science theories.     

Preparation, sintering, and microstructures of strontium barium bismuth tantalate layered perovskite ceramics

The solid solutions of Ba-doped SrBi₂Ta₂O₉ layered perovskite ceramic powders have been successfully prepared via a two-step process using BiTaO₄ as a precursor. The lattice constants of the solid solutions monotonically increase with increasing barium-ion content. The sinterability of (Sr_1–xBa_x)Bi₂Ta₂O₉ powders is significantly improved by increasing the barium-ion content. When the specimens with high barium-ion contents are sintered at 1100°C, they thermally decompose to form rod-like grains and the matrix expands, leading to a lower density. The addition of barium ions to SrBi₂Ta₂O₉ also results in significant variation in the morphology of the sintered specimens and the occurrence of c-axis preferred orientation which is ascribed to the anisotropic growth of plate-like grains. The precise control of the barium-ion content as well as the sintering conditions is critical for obtaining densified barium-ion doped SrBi₂Ta₂O₉ ceramics with a pure, layered perovskite structure.